Garmin zumo 350LM User manual

zūmo® 300 Series
Owner’s Manual
June 2012 190-01457-00_0B Printed in Taiwan

All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
TracBack®, Garmin®, the Garmin logo, and zūmo® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BaseCamp™,
HomePort™, myGarmin™, myTrends™, nüMaps Guarantee™, nüMaps Lifetime™, and trafficTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. microSD™ is a trademark
of SD-3C. Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac® is a trademark
of Apple Computer, Inc.
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio® and the HD logo are proprietary
trademarks of iBiquity Digital Corporation.

Table of Contents
Getting Started............................................................... 1
Mounting Your Device in a Motorcycle...................................... 1
About the Powered Mount Cables........................................ 1
Installing the Handlebar Base............................................... 1
Attaching the Power Cables to the Motorcycle Mount.......... 1
Attaching the Base Plate to the Motorcycle Mount............... 2
Attaching the Base Plate to the Handlebar Base.................. 2
Installing Your Device in the Motorcycle Mount.................... 2
Removing Your Device from the Motorcycle Mount................... 2
Mounting Your Device in an Automobile.................................... 2
About myDashboard.................................................................. 3
Setting Up myDashboard...................................................... 3
Registering the Device.......................................................... 3
Updating the Software........................................................... 3
nüMaps Guarantee™............................................................ 3
Updating Maps...................................................................... 3
Turning Off the Device............................................................... 3
Resetting the Device............................................................. 3
About Sleep Mode..................................................................... 3
Entering Sleep Mode............................................................. 3
Exiting Sleep Mode............................................................... 3
Adjusting the Screen Brightness................................................ 3
Adjusting the Volume................................................................. 3
Status Bar Icons......................................................................... 3
Acquiring GPS Signals.......................................................... 3
Transportation Modes........................................................... 4
Battery Information................................................................ 4
Setting the Time.................................................................... 4
Using the On-Screen Buttons.................................................... 4
Using the On-Screen Keyboard................................................. 4
About Shortcuts......................................................................... 4
Adding a Shortcut Icon.......................................................... 4
Removing a Shortcut............................................................. 4
Finding Locations.......................................................... 4
About Locations......................................................................... 4
Finding a Location by Category............................................ 4
Finding a Location Using the Search Bar.............................. 4
Changing the Search Area.................................................... 5
Reporting a Closed or Missing Location............................... 5
Rating a Point of Interest....................................................... 5
About Search Tools................................................................... 5
Finding an Address............................................................... 5
Finding an Intersection.......................................................... 5
Finding a City........................................................................ 5
Finding a Location Using Coordinates.................................. 5
Finding a Location by Browsing the Map.............................. 5
Saving a Home Location............................................................ 5
Going Home.......................................................................... 5
Editing Your Home Location Information.............................. 5
Finding Recently Found Destinations........................................ 5
Clearing the List of Recently Found Locations...................... 5
Finding Parking.......................................................................... 5
Finding Your Last Parking Spot............................................ 6
Setting a Simulated Location..................................................... 6
Saving Locations........................................................................ 6
Saving a Location.................................................................. 6
Saving Your Current Location............................................... 6
Starting a Route to a Saved Location................................... 6
Editing a Saved Location...................................................... 6
Assigning Categories to a Saved Location........................... 6
Sharing a Saved Location..................................................... 6
Sending a Location to the Device......................................... 6
Deleting a Saved Location.................................................... 6
Navigation.......................................................................6
Starting a Route......................................................................... 6
Changing the Route Calculation Mode................................. 6
Previewing Multiple Routes................................................... 6
Starting a Route to a Saved Location................................... 7
Your Route on the Map.............................................................. 7
Using the Navigation Map..................................................... 7
Adding a Point to a Route..................................................... 7
Taking a Detour..................................................................... 7
Stopping the Route............................................................... 7
Using Suggested Routes...................................................... 7
About Exit Services.................................................................... 7
Finding Exit Services............................................................. 7
Navigating to an Exit............................................................. 7
Avoiding Road Features............................................................ 7
About Custom Avoidances......................................................... 7
Avoiding an Area................................................................... 7
Avoiding a Road.................................................................... 7
Disabling a Custom Avoidance............................................. 7
Deleting Custom Avoidances................................................ 7
Enabling Advanced Detours...................................................... 8
Taking a Detour Around Specified Areas.............................. 8
Navigating Off Road................................................................... 8
Enabling Fuel Tracking.............................................................. 8
Setting a Low Fuel Warning.................................................. 8
Map Pages...................................................................... 8
Customizing the Map................................................................. 8
Customizing the Map Layers................................................. 8
Viewing the Trip Log............................................................. 8
Changing the Map Data Field............................................... 8
Customizing Map Buttons..................................................... 8
Changing the Map Dashboard.............................................. 8
Changing the Map Perspective............................................. 8
Viewing Turns............................................................................ 8
Viewing a List of Turns.......................................................... 8
Viewing the Next Turn........................................................... 9
Viewing Junctions................................................................. 9
Viewing Traffic Alerts............................................................ 9
Viewing Trip Information....................................................... 9
Viewing Current Location Information........................................ 9
Finding Nearby Services....................................................... 9
Getting Directions to Your Current Location......................... 9
Hands-Free Voice Prompts........................................... 9
About Wireless Headsets........................................................... 9
Enabling Bluetooth Wireless Technology.............................. 9
Pairing a Wireless Headset........................................................ 9
Deleting a Paired Headset.................................................... 9
Disconnecting Your Headset................................................. 9
Tips After Pairing the Devices............................................... 9
Using the Apps...............................................................9
Using Help................................................................................. 9
Searching Help Topics........................................................ 10
Planning a Trip......................................................................... 10
Scheduling a Trip................................................................ 10
Changing Transportation Modes in a Trip........................... 10
Navigating to a Saved Trip.................................................. 10
Editing a Saved Trip............................................................ 10
TracBack®............................................................................... 10
Following Your Recent Track.............................................. 10
Saving Your Recent Track as a Trip................................... 10
Using the Compass.................................................................. 10
Viewing Previous Routes and Destinations............................. 10
Logging Service History........................................................... 10
Adding Service Categories.................................................. 10
Deleting Service Categories................................................ 10
Table of Contents i

