Genaray MonoBright LED BI-COLOR 750 User manual

MonoBright LED Bi-Color 750 - USER MANUAL 1
USER MANUAL
MonoBright™
LED BI-COLOR 750

MonoBright LED Bi-Color 750 - USER MANUAL
2
Thank you for choosing Genaray.
The Genaray MonoBright™ LED Bi-Color 750 incorporates
the HiBrite Bi-Color microLED PCB to provide energy
efficiency, high efficacy, and low heat in a compact, lightweight
monolight housing. The MonoBright Bi-Color emits an
intense 8,000 lux (lx) of continuous light and draws only
100 W to deliver the equivalent output of a 750 W open-face
tungsten light. Its microLED circuitry offers outstanding
longevity with 50,000 hours of use. The bi-color feature
lets you adjust the color temperature from 3200–5600 K
to customize and fine-tune your light, and a high color
rendering index (CRI) of ›90 optimizes color accuracy.
The MonoBright LED Bi-Color is compatible with worldwide
AC voltages (with appropriate plug adapter) and can also
be run on an optional 12 V DC battery. Thanks to its small,
lightweight build and convenient carry handle, the MonoBright
is perfect for the traveling or location photographer.
MonoBright™
LED BI-COLOR 750
INTRODUCTION

MonoBright LED Bi-Color 750 - USER MANUAL
The MonoBright LED Bi-Color offers brightness
adjustment from 100%–10%, which can be controlled
from either the rear panel or an optional 2.4 GHz
wireless transmitter. The transmitter can also control
the unit’s color temperature, making it a convenient
remote for use in a sophisticated lighting setup. During
the course of a shoot, you can turn the unit off from
either the control panel or the transmitter, and it will
retain your settings the next time you turn it on.
This LED’s monolight housing makes adding
accessories easy. The built-in umbrella receptacle
and S-mount allow you to attach light modifiers
like umbrellas, softboxes, and beauty dishes to
customize and sculpt your light for the perfect look.
Introduction ................................2-3
Precautions ................................4-5
Overview ......................................6-9
Mounting the MonoBright ..........10
Mounting Accessories ...........11-12
Powering the MonoBright ....13-14
The Control Panel ..................15-17
Specifications .........................18-19
FCC Statement .............................19
Warranty .......................................20
TABLE OF
CONTENTS

MonoBright LED Bi-Color 750 - USER MANUAL
4
PRECAUTIONS
· Please read and follow these
instructions and keep this
manual in a safe place.
· Keep this product away from water
and any flammable gases or liquids.
· Do not leave the device in a
closed vehicle under the sun
or in other areas subject to
very high temperatures.
· Remove the front transport cap before
operating the MonoBright Bi-Color.
· Make sure this product is powered off
when plugging it into a power source.
· Always remove the power cord by
holding the plug; do not pull the cord.
· Disconnect the power cord from
the power supply when not in use.
· Use only the correct,
recommended voltage.
· Do not attempt to disassemble
or repair this product. There are
components inside that can produce
a hazardous electric shock.
· Do not stare at the light
when it is powered on.
PRECAUTIONS

MonoBright LED Bi-Color 750 - USER MANUAL 5
PRECAUTIONS
· Do not point directly towards the
naked eye (especially those of
infants and small children)—it
may lead to visual impairment.
· Avoid any unnecessary impact to the
unit, as this can damage the LED.
· Handle this product with care.
· Do not touch the LED or
expose it to moisture.
· If necessary, clean the LED
with only a lint-free, cotton
cloth. Do not smudge.
· Keep this product away from children.
· Make sure that this product is intact
and that there are no missing parts.
· All photos are for illustrative
purposes only.

MonoBright LED Bi-Color 750 - USER MANUAL
6
PRODUCT
OVERVIEW
Umbrella
receptacle
Locking knob
HiBrite Bi-Color
microLED PCB
S-mount
Mounting socket

MonoBright LED Bi-Color 750 - USER MANUAL 7
PRODUCT OVERVIEW
Accessory release
Umbrella thumbscrew Tilt adjustment
knob
Handle

MonoBright LED Bi-Color 750 - USER MANUAL
8
DC and AC
adapter XLR
input socket
Power Switch
Display
Dimmer knob
Dimmer indicator ( )
Color temperature
indicator ( )
Wireless sensor
PRODUCT
OVERVIEW

MonoBright LED Bi-Color 750 - USER MANUAL 9
Transport
cap
AC/DC
adapter AC cable
Diffuser
cover
7˝ umbrella/grid
reflector
PRODUCT OVERVIEW

MonoBright LED Bi-Color 750 - USER MANUAL
10
MOUNTING THE
MONOBRIGHT
1. Make sure the tilt adjustment
knob is fully tightened.
2. Loosen the locking knob on the
mounting socket and mount the
MonoBright on your lightstand or
other mounting equipment.
3. Tighten the locking knob until secure.
You can adjust the tilt of the MonoBright Bi-
Color by loosening the tilt adjustment knob.
Keep one hand on the light to hold it steady.
.
INSTRUCTIONS

