Gasmate BQ1060 User manual

1

3
2
READ ME FIRST

3
2
GENERAL INFORMATION

5
4

5
4
Location of your Barbecue
DO NOT use your barbecue in garages, porches, sheds,
breezeways, or other enclosed areas. Your barbecue is to
be used OUTDOORS. The barbecue is not intended to be
installed in or on recreational vehicles and/or boats and
should not be placed under any surface that will burn. Do
not obstruct the ow of combustion and ventilation air
around the barbecue housing.
Protect Children
Keep children away from barbecue during use and until
barbecue has cooled after you have nished. Do not
allow children to operate barbecue.
Always ensure that no sporting or physical activities are
carried out in close proximity to the barbecue during use
and while still hot.
Tools You Will Need
Adjustable spanner, Phillips head screwdriver.
Check Barbecue for any Damage
Inspect barbecue parts as you proceed. Contact your
supplier for assistance regarding replacement of any
damaged or missing parts. Do not assemble or operate a
barbecue that appears damaged. Barbecues for use with
gas cylinders are labelled ‘Propane Gas’ or ‘Universal
L.P.G’. Check labelling at the gas connection on your
barbecue.
Nominal Hourly Gas Consumption
Main Burner
Gas Type U.L.P.G
Inj. Size 0.90 mm
Gas Cons. 11 MJ/h
Gas Pressure 2.75 kPa

7
6
AA : 8PCS
Ø6 x Ø13 x 1.0
BB : 5PCS
Ø6 x Ø9 x 1.0
CC : 2PCS
M6
DD : 6PCS
M6 x 10
EE : 4PCS
M6 x 35
FF: 1PC
Temperature
Gauge Nut
GG : 2PCS
Lid Pin
HH : 2PCS
Lid Clip
II : 4PCS
Part Description QTY
A Lid 1
B Temperature Gauge 1
C Lid Handle 2
D Cooking Grate 1
E Hot Plate 1
F Burner 1
G Bowl 1
Part Description QTY
H Heat Insulator 4
I Support Leg Left 1
J Support Leg Right 1
K Fat Cup 1
L Fat Cup Support 1
M Side Shelf 2
N Stepped Washer 4

7
6
A
B
C
AA x 2
BB x 2
CC x 2
FF x 1

9
8

9
8

11
10

11
10

13
12
CONNECTING & DISCONNECTING
TO GAS SOURCE
Familiarise yourself with the general information and
safety guidelines located at the front of this manual.
Check
1. Gas cylinder is lled. A sloshing sound will be heard
when shaken.
2. The burner control is in the ‘OFF’ position
Connecting
1. Ensure valve is in OFF position.
2. Check for any damage to the cylinder connection.
3. Attach the regulator to the cylinder valve.
4. Use a soapy water solution to check the joint. If
bubbles appear the connection will need to be re-
tightened.
Overall Barbecue Dimensions
Length Width Height
940mm 450mm 400mm

13
12
BURNER OPERATION & IGNITION SYSTEM CHECK
Problem Possible Reason Solution
Burner will not ignite
Control knob is closed Turn knob to high when lighting
Piezo igniter is faulty Use a long barbecue match inserted through
the hole on under side of barbecue
Piezo igniter electrode not aligned Ensure the electrode tip is 3-4mm away from
the burner tube
Food is not cooking
or is taking too long
Burner has gone out Check that the gas bottle is not empty and
re-ignite the burner
Cooking surface was not given
enough time to warm up before the
food was applied
Remove the food and give the burner time to
warm the cooking surface (5-10 mins)
There is too much food on the
cooking surface
Cook smaller portions

15
14
IMPORTANT
• Beware of spiders and wasps. Burner tube
should be inspected and cleaned periodically.
• This appliance must only be serviced by an
authorised person.
• To avoid any are-ups, it is recommended that
the drip tray be checked and emptied regularly.
Contents of the drip tray may be very hot during
cooking. If emptied during extended cooking
extreme caution should be taken and direct
contact by hand should be avoided at all times.
Allow to cool completely before disposing of the
contents.

15
14

16
16
For any queries or assistance call
Customer Service
(New Zealand)
0800 161 161
Hours of operation:
Monday to Friday 8am - 5pm
Keep your purchase receipt, this will be required to
make any claims under the 12 month warranty.