Gasmate GM009-024 User manual
1
Select from 3 modes of operation:
1. 12V DC Vehicle Accessory Socket
2. 220-240V AC Mains Power
3. Universal LPG
Thermostat controlled when operating on 220-
240V power
Indicators to show the method of operation
Silent operation with absorption cooling system
Complete with hose and regulator
Approved to New Zealand Standards
Important: Retain these instructions for future use.
5299-05/21
Gasmate® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber Living - Hamilton, N.Z. www.gasmate.co.nz
3-WAY
UPRIGHT FRIDGE
Model No. GM009-024
32
To reduce the risks of personal injury or damage to
property, follow basic safety precautions when using this
fridge, including the following:
DO NOT operate any product which has been/ or
appears damaged in any manner or after the product
malfunctions, or is dropped. Return the complete
product immediately to your retailer for inspection, and if
necessary, adjustment or repair.
This device may only be repaired by qualied personnel.
Improper repairs can lead to considerable hazards.
DO NOT attempt to stand on top of the fridge. Doing so
may result in bodily injury or damage to the fridge.
DO NOT operate the appliance on more than one source
of energy at the same time.
DO NOT touch cold surfaces of the chiller panel
when hands are damp or wet. Skin may stick to these
extremely cold surfaces.
The appliance is not intended for use by young children.
Young children should be supervised to ensure that they
do not play with the appliance.
DO NOT use mechanical devices or other means to
accelerate the defrosting process.
DO NOT damage the refrigerant circuit.
DO NOT use electrical appliances inside the storage
compartment.
DO NOT operate or place any part of this product on or
near any hot surfaces such as a gas ame, or electric
element.
DO NOT use the product for other than its intended use
as described in these instructions. The use of accessory
attachments other than those recommended by the
IMPORTANT
Read these instruction carefully prior to use.
Familiarise yourself with the appliance before
connecting it to it’s gas container. Keep these
instructions for future reference.
If you smell gas
1. Shut off gas to the fridge at its source, if
possible.
2. If odour continues immediately call your
gas supplier or re department.
manufacturer may cause safety hazards.
When positioning the device ensure the supply cord is
not trapped or damaged.
All refrigeration products contain refrigerants (ammable
cyclopentane), which by law must be removed from the
product and recovered for proper disposal by qualied
technicians prior to product disposal. If you are disposing
of an old refrigeration product, check with the company
handling the disposal about what to do.
Keep ventilation openings in/on the device enclosure or
in the in-built structure clear of obstruction.
DO NOT use mechanical devices or other means
to accelerate defrosting process other than those
recommended by the manufacturer.
DO NOT use electrical appliances inside the food storage
compartments of the device, unless those of the type
recommended by the manufacturer.
DO NOT locate multiple portable socket outlets or
portable power supplies at the rear of the appliance.
No customer serviceable parts inside. Return to supplier
for repairs
Disconnect the device from power supply:
• Before each cleaning and maintenance
• After every use
Connect the device as follows:
• With DC cable to a DC plug socket in a vehicle
• Or with AC power supply connection cable to AC
mains supply.
Never pull the plug out of a socket by the cable.
If the fridge is connected to a DC socket: Disconnect
the device and other power consuming devices from the
battery before connecting a quick charging device.
If the device is connected to a DC socket: Disconnect
the device or switch it off when you turn off the engine.
Otherwise you may discharge the battery.
The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
Before starting the device, ensure that power supply line
and plug are in dry condition.
Do not use electrical devices inside the device unless
recommended by the manufacturer for the purpose.
Do not place the device near open ames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
Danger of overheating!
• Ensure at all times that there is sufcient ventilation
so that heat that arises during operation does not
build up.
• Make sure that the device is sufciently far away
from walls and other objects so that air can
circulate.
• Ensure that ventilation openings are not covered.
• Do not ll the inner compartment with ice or uid.
Never immerse the device in water.
This product is not a household
appliance and its design & manufacture
was intended for use with a frequency
corresponding to that of a leisure activity,
and is not a substitute for a domestic
product with similar function.