Deleting Service Records.................................................... 10
Editing a Service Record..................................................... 11
Using the World Clock............................................................. 11
Viewing the World Map....................................................... 11
Setting an Alarm...................................................................... 11
Using the Calculator................................................................. 11
Converting Units...................................................................... 11
Setting Currency Conversion Rates.................................... 11
About Offers............................................................................. 11
Viewing Offers..................................................................... 11
Viewing an Offer List........................................................... 11
Disabling Traffic and Offers................................................. 11
Using the Language Guide...................................................... 11
Purchasing the Language Guide......................................... 11
Selecting Languages in the Language Guide..................... 11
Translating Words and Phrases.......................................... 11
Using a Bilingual Dictionary................................................ 11
About Traffic.................................................................11
Receiving Traffic Data.............................................................. 12
Traffic Receiver........................................................................ 12
About the Traffic Icon.......................................................... 12
Traffic on Your Route............................................................... 12
Viewing Traffic on Your Route............................................ 12
Manually Avoiding Traffic on Your Route............................ 12
Taking an Alternate Route.................................................. 12
Viewing Traffic on the Map.................................................. 12
Traffic in Your Area.................................................................. 12
Searching for Traffic Delays................................................ 12
Viewing a Traffic Incident on the Map................................. 12
Understanding Traffic Data...................................................... 12
Traffic Subscriptions................................................................ 12
Subscription Activation........................................................ 12
Disabling Traffic....................................................................... 13
Data Management........................................................ 13
About Data Management......................................................... 13
File Types................................................................................ 13
About Memory Cards............................................................... 13
Installing a Memory Card.................................................... 13
Connecting the Device to Your Computer............................... 13
Transferring Data From Your Computer.................................. 13
Disconnecting the USB Cable............................................. 13
Deleting Files........................................................................... 13
Customizing the Device.............................................. 13
Map and Vehicle Settings........................................................ 13
Enabling Maps.................................................................... 13
Navigation Settings.................................................................. 14
Route Preferences.............................................................. 14
Display Settings....................................................................... 14
Bluetooth Settings.................................................................... 14
Disabling Bluetooth............................................................. 14
Traffic Settings......................................................................... 14
About Traffic Subscriptions................................................. 14
trafficTrends........................................................................ 14
Units and Time Settings........................................................... 14
Language and Keyboard Settings............................................ 14
Device and Privacy Settings.................................................... 14
Proximity Alerts Settings.......................................................... 14
Restoring Settings.................................................................... 14
Appendix.......................................................................15
Power Cables........................................................................... 15
Charging the Device............................................................ 15
About Device Care................................................................... 15
Cleaning the Outer Casing.................................................. 15
Cleaning the Touchscreen.................................................. 15
Avoiding Theft..................................................................... 15
Extending the Battery Life................................................... 15
Changing the Fuse in the Vehicle Power Cable...................... 15
Mounting on Your Dashboard.................................................. 15
Removing the Device, Cradle, and Mount............................... 15
Removing the Device from the Cradle................................ 15
Removing the Cradle from the Mount................................. 15
Removing the Suction Cup Mount from the Windshield...... 15
Updating Maps......................................................................... 15
About nüMaps Lifetime....................................................... 16
Purchasing Additional Maps.................................................... 16
Safety Cameras....................................................................... 16
Custom Points of Interest......................................................... 16
Installing POI Loader Software........................................... 16
Using the POI Loader Help Files......................................... 16
Finding Extras..................................................................... 16
Purchasing Accessories........................................................... 16
Troubleshooting....................................................................... 16
Index..............................................................................17
ii Table of Contents

Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
1Mount the device (page 1).
2Register the device (page 3).
3Check for updates:
• Software updates (page 3).
• Free map update (page 3).
Mounting Your Device in a Motorcycle
About the Powered Mount Cables
WARNING
Garmin strongly recommends having an experienced installer
with the proper knowledge of electrical systems install the
device. Incorrectly wiring the power cable can result in damage
to the vehicle or the battery and can cause bodily injury.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
The device must be mounted in a suitable and secure location
on your motorcycle, based on available power sources and safe
cable routing.
ÀMotorcycle cradle
ÁBare wires with inline fuse for power connection (to motorcycle
power)
Installing the Handlebar Base
The device includes parts for two handlebar installation
solutions. Custom mounts can require additional hardware
(http://www.ram-mount.com).
Installing the U-bolt and Handlebar Base
1Place the U-bolt À around the handlebar Á, and thread the
ends through the handlebar base Â.
2Tighten the nuts to secure the base.
NOTE: The recommended torque is 50 lbf-in. Do not exceed
torque of 80 lbf-in.
Installing the Handlebar Base to the Clutch-Clamp or Brake-
Clamp Brackets
1Remove the two factory bolts on your clutch-clamp or brake-
clamp bracket À.
NOTE: Both 1/4 in. standard and M6 bolts are included.
Match the size of the factory bolts on your clutch-clamp or
brake-clamp bracket.
2Thread the new bolts Á through the handlebar base, spacers
Â, and clutch-clamp or brake-clamp bracket.
3Tighten the bolts to secure the base.
Attaching the Power Cables to the Motorcycle Mount
1Thread the power cable connector À through the top of the
opening in the motorcycle mount.
2Slide the cable down to the bottom of the opening Á and pull
the cable back until it is snug.
3Screw the black screw  into the back of the mount à to
hold the cable in place.
4Thread the weather cap Ä through the top hole and press it
into the hole.
Getting Started 1

Attaching the Base Plate to the Motorcycle Mount
NOTICE
Direct, sustained contact with the base plate, or any part of the
motorcycle, may damage the mount over time. To prevent this
kind of damage, you must place the mounting spacers between
the mount and base plate, and make sure that no part of the
device or mount touches the motorcycle.
1Thread the M4 x 40 mm panhead screws À through the
washers Á, cradle, spacers Â, and base plate Ã.
2Tighten the nuts to secure the base plate.
Attaching the Base Plate to the Handlebar Base
1Align the ball of the handlebar base À and the ball of the
base plate Á with the double-socket arm Â.
2Insert the ball into the double-socket arm.
3Tighten the knob slightly.
4Adjust for optimal viewing and operation.
5Tighten the knob to secure the mount.
6Align the ball of the base plate attached to the cradle  with
the other end of the double-socket arm.
7Repeat steps 2–4.
Installing Your Device in the Motorcycle Mount
1Fit the bottom of your device into the cradle.
2Tilt the device back until it snaps into place.
NOTE: If the latch on top of the mount stays up after you
insert the device, press it down.
Removing Your Device from the Motorcycle
Mount
1Press the button on the side of the mount.
2Lift out the device.
3On the motorcycle mount, place the weather cap on the
power connector in the center of the cable (page 1).
Mounting Your Device in an Automobile
NOTICE
Before mounting the device, check the local laws pertaining to
windshield mounting.
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
1Pull back the weather cap on the back of the cradle.
2Plug the automotive power cable À into the mini-USB
connector Á under the weather cap.
3Remove the clear plastic from the suction cup.
4Clean and dry your windshield and the suction cup with a
lint-free cloth.
5Press the suction cup  to the windshield, and flip the lever
à back toward the windshield.
6Snap the cradle Ä onto the suction cup arm.
2 Getting Started

