Geevon W22146 User manual

GEEVON COLOR WEATHER STATION
Item No.W22146
User Manual
Features & Benefits:
DISPLAY UNIT & OUTDOOR SENSOR
1. SNOOZE and light
2. Alarm
3. SNOOZE
4. Calendar
5. Weekday
6. Time display
7. Low battery display
8. Indoor temperature
9. Indoor humidity
10. Channel 1 temperature and humidity
11. Set button
12. Alarm button
13. Max/min button
14. CH button
15. Down button
16. Up button
17. Pressure display
18. Weather forecast
19. Outdoor signal icon
20. Channel 3 temperature
21. Channel 3 humidity
22. Channel 2 humidity
23. Wall mount hole
24. Compartment 3xAAA batteries (batteries not included)
25. USB charging port
26. External power supply socket
27. SENSOR temperature and humidity
28. Wireless signal indicator
29. Hang hole
30. Channel for outdoor sensor
31. Compartment 2xAAA batteries (batteries not included)
Main features:
• 7 function keys: , , , , , ,SNZ/LIGHT;
• Time display 12/24Hr format optional;
• Double alarm and snooze function;
• Low battery detection function;
• 3 channels of outdoor temperature and humidity are
displayed on the same screen;
•Comfort display;
• Indoor temperature range -9.9℃～+50℃(14.2℉～122.0℉),
resolution 0.1℃/℉
• Outdoor temperature range -25℃～+50℃(-13℉～122.0℉),
resolution 0.1℃/℉
• Humidity range 20~95%, resolution 1%;
• Air pressure range: 850hPa ~ 1100hPa;
• 6-level weather forecast pattern display: sunny, cloudy,
cloudy, light rain and heavy rain and snow;
• ICE Alert;
• The pressure unit mb/hPa or inHg is optional;
• Backlight function, 5 levels backlight;
Setting up power supply Base device
1. Insert the DC connector into the connection socket of the
base station.
2. Insert the mains plug into the power outlet.
3. The device is energized directly.
NOTICE! For permanent operation, mains power supply
is recommended. Alternatively a power supply with
batteries is also possible, to keep the time setting in case
of power failure.
Proceed as follows: Remove the battery compartment cover.
Insert the batteries into the battery compartment. Ensure that
the battery polarity (+/-) is correct. Replace the battery
compartment cover.
Remote sensor:
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment. Ensure
that the battery polarity (+/-) is correct.
3. Set the channel selector switch to the desired channel.
4. Replace the battery compartment cover.
NOTICE! This weather station can be operated with one
or more remote sensors. Each remote sensor being
connected must be operated on a different channel. If
only one remote sensor is connected, it should be
operated on channel 1.
Time setting
1.In the standard mode, press and hold the for approx. 3
seconds to enter the time setting mode, and the set item will
flash and display. The sequence is as follows:
Thank you for purchasing W22146 Color Weather Station
Please take a moment to read this guide and store it for future reference.

12/24HR→Hour→Minute→Date Format→Year→Month→Day
→Week Language→Weather forecast→Barometric Pres-
sure Unit→ Barometric Value→ Exit.
NOTICE! Only 5 five kinds of weather can be preset.
There are Sunny, Slightly cloudy, Cloudy, Rainy and
Heavy rainy. When the temperature is below 25°F(-4°C)
and the weather forecast is rainy or heavy rainy, the
weather icon will show snowy.
3.During the setting process, press the or to select the
value. Each time you press the set item, add or subtract 1 up
or down. Press and hold to quickly add and subtract. In the
setting state, if there is no effective operation within 20 seconds,
it will automatically exit the setting and save the set value.
Alarm setting
1.Short press button to check the alarm time, the sequence
is AL1→AL2→return to the standard mode.
2.Press and hold the button for 2 seconds to enter the
ALARM setting, the setting sequence is: AL1 hour → AL1
minute → AL2 hour → AL2 minute → Exit
3.When the setting item is flashing, press the or to
select the value. short press once to step 1, press and hold
for more than 2 seconds to adjust quickly.
4.In standard mode, Press the to turn on or turn off the
alarm. The setting order is : AL1 Alarm→ AL2 alarm → AL1
and AL2 alarms → Exit.If the alarm turn on. The alarm symbol
will be displayed.
Snooze function
When the alarm is ringing, short press this button once to
pause the alarm and enter the snooze mode for 8 minutes, the
ZZ symbol and the corresponding alarm clock symbol flash.
C/F select
In normal mode, press to select ℃ or ℉.
Channel select
In normal mode, press the button to select Channel 1,
Channel 2 or Channel 3. Hold the CH button for approx. 3
seconds to reset values and search for an RF signal.
NOTICE! Always make sure the channel chosen on the
display unit matches the channel option chosen on the
outdoor sensor.
Backlight
When connect with adaptor, press the SNZ/LIGHT button to
adjust the brightness. it has 5 levels backlight.
When connect with batteries, press the SNZ/LIGHT button to
adjust the brightness. The setting order: High light→off.
NOTICE! For permanent operation, the mains power
supply is required. Alternatively, a power supply with
batteries is also possible, to keep the time setting in case
of power failure.
Weather Forecast
The weather station will calculate a weather forecast for the
next 12 hours on basis of the measured values. It has 6 kinds
of dynamic weather forecast: Sunny,Slightly cloudy , Cloudy,
Rainy, Heavy rainy , Snowy.
MAX and MIN temperature and humidity record
In standard mode, Press button to check the indoor and
outdoor temperature and humidity record.Press and hold
the button for approx 3 seconds to clear the record.
Placement of the Device:
Proper placement of both the display unit and the outdoor
sensor are critical to the accuracy and performance of this
product.
DISPLAY UNIT PLACEMENT
Place the display unit in a dry area free of dirt and dust.
Display unit stands up right for tabletop/countertop use.
Important Placement Guidelines
a. To ensure accurate temperature measurement, place units
out of direct sunlight and away from any heat sources or
vents.
b. Display unit and outdoor sensor must be within 200feet
(60m) of each other.
c. To maximize wireless range, place units away from large
metallic items, thick walls, metal surfaces, or other objects
that may limit wireless communication.
d. To prevent wireless interference, place both units at least
3ft (1 m) away from electronic devices (TV, computer,
microwave, radio, etc.)
OUTDOOR SENSOR PLACEMENT
a. The sensor must be placed outside to observe outdoor
conditions. It is water resistant and designed for general
outdoor use, however, to prevent damage place the sensor in
an area which is protected from the direct weather elements
and direct sunshine. The best location is 4 to 8 feet above the
ground with permanent shade and plenty of fresh air to
circulate around the sensor.
b. Display unit and outdoor sensor must be within 200 feet of
each other.
c. In order to maximize the wireless range, place units away
from large metallic items, thick walls, metal surfaces or other
objects that may limit wireless communications.
d. To prevent wireless interference, place both units at least 3
feet away from
electronic devices (EX: TV, computer, microwave etc.)
Technical data
Main unit:
Radio controlled signal: WWVB
Power supply: DC 5V 150 mA adaptor
Batteries: 3x AAA Battery
Temperature measuring unit: °C / °F
Indoor Temperature display range: -9.9℃～50℃
Outdoor Temperature display range: -25℃～+50℃
Humidity display range: RH 20% - 95%
Remote sensor:
Batteries: 2x AAA Battery
Technical Support
If your Geevon product does not operate properly, please
contact the seller on your order page or shoot an email to :
[email protected].
TV
(200 feet maximum)
(60 meters)
(0.9 m)
3feet
AT
LEAST
APART
Sunny Slightly cloudy Cloudy
Rainy Heavy rainy Snowy