GE PT7050SFSS Manual

Listed by
Underwriters
Laboratories
*ADA qualified based
on Uniform Federal
Accessibility Standards
For answers to your Monogram®or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center®service, 800.626.2000.
*
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Overall depth with handle 27-3/16"
E – Overall height with trim 28-3/8"
F – Overall width 29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Overall depth with handle 27-3/16"
E – Overall height with trim 28-3/8"
F – Overall width 29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22"
Conduit
40"
D
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Overall depth with handle 27-3/16"
E – Overall height with trim 28-3/8"
F – Overall width 29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2" MAX.
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
F
E
22
"
Conduit
40"
D
Cutout depth
23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Overall depth with handle 27-3/16"
E – Overall height with trim 28-3/8"
F – Overall width 29-3/4"
PT7050
JT5000
JT3000
JT1000
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
Dimensions and Installation Information (in inches)
Most 30” Wall Cabinets can be used with
this unit.
Note: These ovens are not approved
for stackable installations. Cabinets
installed adjacent to wall ovens must
have an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
Side-by-side installations require at least 2"
between cutouts.
KW Rating
240V 4.5
208V 3.4
Breaker Size
240V 20 Amps
208V 20 Amps
PT7050
Specification Revised 4/13 220252
PT7050SF
GE Profile™Series 30 in. Built-In Single Convection Wall Oven

Optional Undercounter Dimensions and Installation Information
Listed by
Underwriters
Laboratories
*ADA qualified based
on Uniform Federal
Accessibility Standards
For answers to your Monogram®or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center®service, 800.626.2000.
*
Note: 36" ribbon cooktop are approved for use
over GE 30" single wall ovens and warming
drawers. 30" ribbon cooktops are approved
for use over 30" and GE 27" single wall ovens
and warming drawers. Refer to cooktop and
wall oven installation information packed with
products for current dimensional data.
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Installation information: Before installing,
consult installation instructions packed with
products for current dimensional data and for
alternate installation options.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Power cord
for cooktop
Junction box
for oven
Junction box in
adjacent cabinet
for cooktop
hook-up
2 (two) 90°elbows &
sufficient pipe to
connect in adjacent
cabinet
Right cabinet side
3/4" Support
Shut-off
valve
Pressure
regulator
1/2" Black
iron pipe
Union
Conduit
40"
30" built-in
oven
3-1/2" MIN.
Free space
4"
3-1/4
22
Side View
25
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
240V / 208V
Junction box
location
36"
Typical
countertop
height
24
4
"
Allow 1-1/4"
top/bottom and
1" on sides for
overlap
28 1/2" MIN.
28 5/8" MAX.
9-1/2"
27 1/4" MIN.
27 5/16" MAX.
3/4" Support
platform required
Must Support 200 Lbs.
22" MIN.
Above
support
platform
Side by Side single ovens
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Cutout -
observe all
dimensions and
requirements.
Cutout -
observe all
dimensions and
requirements.
Center Line
30" models
2 " MIN.
27" models
Side by Side single ovens under
cooktop and counter
Side-by-Side Installations
Install two ovens in separate cutouts.
Cooktop
Center LineCenter Line
NOTE: One cooktop may be centered over either oven in
the side-by-side istallation.
Cutout - observe
all dimensions and
requirements.
Cutout - observe
all dimensions and
requirements.
30" models
2 " MIN.
27" models
Dimension and installation information are shown in inches.
Specification Revised 4/13 220252
PT7050SF
GE Profile™Series 30 in. Built-In Single Convection Wall Oven

Features and Benefits
• True European Convection with Direct Air - Bakes evenly as warm
air blows from the top in and around bakeware
• Ten-Pass Bake Element - Even baking is assured with heat that
covers more surface area
• Ten-Pass Dual Broil Element - Large and small dishes brown
evenly with two, full-coverage elements
• Self-Clean Heavy-Duty Roller Rack - Easily access items with a
rack that glides smoothly
• Progressive Halogen Oven Lighting - See what you’re baking with
lights that slowly illuminate the oven
• Self-Clean with Steam Clean Option - Clean your oven the way
you want
• Glass Touch Controls - Set temperatures quickly and clean with
little effort
• 5.0 cu. ft. Oven Capacity - Cook more dishes at once
• Black Gloss Oven Interior - Enjoy a clean and sleek appearance
• Hidden Bake - Make cleanup easy by eliminating hard-to-
reach areas
• Model PT7050SFSS - Stainless steel
PT7050SFSS
Specification Revised 4/13 220252
PT7050SF
GE Profile™Series 30 in. Built-In Single Convection Wall Oven