7Fit the bottom of your device into the cradle.
8Tilt the device back until it snaps into place.
TIP: Press on the logo at the top of the device while holding
the tab at the top of the cradle.
9Plug the other end of the automotive power cable into a
power outlet.
About myDashboard
Use myDashboard to register your device, check for software
and map updates, access product manuals and support, and
more.
Setting Up myDashboard
1Connect the USB cable to the USB port on the back of the
device.
2Connect the USB cable to the USB port on your computer.
3Go to http://www.garmin.com/dashboard.
4Follow the on-screen instructions.
Registering the Device
1Open myDashboard (page 3).
2Click Register Now.
3Follow the on-screen instructions.
Updating the Software
1Open myDashboard (page 3).
2Under Software Updates, click Update Now.
3Follow the on-screen instructions.
nüMaps Guarantee™
To receive one free map update (if available), register your
device at http://my.garmin.com within 90 days of acquiring
satellites while driving with your device. You are not eligible for
the free map update if you register by phone or wait longer than
90 days after the first time you acquire satellites while driving
with your device. For more information, go to
http://www.garmin.com/numaps.
Updating Maps
1Open myDashboard (page 3).
2Register the device (page 3).
3Select an option:
• Under Map Updates, click Update Now.
• If a free map update is no longer available, click Buy
Now.
4Follow the on-screen instructions.
Lifetime Subscriptions
Some models include subscriptions to lifetime features.
LT: This model includes a lifetime traffic subscription and a
traffic receiver (automobile mode only).
LM: This model includes a nüMaps Lifetime™ subscription
(page 16).
LMT: This model includes a nüMaps Lifetime subscription,
lifetime traffic subscription, and a traffic receiver (automobile
mode only).
Turning Off the Device
1Hold the Power key À.
NOTE: If you hold the Power key for less than 5 seconds,
the device enters sleep mode (page 3).
2Select Off.
Resetting the Device
You can reset your device if it stops functioning.
Hold the Power key for 10 seconds.
About Sleep Mode
Use sleep mode to conserve battery power when your device is
not in use. Sleep mode uses very little power, and a battery
charge lasts for weeks when your device is in sleep mode.
Entering Sleep Mode
Press the Power key.
Exiting Sleep Mode
While the device is in sleep mode, press the Power key.
Adjusting the Screen Brightness
1Select Settings > Display > Brightness.
2Use the slider bar to adjust the brightness.
Adjusting the Volume
1Select Volume.
2Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
Status Bar Icons
The status bar is located at the top of the main menu. The
status bar icons display information about features on the
device. You can select some icons to change settings or view
additional information.
GPS signal status.
Bluetooth® technology status (appears when Bluetooth is
enabled).
Transportation mode indicator.
Current time.
Battery status.
Acquiring GPS Signals
To navigate with your device, you must acquire satellites. in
the status bar indicates the satellite signal strength (see
page 3). Acquiring satellites can take several minutes.
1Turn on the device.
2If necessary, go outdoors to an open area, away from tall
buildings and trees.
3If necessary, hold to view detailed information about the
satellite signals.
Getting Started 3

Viewing GPS Signal Status
Hold for three seconds.
Transportation Modes
Motorcycle mode
Automobile mode
Off-road mode (See page 8)
Routing and navigation are calculated differently based on your
transportation mode.
Choosing a Transportation Mode
Select .
Battery Information
After the device is connected to power, it begins to charge.
in the status bar indicates the status of the internal battery.
To increase the accuracy of the battery gauge, you should fully
discharge the battery and then fully charge it. Do not unplug the
device until it is fully charged.
Setting the Time
NOTE: You can select Automatic to automatically set the time
each time the device is powered on.
1Select .
2Scroll the numbers to set the time.
Using the On-Screen Buttons
• Select to return to the previous menu screen.
• Hold to quickly return to the main menu.
• Select or to see more choices.
• Hold or to scroll faster.
• Select to see a menu of options for the current screen.
Using the On-Screen Keyboard
See "Language and Keyboard Settings" to change the keyboard
layout (page 14).
• Select a character on the keyboard to enter a letter or
number.
• Select a series of letters, such as "A-I," to select a letter in
that series.
• Select to add a space.
• Select to delete a search entry.
• Select to delete a character.
• Select to change the keyboard language mode.
• Select to enter special characters, such as punctuation
marks.
• Select to change character capitalization.
About Shortcuts
Adding a Shortcut Icon
You can add shortcuts to the Where To? menu. A shortcut can
point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1Select Where To? > Add Shortcut.
2Select an item.
Removing a Shortcut
1Select Where To? > > Remove Shortcut(s).
2Select the shortcut to remove.
3Select the shortcut again to confirm.
Finding Locations
The device offers many methods for finding locations.
• By category (page 4).
• Near another location (page 5).
• By spelling the name (page 4).
• By address (page 5).
• Using recently found locations (page 5).
• Using coordinates (page 5).
• Using the map (page 5).
• Using saved locations (page 6).
About Locations
The detailed maps loaded in your device contain locations, such
as restaurants, hotels, and auto services. You can use
categories to browse for nearby businesses and attractions.
Finding a Location by Category
1Select Where To?.
2Select a category, or select Categories.
3If necessary, select a subcategory.
4Select a location.
Searching Within a Category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
three destinations you selected.
1Select Where To?.
2Select a category, or select Categories.
3Select a category.
4If applicable, select a destination from the Quick Search list.
5If necessary, select the appropriate destination.
Finding a Location Using the Search Bar
You can use the search bar to search for locations by entering a
category, brand name, address, or city name.
1Select Where To?.
2Select Enter Search in the search bar.
3Enter all or part of the search term.
Suggested search terms appear below the search bar.
4Select an option:
• To search for a type of business, enter a category name
(for example, "movie theaters").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the street
number and street name.
• To search for an address in another city, enter the street
number, street name, city, and state.
• To search for a city, enter the city and state.
• To search for coordinates, enter latitude and longitude
coordinates.
4 Finding Locations

5Select an option:
• To search using a suggested search term, select the
term.
• To search using the text you entered, select .
6If necessary, select a location.
Changing the Search Area
1From the main menu, select Where To?.
2Select Searching Near.
3Select an option.
Reporting a Closed or Missing Location
If your search results include an outdated or incorrect location,
you can report the error to Garmin® and remove the location
from future searches.
1Search for a location (page 4).
2From the search results, select a location.
3Select .
4Select > Edit.
5Select Report as Closed or Report as Missing.
The information is sent to Garmin when you connect your
device to myDashboard using your computer (page 3).
Rating a Point of Interest
You can assign a star rating to a point of interest.
1Search for a location (page 4).
2From the search results, select a location.
3Select .
4Select the stars to rate the point of interest.
The star rating updates on your device.
About Search Tools
You can search for locations by using the on-screen keyboard
or by entering the location address or coordinates.
Finding an Address
NOTE: The order of the steps may change depending on the
map data loaded on your device.
1Select Where To? > Address.
2Enter the address number, and select Done.
3Enter the street name, and select Next.
4If necessary, select Searching Near to change the city,
state, or province.
5If necessary, select the city, the state, or the province.
6If necessary, select the address.
Finding an Intersection
1Select Where To? > Categories > Intersections.
2Select a state or province.
NOTE: If necessary, select State or Country to change the
country, state, or province.
3Enter the first street name, and select Next.
4If necessary, select the street.
5Enter the second street name, and select Next.
6If necessary, select the street.
7If necessary, select the intersection.
Finding a City
1Select Where To? > Categories > Cities.
2Select Enter Search.
3Enter a city name, and select .
4Select a city.
Finding a Location Using Coordinates
Before you can find a location using coordinates, you must add
a shortcut to the coordinates search tool (page 4).
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1Select Where To? > Categories > Coordinates.
2If necessary, select > Format, select the correct
coordinate format for the type of map you are using, and
select Save.
3Select the latitude coordinate.
4Enter the new coordinate, and select Done.
5Select the longitude coordinate.
6Enter the new coordinate, and select Done.
7Select View on Map.
Finding a Location by Browsing the Map
Before you can find places included in the map data, such as
restaurants, hospitals, and fuel stations, you must enable the
map layer for places along the road (page 8).
1Select View Map.
2Drag and zoom the map to display the area to search.
3If necessary, select , and select a category icon to view
only a specific category of places.
Location markers ( or a blue dot) appear on the map.
4Select an option:
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
5If necessary, select the location description to view additional
information.
Saving a Home Location
You can set your home location for the location you return to
most often.
1Select Where To? > > Set Home Location.
2Select Enter My Address, Use Current Location, or
Recently Found.
The location is saved as "Home" in the Saved menu.
Going Home
Select Where To? > Go Home.
Editing Your Home Location Information
You can change the address or phone number for a location
that appears in the search results.
1Select Where To? > Saved > Home.
2Select > > Edit.
3Enter your changes.
4Select Done.
Finding Recently Found Destinations
Your device stores the last 50 destinations you have found.
1Select Where To? > Recent.
2Select a location.
Clearing the List of Recently Found Locations
Select Where To? > Recent > > Clear > Yes.
Finding Parking
1Select Where To? > Categories > Parking.
2Select a parking location.
Finding Locations 5

