TPX24BIDBB—GE Profile™23.5 Cu. Ft. CustomStyle™Side-by-Side Refrigerator
Specification Revised 5/00
Rough-In Dimensions (in inches) Door Panel Dimensions (in inches)
8' Ceiling
13" to 14"
Cabinet
12"
Soffit
70-1/4"*
36"
24"
*The rough-in dimension of 70-1/4" is minimum and is measured from the
finished floor to top of opening (or the underside of the overhead cabinets).
For Models with Trim Kit: If frameless style cabinets are planned for above the
refrigerator, you may need to consider adding a maximum of 1/4" (70-1/2") to
height of opening to allow additional clearance between cabinet doors and
top of refrigerator trim when cabinet doors are in open position.
Standard, New Construction and
Replacement Installation
Installation Tips to Maximize the Built-In Look
•All wall/floor moulding should be removed prior to
installation.
•Water recess on rear wall recommended to
prevent water line damage. 48" minimum
length 1/4" diameter water line tubing
recommended.
•When possible, recess both water line and
electrical outlet. (See local codes)
•Front and rear leveling legs are adjustable for
the “Built-In” look. (See owner’s manual)
•If optional collar trim kit is to be used or
anticipated, see collar trim installation on next
page for different rough-in dimensions.
Detail C
(Fresh Food panel shown)
Notch required at top
corner as noted.
1/4" Max.
Panels 1/4" thick
or less
25"
Counter
Top
ElectricalWater
3/4" Airspace
(1/2" Gap + 1/4"
Wall Plates)
24"
Cabinet
Order your own custom wood panels
to match cabinetry or other decor.
E
C
Detail C Detail C
Fresh Food Panel
Freezer Panel
Without Dispenser Freezer Panel
With Dispenser
D
F
H
Detail C
*For 24 cu. ft. models only
B
A G
2"* 2"*
1"* 1"* 1"*
11-1/4"*
1-1/8"1-1/8"
2-3/8" 2-3/8"
4-13/16"*
11-1/4"*
11-1/4"*
37-5/8"* 37-5/8"*
Fresh Food Freezer Panel Freezer Panel
Panels With Dispenser Without Dispenser Weight Limits*
G-65-3/16" C-18-3/4" E-32-3/8" Fresh Food = 38 lbs.
21 cu. ft. H-20-1/16" D-14-5/16" F-14-5/16" Freezer = 28 lbs.
G-67-1/8" C-18-13/16" E-34-5/16" A-67-1/8" Fresh Food = 35 lbs.
24 cu. ft. H-19-5/16" D-14-1/2" F-14-1/2" B-14-1/2" Freezer = 25 lbs.
Panels up to 1/4" thick will fit door frame with no special preparation. *Total weight of panels
Add filler behind material thinner than 1/4" for proper fit. (i.e. both freezer panels)
Note: Panels up to 3/4" will require special routing area around handles.
Dimensions may vary depending on depth of panel.
Manufacturer Certified to
ASSOCIATION OF HOME
APPLIANCE MANUFACTURERS
ANSI/AHAN HRF-1-1979
VOLUME and
SHELF AREA
Total volume and shelf
area are calculated by the
Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile Performance Series,™
GE Profile™or GE appliance questions, call
GE Answer Center®service, 800.626.2000.
IMPORTANT: Before finalizing for your
GE Profile Performance™ and GE Profile™
CustomStyle™ Refrigerator, please NOTE:
• A minimum of 36” is required for
Refrigerator installation.
• Be sure to allow for 1/2” or 3/4” side panels in
addition to the 36” minimum.
