GE Profile Advantium SCB2001KSS Manual

Note: Cabinets installed adjacent to wall ovens must have an
adhesion spec of at least a 194°F temperature rating.
Most 30" Wall Cabinets can be used with this unit.
Note: 2" minimum between cutouts when installed above
warming drawer or single wall oven.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Listed by
Underwriters
Laboratories
SCB2001K
GE Profile Advantium®Wall Oven
Advantium_Install_dim.eps
Cutout width
28-1/2"
30
Required
cutout location
36-3/4"
minimum
from floor
Junction
box
location
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16
21"
Cutout height
AB
19"
Cutout depth
29-25/32
21-7/8
15-27/32"
Excluding
Handle
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
AAllow 1" overlap of oven over top and bottom edges of cutout
BAllow 11/16"-3/4" for overlap of oven over side edges of cutout
240440
Specification Revised 2/07
Dimensions and Installation Information (in inches)

Listed by
Underwriters
Laboratories
For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
SCB2001K
GE Profile Advantium®Wall Oven
Single
Speedcook Installation
Speedcook Oven Installation
above a single GE Built-In Wall Oven
Speedcook Oven Installation
above a GE Warming Drawer
36-3/4 Min.
Required
30
19
Min
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
28-1/2
21
530Dia3
36-3/4 Min.
530Dia13
30
24
Min.
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2 Min.
Install
2 x 4 or 2 x 2
Runners or
Solid Bottom,
Must Support
100 lbs.
28-1/2
21
9-1/4
*45-1/
4
530Dia4
30
24
Min.
Construct Solid
Bottom Min. 3/8"
Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides
2 Min.
Per Oven
Requirement
28-1/2
21
240440
Specification Revised 2/07
Dimensions and Installation Information (in inches)
Order a 30” wide single oven cabinet or cut the
opening in a wall to dimensions shown.
Note: The rough opening must be:
• Depth – 19” Min.
• Width – 28-1/2” Min.
• Height – 21” Min.
• 36-3/4” from the floor to the cutout is required.
• These ovens require 3/4” overlap on each side,
top and bottom of the cutout.
• Oven overlaps will conceal cut edges on all sides
of the opening.
Note: For installation above a warming drawer
additional clearance between the two cutouts
may be required. Check to be sure the oven
supports above the Warming Drawer location
do not obstruct the required interior 23-1/2” depth
and 9-1/4” height.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.

Features and Benefits
• Speedcook Technology – Delivers oven-quality food up to eight times faster than
a conventional oven
• Multiple Cooking Modes – Bakes, broils, browns, roasts, microwaves and grills fast,
with no preheating
• Over 100 Pre-Programmed Menu Items, Manual Cook, Help and Demo Modes
• Sensor Cooking Controls – Automatically adjust the time and power for exceptional
cooking results
• Auto and Time Defrost – Automatically defrosts for a specified amount of time
• Halogen Interior Light – Helps you monitor food as it cooks
• Two-Line Bilingual Scrolling Display – Provides helpful cooking tips and oven-use
instructions in easy-to-read English or Spanish
• Stainless Steel Interior – Durable surface that cleans quickly with a simple wipe
of the towel
• Model SCB2001KSS – Stainless steel
SCB2001K
GE Profile Advantium®Wall Oven
240440
Specification Revised 2/07