Finding Your Last Parking Spot
When you remove your device from the vehicle mount while the
device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS to set a simulated location.
1Select Settings > Navigation > GPS Simulator.
2From the main menu, select View Map.
3Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4Select the location description.
5Select Set Location.
Saving Locations
Saving a Location
1Search for a location (page 4).
2From the search results, select a location.
3Select .
4Select > Save.
5If necessary, enter a name, and select Done.
Saving Your Current Location
1From the map, select the vehicle icon.
2Select Save.
3Enter a name, and select Done.
4Select OK.
Starting a Route to a Saved Location
1Select Where To? > Saved.
2If necessary, select a category, or select All Saved Places.
3Select a location.
4Select Go!.
Editing a Saved Location
1Select Where To? > Saved.
2If necessary, select a category.
3Select a location.
4Select .
5Select > Edit.
6Select an option:
• Select Name.
• Select Phone Number.
• To assign categories to the Favorite, select Categories.
• To save a photo with the Favorite, select Assign Photo
(page 6).
• To change the symbol used to mark the Favorite on a
map, select Change Map Symbol.
7Edit the information.
8Select Done.
Assigning Categories to a Saved Location
You can add custom categories to organize your saved
locations.
NOTE: Categories appear in the saved locations menu after
you have saved more than 12 locations.
1Select Where To? > Saved.
2Select a location.
3Select .
4Select > Edit > Categories.
5Enter one or more category names, separate by commas.
6If necessary, select a suggested category.
7Select Done.
Sharing a Saved Location
If you save the location of a business that is not in the map
data, you can share the location with Garmin® so that it can be
added to future map updates and shared with the Garmin
community.
1Select Where To? > Saved.
2If necessary, select a category.
3Select a location.
4Select .
5Select > Share Place.
Sending a Location to the Device
You can send locations to your device from various online
sources, including http://connect.garmin.com.
1Connect your device to your computer (page 13).
2If necessary, install the Garmin Communicator Plugin.
NOTE: Go to http://www.garmin.com/communicator for more
information. On your computer, find a location on a
supported website.
3From the website, select Send to GPS.
NOTE: Some websites may use a different button or link.
4Follow the on-screen instructions.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1Select Where To? > Saved.
2Select > Delete Saved Places.
3Select the box next to the saved locations to delete, and
select Delete.
Navigation
Starting a Route
1Search for a location (page 4).
2Select a location.
3Select Go!.
4If necessary, select a route.
Changing the Route Calculation Mode
The route calculation is based on road speeds and vehicle
acceleration data for a given route. The calculation mode affects
only automobile routes.
Select Settings > Navigation > Calculation Mode.
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
• Select Off Road to calculate point-to-point routes (without
roads).
Previewing Multiple Routes
1Search for a location (page 4).
2From the search results, select a location.
3Select Routes.
4Select a route.
6 Navigation

5Select Go!.
Starting a Route to a Saved Location
1Select Where To? > Saved.
2If necessary, select a category, or select All Saved Places.
3Select a location.
4Select Go!.
Your Route on the Map
The route is marked with a magenta line. A checkered flag
marks your destination.
As you travel, the device guides you to the destination with
voice prompts, arrows on the map, and directions at the top of
the map. If you depart from the original route, the device
recalculates the route and provides new directions.
Using the Navigation Map
1From the main menu, select View Map.
2If the zoom controls are hidden, select the map to display the
zoom controls.
3Select the map.
4Select an option:
• To zoom in or out, select or .
• To rotate the map view, select .
• To switch between North Up and 3-D views, select .
• To add or remove map layers, select .
• To view specific categories, select .
• To center the map on your current location, select .
• To view shortcuts for map and navigation features, select
.
Adding a Point to a Route
Before you can add a stop, you must be navigating a route.
1From the map, select > Where To?.
2Search for the extra stop.
3Select the stop from the search results.
4Select Go!.
5Select Add to Active Route.
Taking a Detour
While navigating a route, you can use detours to avoid
obstacles ahead of you, such as construction zones.
While navigating, select > Detour.
Stopping the Route
From the map, select .
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (page 14).
Using the myTrends™ feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
About Exit Services
While you navigate a route, you can find gas, food, lodging, and
restrooms near upcoming exits.
Services are listed under tabs by category.
Gas
Food
Lodging
Restrooms
Finding Exit Services
1From the map, select > Exit Services.
2Use the arrows to select an upcoming exit.
3Select an exit service tab.
4Select a point of interest.
Navigating to an Exit
1From the map, select > Exit Services > .
2Select Go!.
Avoiding Road Features
1Select Settings > Navigation > Avoidances.
2Select the road features to avoid on your routes, and select
Save.
About Custom Avoidances
Custom avoidances allow you to avoid specific areas and
sections of road. You can enable and disable custom
avoidances as needed.
Avoiding an Area
1Select Settings > Navigation > Custom Avoidances.
2If necessary, select Add Avoidances.
3Select Add Avoid Area.
4Select the upper-left corner of the area to avoid, and select
Next.
5Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6Select Done.
Avoiding a Road
1Select Settings > Navigation > Custom Avoidances.
2Select Add Avoid Road.
3Select the starting point of the section of road to avoid, and
select Next.
4Select the ending point of the road section, and select Next.
5Select Done.
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1Select Settings > Navigation > Custom Avoidances.
2Select an avoidance.
3Select > Disable.
Deleting Custom Avoidances
1Select Settings > Navigation > Custom Avoidances.
2Select an option:
• To delete all custom avoidances, select .
Navigation 7

