GBF MR560C4S User manual

Indoor Monitor Manual
(MR560C4S)
Note: In case of the system has more than one Indoor Monitor: the
connector J2 must be connected only in the farthest Indoor Monitor
(in relation to the Outdoor Station) and disconnected in the others;
and the connector J1 must be connected in the Indoor Monitor closest
to the Outdoor Station and disconnected in the others.

- Receiving a Call from the Outdoor Station:
1. When a visitor presses the “Bell” button on the outdoor station, your
indoor monitor(s) will turn on the screen with the outdoor station image
and will ring.
2. Press the ‘Talk’ button to answer the call and start a conversation
with the visitor.
3. Press the ‘Talk’ button to hang up.
- Monitoring the Outdoor Station(s):
1. At any time, press the ‘Monitor’ button to watch the image from the
outdoor station (once for the outdoor station 1 and twice for the
outdoor station 2).
2. Press the ‘Monitor’ button once more to turn off the screen.
- It is possible to start a conversation from the monitoring mode only
pressing the ‘Talk’ button, and pressing again to hang up.
- Unlocking the electronic lock:
During a conversation, monitoring mode or receiving a call, press the
‘Unlock’ button to activate the unlock contact relative to that outdoor
station.
- Transferring an Outdoor Station’s call:
1. During a conversation with the outdoor station, press the ‘transfer’
button to transfer the call.
2. The ControlCam2 App will ring, as well as the others monitors in the
system. All of them will be enabled to answer the call.

- Calling from the indoor monitor:
While in standby mode, press ‘Transfer’ button to call others indoor
monitor or call the ControlCam app (with no video).
- Managing images:
When the indoor monitor receives a call, it saves automatically a
screenshot. Follow the steps to access and delete these files.
1. While in standby mode, press ‘Talk’ button to access the storage of
images.
2. Scroll through the images using ‘Unlock’ and ‘Transfer’ buttons.
3. Delete an image pressing ‘Monitor’ button and pressing again to
confirm.
4. Exit this mode pressing the ‘Talk’ button.
If you have an SD card inserted in the indoor monitor, the screenshots
taken will be saved on the card.
- Recording videos:
During a call or monitoring mode, it is possible to record a video from
the outdoor station image, pressing the ‘Talk’ button for 3 seconds,
selecting ‘video’.
1. Press the ‘Talk’ button for 3 seconds to entry in the record mode.
2. Select ‘video’ pressing the ‘Talk’ button to scroll over the menu, then
press the ‘Unlock’ button to record. You can stop recording by
pressing ‘Talk’ or ‘Monitor’ buttons.
3. While in standby mode, press ‘Talk’ button for three seconds to
access the storage of videos.
4. Select ‘play’ pressing the ‘Talk’ button to scroll over the menu, then
press the ‘Unlock’ button to watch the video.
5. Exit this mode pressing the ‘Monitor’ button.

6. In case of using SD card, it is possible to remove that and watch the
videos using a computer with SD card slot and a player able to play
‘.AVI’ files.
If you have an SD card inserted (the system asks you to format when
you insert it), the indoor monitor will record a short video always you
receive a call from the outdoor station.
- Adjusting ringer and talk volumes:
At any time, use the volume scrolls to adjust the ringer and talk
volumes to the desired level.
- Adjusting indoor monitor’s screen settings:
1. During any mode, press ‘Talk’ button and hold for three seconds to
access the configuration menu.
2. Pressing the ‘Talk’ button, scroll over the ‘Brightness’, ‘Contrast’ and
‘Chroma’ options.
3. Use the ‘Transfer’ button to increase and the ‘Unlock’ button to
decrease the options levels.
4. Exit the menu pressing the ‘Monitor’ button.
- Adjusting date and time:
1. During any mode, press ‘Talk’ button and hold for three seconds to
access the configuration menu.
2. Pressing the ‘Talk’ button, scroll over the ‘Date’ and ‘Time’ options.
3. Press the ‘Unlock’ button to access the option.
4. Use the ‘Talk’ button to change among ‘Year’, ‘Month’ and ‘Day’ or
‘Hours’, ‘Minutes’ and ‘Seconds’.
5. Use the ‘Transfer’ button to increase and the ‘Unlock’ button to
decrease the options.

6. Press the ‘Talk’ button until pass through all the options to go back
to the main menu.
7. Exit the menu pressing the ‘Monitor’ button.
- Clearing the indoor monitor’s storage:
1. During any mode, press ‘Talk’ button and hold for three seconds to
access the configuration menu.
2. Pressing the ‘Talk’ button, scroll over the menu until the ‘Delete All’
option.
3. Press the ‘Unlock’ button to access the option.
4. Use the ‘Unlock’ and ‘Transfer’ buttons to select between ‘Video’
and ‘Photo’ options.
5. Press the ‘Talk’ button to confirm and clear all the selected files.
6. At the end of the process, the configuration menu will be quitted
automatically.