32
FOR YOUR SAFETY
Failure to comply with these instructions could result
in a re or explosion which could cause serious
bodily injury, death or property damage.
Turn off gas supply at the gas cylinder after use.
Parts sealed by the manufacturer or their agent must
not be manipulated by the user. This Fridge is only to
be used outdoors if running on LPG.
• Do not test for gas leaks with an open ame.
• If this information is not followed exactly a re
causing death or serious injury may occur.
• If there is a leak on your appliance (smell of gas)
immediately attempt to turn off the cylinder valve.
Remove the appliance to a well ventilated location
away from any ignition source. Only check for
leaks outdoors using soapy water. DO NOT try to
detect leaks using a ame.
• Check for leaks by brushing a soap and water
solution over all connections. If you are unable to
correct the leak by tightening the connections,
turn off the gas and contact customer service
immediately.
• Only use the hose assembly as supplied with this
appliance for connection to the cylinder -
DO NOT USE ADAPTORS.
• After use turn the gas cylinder valve off.
• Avoid twisting or kinking the hose.
• Do not store or use petrol or other ammable
liquids in the vicinity of this or any other appliance.
• Do not store empty or full spare gas cylinders
under or near this or any other appliance.
• Never alter or modify the regulator or gas supply
assembly.
• This appliance must not be used indoors if using
LPG.
• Only use in well ventilated areas.
• CARBON MONOXIDE HAZARD - USING THIS
APPLIANCE IN AN ENCLOSED SPACE ON
LPG MAY CAUSE DEATH. DO NOT USE IN
CARAVANS, TENTS, MARINE CRAFT, CARS,
MOBILE HOMES OR SIMILAR LOCATIONS ON
LPG.
• This appliance shall only be used in an above
ground open-air situation with natural ventilation,
without stagnant areas, where gas leakage and
products of combustion are rapidly dispersed by
wind and natural convection.
• Ensure the appliance is set up on a level and
stable surface.
LPG WARNINGS
• Do not move the appliance while in use or when
hot.
IF THERE IS A LEAK
• Turn the cylinder off.
• Ventilate the area to disperse gas.
• Check all connections.
• If leak persists, keep the cylinder upright. Keep
skin away from any gas or liquid escaping from the
cylinder.
• Keep the cylinder at least 20 metres away from
any sparks or ignition sources, including electrical
equipment, camera ashes, engines and motors.
• Disperse gas by encouraging maximum ventilation
and spraying with a ne water spray.
IF THERE IS A FIRE
• If the re is at the appliance, turn the gas off at the
cylinder. Smother the ames with a wet cloth, re
blanket or extinguish using a re extinguisher.
• If the re is at the cylinder, or you can not get
to the valve to turn the gas off, contact the re
brigade immediately.
• Using a garden hose, direct the water to the
middle of the cylinder to keep it cool. Try not to
extinguish the ame. At least if the gas is burning,
it won’t be able to build up pressure and explode.
54
ELECTRICAL WARNINGS
Hose & Regulator Safety
The regulator and hose assembly supplied with the
barbecue are suitable for LPG only.
A gas regulator adjusted to have an outlet pressure of
2.75kPa is supplied for connection to the LPG cylinder.
The pressure regulator and hose assembly supplied
with the barbecue must be used. Replacement pressure
regulators and hose assemblies must be those specied
by the barbecue manufacturer.
When connecting the hose and regulator assembly to the
gas cylinder, take care to avoid unnecessary twisting of
the exible hose.
After the assembly has been secured, turn on the gas
and check for leaks by brushing a soap and water
solution over all connections.
If you are unable to correct the leak by tightening the
connections, turn off the gas and contact the supplier
immediately.
Always ensure the barbecue is kept away from ammable
materials and the gas cylinder clear of any heat source.
When changing over from an empty gas cylinder to a
full one make sure this procedure is carried out in a well
ventilated location, preferably outside, away from people
and away from any sources of ignition; such as naked
ames, pilot ames, electric heaters/equipment.
Gas Cylinder Use & Safety
This is a low pressure barbecue and must only be used
with the hose and regulator supplied.