• To delete one custom avoidance, select the avoidance,
and select > Delete.
Enabling Advanced Detours
Select Settings > Navigation > Advanced Detours.
Taking a Detour Around Specified Areas
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1Select a destination, and select Go! (page 4).
2From the map, select > Detour.
3Select Next 0.5mi on Route, Next 2mi on Route, Next 5mi
on Route, or Detour by Road(s) on Route.
4If necessary, select a road to detour around.
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1Select Settings > Navigation.
2Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Enabling Fuel Tracking
When you enable fuel tracking, a fuel gauge appears on the trip
computer (page 9).
NOTE: Before you can enable fuel tracking, the device must be
in the motorcycle or automobile mount.
1Fill your fuel tank.
2Select an option:
• If you are enabling fuel tracking for the first time, select
Fuel Settings > Fuel Tracking > Distance Per Tank,
and enter the distance the vehicle travels per tank.
• If you have already enabled fuel tracking, select Reset
Fuel Tank for accurate fuel tracking.
Setting a Low Fuel Warning
You can set the device to warn you when the tank is low on fuel.
NOTE: The device must be connected to the motorcycle or
automotive mount to give low fuel warnings.
1Enable fuel tracking (page 8).
2Select Fuel Tank Warning.
3Enter a distance, and select Done.
When you have only enough fuel left to travel the distance you
entered, a low fuel warning appears on the map page.
Map Pages
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the map, such as
icons for points of interest and road conditions.
1From the map, select .
2Select Map Layers.
3Select which layers you want to include on the map, and
select Save.
Viewing the Trip Log
Your device keeps a trip log, which is a record of the path you
have traveled.
1Select Settings > Map & Vehicle > Map Layers.
2Select the Trip Log check box.
Changing the Map Data Field
1From the map, select the data field in the lower left-hand
corner.
2Select a type of data to display.
3Select Save.
Customizing Map Buttons
You can include up to two icons on the right side of the main
map.
1Select Settings > Map & Vehicle > Map Buttons.
2Select an icon, and select OK.
3Select .
4Select a different icon.
Removing Buttons from the Map
You can remove all buttons from the right side of the map.
1Select Settings > Map & Vehicle > Map Buttons.
2Select an icon, and select OK.
3Select Save.
Changing the Map Dashboard
The dashboard displays trip information at the bottom of the
map. You can select different dashboards to change the style
and the layout of the information.
1Select Settings > Map & Vehicle > Dashboards.
2Use the arrows to select a dashboard.
3Select Save.
Changing the Map Perspective
1Select Settings > Map & Vehicle > Driving Map View.
2Select an option:
• Select Track Up to display the map in two dimensions (2-
D), with your direction of travel at the top.
• Select North Up to display the map in 2-D with North at
the top.
• Select 3-D to display the map in three dimensions.
Viewing Turns
Viewing a List of Turns
When you are navigating a route, you can view all of the turns
and maneuvers for your entire route and the distance between
turns.
1While navigating a route, select the text bar on the top of the
map.
2Select a turn.
The details for the turn appear. If available, an image of the
junction appears for junctions on major roadways.
Viewing the Entire Route on the Map
1While navigating a route, select the navigation bar at the top
of the map.
2Select > Map.
8 Map Pages

Viewing the Next Turn
While navigating an automobile route, a preview of the next
turn, lane change, or other maneuver appears in the upper-left
corner of the map.
The preview includes the distance to the turn or maneuver and
the lane in which you should be traveling, if available.
From the map, select to view the next turn on the map.
Viewing Junctions
While navigating a route, you can view the junctions on major
roadways. When you approach a junction in a route, the image
of that junction appears briefly, if available.
From the map, select to view the junction, if available.
Viewing Traffic Alerts
While you navigate an automobile route, a traffic alert may
appear in the navigation bar.
Select the alert to view more information.
Viewing Trip Information
The trip information page displays your present speed and
provides statistics about your trip.
NOTE: If you make frequent stops, leave the device turned on,
so it can accurately measure elapsed time during the trip.
From the map, select > Trip Computer.
Resetting Trip Information
1From the map, select > Trip Computer.
2Select > Reset Field(s).
3Select an option:
• When not navigating a route, select Select All to reset
every data field except the speedometer, on the first
page.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing Current Location Information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select > Where Am I?.
Finding Nearby Services
You can use the Where Am I? page to find nearby services,
such as hospitals or police stations.
1From the map, select > Where Am I?.
2Select a category.
Getting Directions to Your Current Location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
Select Apps > Where Am I? > > Directions to Me.
Hands-Free Voice Prompts
About Wireless Headsets
Using wireless technology, your device can send audio
navigation prompts to a wireless headset. For more information,
go to http://www.garmin.com/bluetooth.
Enabling Bluetooth Wireless Technology
1Select Settings > Bluetooth.
2Select Bluetooth.
Pairing a Wireless Headset
Before you can receive navigation prompts through your
headset, you must pair your device with a compatible mobile
headset.
1Place your headset and your Bluetooth device within 33 ft.
(10 m) of each other.
2On your device, enable wireless technology.
3Select an option:
• Select Add Headset.
• If you have already paired a different headset, select
Settings > Bluetooth > Add Headset.
4On your headset, enable Bluetooth wireless technology.
5On your device, select OK.
A list of nearby Bluetooth devices appears.
6Select your headset from the list, and select OK.
7If necessary, confirm that the device is allowed to connect.
8If necessary, enter the device Bluetooth PIN (0000) into your
headset.
Your device will send navigation prompts to your headset while
you navigate a route.
Deleting a Paired Headset
You can delete a paired headset to prevent it from automatically
connecting to your device in the future.
1Select Settings > Bluetooth > Headset.
2Select .
3Select the headset, and select Delete.
Disconnecting Your Headset
1Select Settings > Bluetooth.
2Select Headset > None > Save.
3Select Yes.
Your headset is disconnected from your device but remains
paired with your device.
Tips After Pairing the Devices
• After the initial pairing, the two devices can connect
automatically each time you turn them on.
• When your headset is connected to your device, you are
ready to receive voice prompts.
• When you turn on the device, it tries to connect to the last
headset to which it was connected.
• You might need to set your headset to connect to the device
automatically when the device is turned on.
Using the Apps
Using Help
Select Apps > Help to view information about using the
device.
Hands-Free Voice Prompts 9

