GBH-MED A11GBH0098 User manual
1
AROMA DIFFUSER
USER GUIDE
A11GBH0098
READ THESE INSTRUCTIONS CAREFULLY BEFORE USING
YOUR AROMA DIFFUSER AND KEEP THEM FOR FUTURE
REFERENCE TO ENSURE SAFE, TROUBLE-FREE OPERATION.
2
INTRODUCTION
Thank you for choosing the GBH-MEDTM aroma diffuser!
Using an aroma diffuser can make your home healthier and safer for the entire family.
Dry indoor air can lead to drying of the skin and of nasal, sinus, and lung tissues,
increasing the chances of skin rashes and itching, and of catching colds, flu, and other
illnesses. Proper aroma diffuser use can alleviate many of these problems.
SAFETY PRECAUTIONS
1. Never plug in the power cord with wet hands.
2. Don’t touch the transducer with your hands or with hard objects.
3. Don’t disassemble without unplugging the power cord.
4. Place the aroma diffuser on a level surface.
5. Use white vinegar for water tank cleaning.
6. Avoid letting water enter the aroma diffuser body while you’re cleaning it.
7. Never put chemicals, detergents, or essential oils into the water tank. Use clean
water only.
8. When the aroma diffuser will not be used for a long time, turn off the power and
unplug it, then empty it of all water. (See END-OF-SEASON MAINTENANCE
below in this user guide.)
9. Always turn off the power and unplug the aroma diffuser before emptying the water
in the tank.
10. Always unplug the aroma diffuser when filling or cleaning it.
SPECIFICATIONS
UPC Code
850022699016
Product No.
A11GBH0098
Adaptor Input
AC 110V 50/60Hz
Adaptor Output
DC 24V 650mA
Power
9W
Ultrasonic Frequency
2.4 MHz
Water tank capacity
500mL Max
Size
Approx.
Ø
6. 5in *5in
Accessories
AC Adaptors, Measuring Cup
Mist volume control
Yes
Automatic waterless shutoff
Yes
3
PARTS AND CONTROLS
1. Mist diffuser outlet
2. Water tank cap
3. Aroma diffuser base
4. Light color options button
5. Timer indication
6. Mist high/low button
7. On / Timer control button
8. Drain Side
9. Water tank
10. Adaptor
11. Measuring Cup
12. Remote Controller
9
10
11
6
5
4
3
2
1
7
8
12
4
OPERATING INSTRUCTIONS
1. Place the aroma diffuser upside on a
waterproof surface
and remove the
water tank cap. Fig 1.
2. Connect the AC adaptor to the base of
DC jack of the aroma diffuser. Fig 2.
3. Please use the measure cup to supply
water from the top of the water tank.
Please take care, do
not pour water
outside the tank or over the max line.
Fig 3.
4. Drop essential oil into water tank. The
dosage is about 2-3 drops (about 0.1-
0.15ML) per 100mL water. Fig 4.
5. Put the water tank cap back to the
aroma diffuser base.
6. Plug in the aroma diffuser to a 110-
volt AC electrical outlet. Press Mist
button to turn on the aroma diffuser.
Fig 5. See detailed instructions below.
7. Remark: When Empty the water tank,
make sure to pull out the water from
the drain side. Fig6.
Detailed instructions
1. Turn on the aroma Diffuser by pressing On/Timer button (#7, above).
2. Adjust the timerby pressing the On/Timer control button (#7, above) repeatedly.
The relative time setting on the display (60/120/180/continuously on) will change
with each press of the button.
3. Adjust the mist output to the desired level by pressing the Mist control button (#6,
above) repeatedly.
4. To get different light colour by pressing the Light button repeatedly (#4, above).
5. When Empty the water tank, make sure to pull out the water from the drain side.
6. There is a built-in waterless shutoff. It will stop when the water level falls too low
for safe operation.
Instructions for Remote Controller
You will find the operation is super easy with the remote controller.
Press On/off to turn on or turn off the aroma diffuser.
Press intermittent/continuous button to get different type of mist. The timer indicator
lamp will flash when intermittent mist type chosen.
Press Timing Button you can easily set the time of operation you want.
Press Big/Small button you will get the high/low mist.
Press Light button repeatedly you will get different color option.
Fig4.
Fig2.
Fig3.
Fig1.
Fig6.
Fig5.
5
MAINTENANCE AND CLEANING
If you will not use your aroma diffuser for more than a few days, empty out all
water from the water tank. Do not leave standing water in your unused aroma diffuser,
as this can allow the growth of bacteria, mold, or fungus, and the formation of mineral
deposits from hard water. It is important to clean your aroma diffuser regularly.
Always unplug your aroma diffuser before cleaning or maintenance.
DAILY MAINTENANCE
1. Empty the water tank.
2. Wipe the water tank dry with a paper towel.
3. Refill the water tank with clean water.
WEEKLY MAINTENANCE
1. Empty the water tank.
2. Fill the water tank two-thirds full with warm water, and add about 2 tablespoons
white vinegar to clean and disinfect. Shake to coat inside of tank and let sit for a
half hour.
3. Rinse with cool water and then empty the water tank.
4. Wipe water tank with soft cloth or paper towel. Do not allow the internal electrical
parts to get wet.
END-OF-SEASON MAINTENANCE
1. Empty all water from the water tank from drain side.
2. Use the water-and-white-vinegar mixture (described under WEEKLY
MAINTENANCE) to clean and disinfect the water tank.
3. Leave the cap off the water tank and let it dry until no water remains inside.
4. Store your aroma diffuser in a cool, dry place in its original packaging.
CUSTOMER SERVICE
If you have any question regard to the operation of this aroma diffuser, please contact
GVM-US Inc service team.
GVM-US Inc.
300 National Road Ste 200
Exton, PA 19341
215-613-0218 (Monday – Friday 9:00 AM – 5:00 PM EST)
service@gvm-us.com
website: www.gvm-us.com
Table of contents
Other GBH-MED Accessories manuals