The gas cylinder should be lled by a reputable gas
supplier and visually inspected and re qualied at each
lling.
Always keep cylinder in an upright position. Always close
the cylinder valve when the appliance is not in use.
Do not subject gas cylinder to excessive heat.
NEVER STORE YOUR GAS CYLINDER INDOORS.
Cylinders must be stored outdoors in a well ventilated
area out of reach of children, and must not be stored in a
building, garage or any other enclosed area.
To reduce the risk of electric shock,
DO NOT immerse or expose the product, exible
cord or plug to rain, moisture or any liquid or
use the product near baths, basins or other
vessels containing water or other liquids, or when
standing in or on damp or wet surfaces. If any
electrical product falls into water, UNPLUG it
immediately; DO NOT REACH INTO THE WATER.
Important: Prior to reconnecting to the power
supply, the product should be inspected by a
qualied technician.
DO NOT allow the cord to hang over the edge of
a bench top where it may be grabbed by children
or become entangled with a passer-by, resulting in
possible personal injury and/or property damage.
Always operate the fridge from a power source of
the same voltage, electrical rating (and frequency,
when operating on A.C. power) as indicated on
the fridge identication label.
This fridge must be operated from an Earthed
(Grounded) 3 pin A.C. power outlet when
operating on A.C. power.
When moving the fridge, be careful not to allow
the product to rest on the power cord.
DO NOT operate the fridge with a damaged
supply cord or plug.
Avoid the use of extension cords. If it is necessary
to use an extension cord, prior to its use, make
sure the extension cord is safe to use, capable of
handling the electrical load of the product (refer to
product identication label) and has been checked
and tested by your electrical supplier or a qualied
technician.
To avoid becoming entangled in the cord, NEVER
lay it through or along a walkway or thoroughfare.
Avoid the use of multi-outlet power boards for
powering this appliance. To avoid overloading
a power board and causing a possible hazard,
plug the cord of the appliance directly into a
permanently wired xed Earthed (Grounded)
Power outlet.
NEVER unplug an appliance by pulling on the
power cord. Always grip the plug rmly and pull
straight out from the power outlet.
54
OPERATION
The fridge is suitable for use at home (AC main supply),
or 12V AC supply socket of a vehicle, boat or caravan,
or by LPG. Before use please read carefully read the
instructions for connecting and shutting the appliance
down when you are going to power off.
NOTE
Before starting your new fridge for the rst time, you
should clean it inside and outside with a damp cloth.
NOTICE! Danger of overheating!
Ensure at all times that there is sufcient ventilation
so that heat that is generated during operation
can dissipate. Ensure that ventilation slots are not
covered. Make sure that device is sufciently far
away from walls and other objects so that air can
circulate.
Place the fridge on a stable & rm foundation.
Make sure that ventilation slots are not covered and
that heated air can dissipate.
NOTE
Opening the door for long periods can cause a signicant
increase of temperature in the cooling compartment of
the cooler.
Energy saving tips
Choose a well-ventilated location which is protected
against direct sunlight.
Allow warm food or beverages to cool down rst before
placing them in the fridge to keep them cool.
Do not open the fridge more often than necessary.
Defrost the fridge once a layer if ice forms.
NOMINAL HOURLY CONSUMPTION
OPERATING DIAGRAM
GAS IGNITION
MODE CONTROL GAS INDICATOR
THERMOSTAT
CONTROL
DC SOCKET
AC SOCKET
GAS CONNECTION
PILOT LIGHT
Mains 230V, 50Hz, 90W, 0.39A
Battery Power 12V, 95W, 7.9A
Universal LPG 12g/h
Temperature 0-3ºC in an ambient
temperature of 20-25ºC
Optimal Operating
Ambient Temperature 10ºC to 32ºC
Refrigerant NH375g Cyclopentane
Refrigeration Type Absorption System
Top Clearance 50cm from top
DO NOT COVER
Side Clearance 10cm for each side
Rear Clearance 10cm for rear
Table of contents
Other Gasmate Refrigerator manuals