Searching Help Topics
Select Apps > Help > .
Planning a Trip
You can use the trip planner to create and save a trip with
multiple destinations.
1Select Apps > Trip Planner.
2Select New Trip.
3Select Select Start Location.
4Search for a location (page 4).
5Select Select.
6To add additional locations, select .
7Select Next.
8Enter a name, and select Done.
Scheduling a Trip
You can use the trip planner to create and save a trip with
multiple destinations.
1Select Apps > Trip Planner.
2Select a trip.
3Select a location.
4Select Departure Time (or Arrival Time if the location is not
the first stop in the trip).
5Select a date and time, and select Save.
6Select Duration.
7Select the amount of time you will spend at the location, and
select Save.
8If necessary, repeat steps 3–7 for each location.
Changing Transportation Modes in a Trip
You can change the transportation modes used to travel in a
saved trip.
1Select Apps > Trip Planner.
2Select a trip.
3Select > Transportation Mode.
4Select a transportation mode.
5Select Save.
Navigating to a Saved Trip
1Select Apps > Trip Planner.
2Select a saved trip.
3Select Go!.
4If prompted, select a route (page 7).
Editing a Saved Trip
1Select Apps > Trip Planner.
2Select a saved trip.
3Select .
4Select an option:
• Select Rename Trip.
• Select Edit Destinations to add and delete location, or to
change the order of locations.
• Select Delete Trip.
• Select Optimize Order to arrange the stops on your trip
in the most-efficient order.
TracBack®
Following Your Recent Track
The TracBack feature records a track of your recent movement.
You can retrace your recent track back to where you started.
1Select Apps > TracBack.
Your recent track appears on the map.
2Select Go!.
Saving Your Recent Track as a Trip
You can save your recent track as a trip, which you can
navigate later using the trip planner (page 10).
1Select Apps > TracBack.
Your recent track appears on the map.
2Select > Save as Trip.
3Enter a name, and select Done.
Using the Compass
You can navigate using a GPS compass.
Select Apps > Compass.
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature (page 14).
You can view your previous routes and places you have
stopped on the map.
Select Apps > Where I've Been.
Logging Service History
You can log the date and odometer reading when service or
maintenance is performed on your vehicle. The device provides
several service categories, and you can add custom categories
(page 10).
1Select Apps > Service History.
2Select a service category.
3Select Add Record.
4Enter the odometer reading, and select Next.
5Enter a comment (optional).
6Select Done.
Adding Service Categories
1Select Apps > Service History.
2Select > Add Category.
3Enter a category name, and select Done.
Deleting Service Categories
When you delete a service category, all service records in the
category are also deleted.
1Select Apps > Service History.
2Select > Delete Categories.
3Select the service categories to be deleted.
4Select Delete.
Renaming Service Categories
1Select Apps > Service History.
2Select the category to be renamed.
3Select Rename Category.
4Enter a name, and select Done.
Deleting Service Records
1Select Apps > Service History.
2Select a service category.
3Select > Delete Records.
4Select the service records to be deleted.
5Select Delete.
10 Using the Apps

Editing a Service Record
You can edit the comment, odometer reading, and date of a
service record.
1Select Apps > Service History.
2Select a category.
3Select a field.
4Enter the new information, and select Done.
Using the World Clock
1Select Apps > World Clock.
2If necessary, select a city, enter a city name, and select
Done.
Viewing the World Map
Select Apps > World Clock > .
Nighttime hours appear in the shaded area of the map.
Setting an Alarm
1Select Apps > Alarm Clock.
2Set a time.
3Select the Alarm On check box.
Using the Calculator
Select Apps > Calculator.
Converting Units
1Select Apps > Unit Converter.
2If necessary, select the button next to Convert, select a
measurement category, and select Save.
3If necessary, select a unit button, select a unit of
measurement, and select Save.
4Select the field below the unit you want to convert.
5Enter the number, and select Done.
Setting Currency Conversion Rates
This feature is not available in all areas.
You can update the currency conversion rates for the unit
converter.
1Select Apps > Unit Converter.
2Select the button next to Convert.
3Select Currency, and select Save.
4If necessary, select a currency button, select a different
currency, and select Save.
5Select the button at the bottom of the screen that displays
the currency conversion rates.
6Select the box next to a currency.
7Enter a value, and select Done.
8Select OK.
About Offers
If your device package includes a traffic receiver, you will
receive location-relevant offers and coupons. Ad-based traffic
information is available only in North America.
NOTE: The traffic receiver must be connected to external power
and you must be in a coverage area to receive ad-based traffic
information.
See our privacy statement at www.garmin.com/privacy.
Viewing Offers
CAUTION
Do not attempt to write down the coupon codes while driving.
This feature is available only if you are using an ad-supported
lifetime traffic receiver.
1Select an offer that appears on the screen to search for the
nearest location related to that offer.
2If available, select to view coupon information.
3Write down this code and present it when you arrive at the
location.
Viewing an Offer List
This feature is available if you are using an ad-supported
lifetime traffic receiver.
Select Apps > Offers.
Disabling Traffic and Offers
1Select Traffic > Traffic.
2Clear the Traffic check box.
The device no longer receives live traffic data, but
automobile routes still avoid potentially congested areas
using trafficTrends™, if enabled. See page 14.
Using the Language Guide
Use the Language Guide to look up and translate words or
phrases.
Select Apps > Language Guide.
Purchasing the Language Guide
Your device comes with a limited demonstration version of the
language guide.
To purchase the full language guide, go to
http://www.garmin.com/languageguide.
Selecting Languages in the Language Guide
You can select the languages you want to translate when
translating words and phrases.
1Select Apps > Language Guide.
2Select > Language.
3Select From, select the language to translate from, and
select Save.
4Select To, select the language to translate to, and select
Save.
Translating Words and Phrases
1Select Apps > Language Guide.
2Select a category and subcategories.
3If necessary, select , enter a keyword, and select Done.
4Select a word or a phrase.
5Select to listen to the translation.
Using a Bilingual Dictionary
1Select Apps > Language Guide > Bilingual Dictionaries.
2Select a dictionary.
3If necessary, select , enter a word, and select Done.
4Select a word.
5Select to listen to the translation.
About Traffic
NOTICE
Garmin is not responsible for the accuracy or timeliness of the
traffic information.
Traffic information may not be available in all areas or countries.
For information about traffic receivers and coverage areas, go
to http://www.garmin.com/traffic.
About Traffic 11

A traffic receiver is included in some packages, built into either
the vehicle power cable or the device, and is an optional
accessory for all models.
• The device must be connected to vehicle power to receive
traffic information.
• The powered traffic receiver and the device must be in data
range of a station transmitting traffic data to receive traffic
information.
• You do not need to activate the subscription included with
your traffic receiver.
• The traffic icon ( ) changes color to indicate the severity of
traffic conditions on your route or on the road you are
currently traveling.
Receiving Traffic Data
NOTICE
Heated (metallized) windshields could degrade the performance
of the traffic receiver.
Before you can receive traffic data, you must purchase a
compatible Garmin traffic receiver accessory. Go to
www.garmin.com for more information.
When the receiver is within a traffic coverage area, your device
will begin displaying traffic information.
The traffic receiver and the device may need to be in data range
of an FM station transmitting traffic information.
1Connect the traffic receiver to an external power source.
2Connect the traffic receiver to the device.
Traffic Receiver
ÀMini-USB connector
ÁExternal antenna connector
ÂInternal antenna
ÃPower LED
ÄVehicle power adapter
About the Traffic Icon
When you are receiving traffic information, a traffic icon appears
on the map. The traffic icon changes color to indicate the
severity of traffic conditions.
Gray: Traffic information is not available.
Green: Traffic is flowing freely.
Red: Traffic is not moving or moving very slowly. There is a
severe delay.
Yellow: Traffic is moving, but there is a delay. There is
moderate traffic congestion.
Traffic on Your Route
When calculating your route, the device examines the current
traffic and automatically optimizes the route for the shortest
time. If a severe traffic delay occurs on your route while you are
navigating, your device automatically recalculates the route.
The traffic icon changes color to indicate the severity of
traffic conditions on your route or on the road you are currently
traveling.
Your device may route you through a traffic delay if a better
alternative route does not exist. The delay time is added into
your estimated time of arrival automatically.
Viewing Traffic on Your Route
1While navigating a route, select .
2Select Traffic on Route.
A list of traffic events appears, organized by their location on
the route.
3Select an event.
Manually Avoiding Traffic on Your Route
1From the map, select .
2Select Traffic on Route.
3If necessary, use the arrows to view other traffic delays on
your route.
4Select > Avoid.
Taking an Alternate Route
1While navigating an automobile route, select .
2Select Alternate Route.
3Select a route.
Viewing Traffic on the Map
The traffic map shows color-coded traffic flow and delays on
nearby roads.
1From the map, select .
2Select Traffic Conditions.
Traffic in Your Area
Searching for Traffic Delays
1From the map page, select .
2Select Traffic Conditions > .
3Select an item in the list.
4If there is more than one delay, use the arrows to view
additional delays.
Viewing a Traffic Incident on the Map
1From the map, select .
2Select Traffic Conditions.
3Select a traffic icon.
Understanding Traffic Data
The traffic legend explains the icons and colors used on the
traffic map.
1From the map, select > Traffic.
2Select Traffic Legend.
Traffic Subscriptions
Subscription Activation
You do not need to activate the subscription included with your
FM traffic receiver. The subscription activates automatically
after your device acquires satellite signals while receiving traffic
signals from the pay service provider.
Adding a Subscription
You can purchase traffic subscriptions for other regions or
countries.
1From the main menu, select Traffic.
2Select Subscriptions > .
3Write down the FM traffic receiver unit ID.
4Go to www.garmin.com/fmtraffic to purchase a subscription
and get a 25-character code.
12 About Traffic

