GE GTWN4450M User manual

For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
GTWN4450M
GE®3.6 DOE cu. ft. stainless steel capacity washer
Specification Revised 4/11 360199
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 120V, 60Hz, 10A
Note: Washer wall outlet must be located within 36” of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Dimensions and Installation Information (in inches)
36
25-1/2
42
51
Side View
27
Rear View

Features and Benefits
• ENERGY STAR®Qualified - Meets or exceeds federal guidelines for energy
efficiency for year-round energy and money savings
• H y d r o W a v e ™wash system - Longer, slower* travel through water improves
cleaning performance and is gentler on your clothes *Compared to a
non-HydroWave washer, WDSR2120
• PreciseFill with 5 water level selections - Washer will automatically measure
the load size and add just the right amount of water, or choose from 5 pre-set
water levels
• Clear glass lid - Allows you to view clothes during the cleaning process, without
opening the lid or stopping the wash cycle
• Rotary electronic controls with cycle status lights - Make it easy to select and
monitor wash cycles
• 5 wash/spin speed combinations - Washer alternates speeds for great
clothes care
• 3-speed motor - Multiple speed options are designed to handle different types
of wash loads
• 6 wash/rinse temperatures - Multiple settings offer a greater degree of control
over fabric cleaning and care
• Model GTWN4450MWS – White
GTWN4450M
Modified Energy Factor (MEF) 2.07
Water Factor (WF) 6.0
GTWN4450M
GE®3.6 DOE cu. ft. stainless steel capacity washer
Specification Revised 4/11 360199