Important Information: When installing the Spacemaker microwave oven
over a range, allow minimum of 2" from bottom of Spacemaker microwave
oven to top of range backguard to allow for removal of light covers.
Installation Information: This information is not intended to be used for
installing unit described. Before installing, consult installation instructions
packed with product/kit for current dimensional data.
When replacing a 36" range hood, this
kit fills in the additional width to provide
a custom, built-in appearance. For
installation between cabinets only;
not for end-of-cabinet installation. Each
kit contains two, 3"-wide filler panels.
JX81A–Recirculating
Charcoal Filter Kit
To be used when the
microwave oven cannot
be vented to the outside.
Optional Accessories (Available at additional cost)
JX41/JX46BL–Black Filler Panel Kit
JX40WH/JX46WH–White Filler Panel Kit
Ventilation Options: The Spacemaker microwave oven is designed for adaptation for the following
three types of ventilation:
Outside Exhaust (Vertical)
Outside Exhaust (Horizontal)
Recirculating (Non-vented ductless–see Filter Kit Drawing)
For answers to your Monogram,
®GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