The traffic subscription code cannot be reused. You must
obtain a new code each time you renew your service. If you
own multiple FM traffic receivers, you must obtain a new
code for each receiver.
5Select Next on the device.
6Enter the code.
7Select Done.
Disabling Traffic
1Select Settings > Traffic.
2Clear the Traffic check box.
The device no longer receives live traffic data, but will still avoid
potentially congested areas using trafficTrends, if enabled
(page 14).
Data Management
About Data Management
You can store files, such as JPEG image files, on your device.
The device has a memory card slot for additional data storage.
NOTE: The device is not compatible with Windows® 95, 98,
Me, Windows NT®, and Mac® OS 10.3 and earlier.
File Types
The device supports these file types.
• Maps and GPX waypoint files from myGarmin™ mapping
software, includingMapSource®, BaseCamp™, and
HomePort™ (page 16).
• GPI custom POI files from Garmin POI Loader (page 16).
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
(http://www.garmin.com/trip_planning). In addition to map and
data storage, the memory card can be used to store files such
as maps, images, geocaches, routes, waypoints, and custom
POIs.
Installing a Memory Card
The device supports microSD™ and microSDHC memory cards.
1Insert a memory card into the slot on the device.
2Press it in until it clicks.
Connecting the Device to Your Computer
You can connect the device to your computer using the USB
cable included with your device.
NOTE: The first time you connect your device to your Windows
computer, you will be prompted to install the myGarmin Agent
software. Go to http://www.garmin.com/agent for more
information.
1Plug the small end of the USB cable into the port on the
device.
2Plug the larger end of the USB cable into an available USB
port on your computer.
A picture of your device connected to a computer appears on
the device screen.
On a Windows computer, your device appears in My Computer
as either a portable device or as two removable drives
representing the device and the memory card.
Transferring Data From Your Computer
1Connect the device to your computer (page 13).
Your device and memory card appear as removable drives in
My Computer in Windows and as mounted volumes on Mac
computers.
NOTE: Some computers with multiple network drives cannot
display device drives. See your operating system Help file to
learn how to map the drive.
2On your computer, open the file browser.
3Select the file.
4Select Edit > Copy.
5Open the Garmin or memory card drive or volume.
6Select Edit > Paste.
The file appears in the list of files in the device memory or on
the memory card.
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not
necessary to safely disconnect.
1Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the Trash.
2Disconnect the cable from your computer.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1Open the Garmin drive or volume.
2If necessary, open a folder or volume.
3Select a file.
4Press the Delete key on your keyboard.
Customizing the Device
Map and Vehicle Settings
Select Settings > Map & Vehicle.
Vehicle: Changes the icon to represent your position on the
map. Go to http://www.garmingarage.com for more icons.
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may
cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Buttons: Sets which icons are included on the map. Up to
two icons can be included on the map.
Map Layers: Sets the data that appears on the map page
(page 8).
Dashboards: Sets the map dashboard layout.
myMaps: Sets which installed maps the device uses.
Enabling Maps
You can enable map products that are installed on your device.
TIP: To purchase additional map products, go to
http://www.garmin.com/us/maps.
1Select Settings > Map & Vehicle > myMaps.
2Select a map.
Data Management 13

Navigation Settings
Select Settings > Navigation.
Calculation Mode: Sets route preference.
Off-Route Recalculation: Sets how your device recalculates a
route if you deviate from the route.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or
areas.
Advanced Detours: Sets the length of the detour.
Safe Mode: Disables all functions that require significant
operator attention and could become a distraction while
driving.
GPS Simulator: Stops the device from receiving a GPS signal,
and saves battery power.
Route Preferences
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time: Calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance: Calculates routes that are shorter in distance
but can take more time to drive.
Less Fuel: Calculates routes that could use less fuel than other
routes.
Off Road: Calculates a direct line from your location to your
destination.
Display Settings
Select Settings > Display.
Color Mode: Changes the brightness of the screen. Decreasing
the brightness can save battery power.
Display Timeout: Sets the amount of idle time before your
device enters sleep mode.
Screenshot: Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the
device storage.
Bluetooth Settings
Select Settings > Bluetooth.
Bluetooth: Enables Bluetooth wireless technology.
Add Headset: Manages connection between your device and
wireless headsets with Bluetooth wireless technology.
Friendly Name: Allows you to enter a friendly name that
identifies your devices with Bluetooth wireless technology.
Disabling Bluetooth
1Select Settings > Bluetooth.
2Select Bluetooth.
Traffic Settings
Select Settings > Traffic.
Traffic: Enables traffic.
Subscriptions: Lists current traffic subscriptions.
trafficTrends: See page 14.
About Traffic Subscriptions
You can purchase additional subscriptions or a renewal if your
subscription expires. Go to http://www.garmin.com/traffic.
Viewing Traffic Subscriptions
Select Settings > Traffic > Subscriptions.
trafficTrends
When the trafficTrends feature is enabled, your device records
historic traffic data and uses that data to calculate more-efficient
routes.
When you drive with the trafficTrends feature enabled, your
device records traffic data that is used to improve the
trafficTrends historical traffic information. This information is
sent to Garmin when you connect your device to myGarmin
using your computer.
NOTE: Different routes may be calculated based on traffic
trends for the day of the week or the time of day.
Disabling trafficTrends
To prevent your device from recording or sharing traffic data,
you must disable trafficTrends.
Select Settings > Traffic > trafficTrends.
Units and Time Settings
Select Settings > Units & Time.
Current Time: Sets the device time.
Time Format: Allows you to select a 12-hour, 24-hour, or UTC
display time.
Units: Sets the unit of measure used for distances.
Language and Keyboard Settings
Select Settings > Language & Keyboard.
Voice Language: Sets the language for voice prompts.
Text Language: Sets all on-screen text to the selected
language.
NOTE: Changing the text language does not change the
language of user-entered data or map data, such as street
names.
Keyboard Language: Sets the language for your keyboard.
Keyboard Layout: Sets the keyboard layout.
Mode-Adaptive Keyboard: Changes keyboard layout when
you change transportation modes.
Device and Privacy Settings
Select Settings > Device.
About: Displays the software version number, the unit ID
number, and information on several other software features.
EULAs: Displays the end-user license agreements that apply to
your choice.
NOTE: You need this information when you update the
system software or purchase additional map data
(page 16).
Travel History: Allows the device to record information for the
myTrends (page 7), Where I’ve Been (page 10) and Trip Log
(page 8) features.
Clear Travel History
Proximity Alerts Settings
Select Settings > Proximity Alerts.
Audio: Sets the style of alert that plays when you approach
proximity points.
Alerts: Sets the type of proximity points for which alerts are
played.
Restoring Settings
You can restore a category of settings or all settings to the
factory default values.
1Select Settings.
2If necessary, select a settings category.
14 Customizing the Device

3Select > Restore.
Appendix
Power Cables
Your device can be powered four ways.
• Motorcycle power cable
• Vehicle power cable
• USB cable
• AC adapter (optional accessory)
Charging the Device
You can charge the battery in the device using any of these
methods:
• Connect the device to the vehicle power cable.
• Connect the device to the motorcycle power cable.
• Connect the device to a computer using the included USB
cable.
• Connect the device to an optional power adapter accessory,
such as a wall power adapter.
About Device Care
NOTICE
Avoid dropping your device.
NOTICE
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
NOTICE
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Cleaning the Outer Casing
1Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2Wipe the device dry.
Cleaning the Touchscreen
1Use a soft, clean, lint-free cloth.
2If necessary, use water, isopropyl alcohol, or eyeglass lens
cleaner.
3Apply the liquid to the cloth.
4Gently wipe the screen with the cloth.
Avoiding Theft
• Remove the device and mount from sight when not in use.
• Remove the residue left on the windshield by the suction
cup.
• Do not keep your unit in the glove compartment.
• Register your device at http://my.garmin.com.
Extending the Battery Life
• Keep your device away from extreme temperatures.
• Put the device in sleep mode (page 3).
• Decrease the screen brightness (page 14).
• Do not leave your device in direct sunlight.
• Decrease the volume (page 3).
• Disable Bluetooth (page 14).
• Shorten the display timeout time (page 14).
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1Unscrew the end piece À.
TIP: You may need to use a coin to remove the end piece.
2Remove the end piece, the silver tip Á, and the fuse Â.
3Install a 2 A fast-blow fuse.
4Place the silver tip in the end piece.
5Screw the end piece back into the vehicle power cable Ã.
Mounting on Your Dashboard
NOTICE
The permanent mounting adhesive is extremely difficult to
remove after it is installed.
Use the mounting disk to mount your device to the dashboard
and comply with certain state regulations. See www.garmin.com
for more information.
1Clean and dry the dashboard where you are placing the disk.
2Remove the backing from the adhesive on the bottom of the
disk.
3Place the disk on the dashboard.
4Remove the clear plastic cover from the top of the disk.
5Place the suction cup mount on top of the disk.
6Flip the lever down (toward the disk).
Removing the Device, Cradle, and Mount
Removing the Device from the Cradle
1Press the tab on the top of the cradle.
2Tilt the device forward.
Removing the Cradle from the Mount
1Turn the cradle to the right or left.
2Apply pressure until the socket on the cradle releases the
ball on the mount.
Removing the Suction Cup Mount from the
Windshield
1Flip the lever on the suction cup mount toward you.
2Pull the tab on the suction cup toward you.
Updating Maps
1Open myDashboard (page 3).
2Register the device (page 3).
3Select an option.
• Under Map Updates, click Update Now.
• If a free map update is no longer available, click Buy
Now.
4Follow the on-screen instructions.
Appendix 15

About nüMaps Lifetime
Models with "LM" after the model number include subscriptions
to nüMaps Lifetime, which provides quarterly map updates for
the life of your device. For terms and conditions, go to
http://www.garmin.com/numapslifetime.
NOTE: If your device does not include a subscription to nüMaps
Lifetime, you can purchase one at http://www.garmin.com
/numapslifetime.
Purchasing Additional Maps
1Go to your device product page on the Garmin web site
(http://www.garmin.com).
2Click the Maps tab.
3Follow the on-screen instructions.
Safety Cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a custom point of interest or a safety
camera database.
Safety camera information is available in some locations. Check
http://my.garmin.com for availability. For these locations, you
can purchase a subscription for safety camera information. The
subscription includes the locations of hundreds of safety
cameras. Your device alerts you when you are approaching a
safety camera and can warn you if you are driving too fast. The
data is updated at least weekly, so you can update your device
regularly to receive the most up-to-date information.
You can purchase a new region or extend an existing
subscription at any time. Each region that you purchase has an
expiration date.
Custom Points of Interest
Custom POIs are customized points on the map. They can
contain alerts that let you know if you are near a designated
point or if you are traveling faster than a specified speed.
Installing POI Loader Software
You can create or download custom POI lists on your computer
and install them on your device using POI Loader software.
1Go to http://www.garmin.com/extras.
2Click Services > POI Loader.
3Install the POI Loader onto your computer.
Using the POI Loader Help Files
For more information on the POI loader, refer to the Help file.
With the POI loader open, click Help.
Finding Extras
1Select Where To? > Categories > Custom POIs.
2Select a category.
Purchasing Accessories
Go to http://buy.garmin.com.
Troubleshooting
Problem Solution
My device is not
acquiring satellite
signals.
• Verify the GPS simulator is turned off
(page 14).
• Take your device out of parking garages and
away from tall buildings and trees.
• Remain stationary for several minutes.
Problem Solution
The suction cup will
not stay on my
windshield.
1Clean the suction cup and windshield with
rubbing alcohol.
2Dry with a clean, dry cloth.
3Mount the suction cup (page 2).
The device does not
charge in my vehicle.
• Check the fuse in the vehicle power cable
(page 15).
• Verify the vehicle is turned on and is
supplying power to the power outlet.
• Your device can only charge between 32°F
and 113°F (between 0°C and 45°C).
My battery does not
stay charged for very
long.
To maximize the time between charges, turn
down the backlight (page 14).
My battery gauge
does not seem
accurate.
Allow the unit to fully discharge, and fully
charge it (without interrupting the charge cycle).
How do I know my
device is in USB
mass storage mode?
When your device is in USB mass storage
mode, a picture of a device connected to a
computer is shown on the device screen.
The device is
connected to the
computer, but it will
not go into mass
storage mode.
1Disconnect the USB cable from your
computer.
2Turn off the device.
3Plug the USB cable into a USB port on your
computer and into your device.
The device automatically turns on and goes
into USB mass storage mode.
4Verify your device is connected to a USB port
and not a USB hub.
I cannot see any new
removable drives in
my list of drives.
If you have several network drives mapped on
your computer, Windows can have trouble
assigning drive letters to your device drives.
Refer to your operating system Help file to learn
how to map or assign drive letters.
My phone will not
connect to the
device.
• From the main menu, select Settings >
Bluetooth. The Bluetooth field must be set to
Enabled.
• Turn on your phone and bring it within 33 feet
(10 m) of the device.
• Go to http://www.garmin.com/bluetooth for
more help.
16 Appendix