MonoBright LED Bi-Color 750 - USER MANUAL 11
MOUNTING
ACCESSORIES
THE ACCESSORY MOUNT
After mounting the MonoBright Bi-Color,
you will need to attach the reflector or
another light modifier. The MonoBright Bi-
Color is equipped with an S-type accessory
mount for attaching light-shaping tools
like softboxes, beauty dishes, and snoots,
as well as the included 7˝ umbrella/
grid reflector with an umbrella hole.
Before mounting an accessory, remove
the transport cover by pulling the
accessory release and rotating the
transport cover counterclockwise.
To install an accessory, follow these steps:
1. Align your accessory’s mounting pegs
with the corresponding notches on
the MonoBright Bi-Color’s S-mount.
INSTRUCTIONS

MonoBright LED Bi-Color 750 - USER MANUAL
12
is proprietary to the Raya Speed Ring,
you would need to make sure that the
Raya Speed Ring is compatible with the
MonoBright. In this case, the Raya Speed
Ring is compatible with the MonoBright’s
S-mount, so you’re good to go.
THE UMBRELLA RECEPTACLE
The MonoBright Bi-Color is built with an
integrated umbrella receptacle. To install
an umbrella, insert your umbrella shaft
into the umbrella receptacle and tighten
the umbrella thumbscrew until secure.
Note: When attaching an accessory with
an umbrella hole, such as the included
reflector, make sure the accessory’s
umbrella hole is aligned with the
MonoBright’s umbrella receptacle
located above the mounting socket.
2. Insert your accessory into the
S-mount and rotate it clockwise
until it locks into place.
If desired, the included diffuser cover
can be stretched over the 7˝ reflector
to help soften the light output.
To remove the accessory, pull the
accessory release and rotate the
accessory counterclockwise.
When mounting a softbox, make sure your
softbox’s speed ring is compatible with
the S-mount. For example, if you want to
mount the Raya 32˝ Octa Soft Box, which
INSTRUCTIONS

MonoBright LED Bi-Color 750 - USER MANUAL 13
INSTRUCTIONS
POWERING THE
MONOBRIGHT
There are two ways to power
the MonoBright Bi-Color: AC
or a 12 V DC battery.
Important!
Do not turn on the MonoBright Bi-Color
while the transport cover is mounted.
AC POWER
To power the MonoBright Bi-Color via
AC power, make sure the unit is turned
off. Connect the AC cable to the AC/
DC adapter and a wall outlet, and then
connect the adapter’s XLR connector to
the MonoBright Bi-Color’s XLR input.
To turn on the MonoBright Bi-
Color, press the power switch.

MonoBright LED Bi-Color 750 - USER MANUAL
14
12 V DC BATTERY
To power the MonoBright Bi-Color via a 12 V
DC battery, make sure both the MonoBright
Bi-Color and the battery are turned off,
and use a compatible Genaray MonoBright
battery cable to connect the MonoBright
Bi-Color’s DC XLR power socket to your
12 V DC battery. Both the battery and
the cable are available separately.
For batteries with an XLR connector,
use the Genaray MB-BCXLR cable. For
batteries with a cigarette lighter connector,
use the Genaray MB-BCCL cable.
Note: Use only Genaray MonoBright
battery cables with MonoBright LED lights.
Cables from other manufacturers may be
incompatible and may cause damage.
Important!
Make sure to connect and disconnect
the XLR plug only when the MonoBright
Bi-Color’s power switch is in the Off
position, and your 12 V DC battery is
turned off if it has a power switch.
Make sure the connections to the
MonoBright Bi-Color and battery are
securely locked before turning on the
MonoBright Bi-Color and battery power.
To turn on the MonoBright Bi-Color,
first turn on your 12 V DC battery (if it
has a power switch) and then press the
MonoBright Bi-Color’s power switch.
INSTRUCTIONS

MonoBright LED Bi-Color 750 - USER MANUAL 15
ADJUSTING POWER OUTPUT
You can adjust the MonoBright’s power
output from 10%–100%. The selected
output appears on the display as
10–99, from dimmest to brightest.
To adjust power output via the control panel,
make sure the blue ( ) dimmer indicator
is glowing. If it’s not glowing, press the
dimmer knob to enter power output mode,
and the output will appear on the LED
display. Rotate the knob to adjust the output.
Adjustments are made via the control
panel’s dimmer knob. The knob is
graduated, so each notch is one
increment. Quickly moving the knob
will accelerate the speed at which you’ll
reach the top or bottom of the scale.
INSTRUCTIONS
THE CONTROL
PANEL
Bi-Color
Orange ( )
Channel
None
Power Output
Blue ( )
Channel
None
Power Output
Blue ( )
Press the knob to switch between power
output and bi-color modes. Press and hold
the knob to enter the channel mode. The
status LEDs indicate the current mode.

MonoBright LED Bi-Color 750 - USER MANUAL
16
ADJUSTING COLOR TEMPERATURE
You can adjust the MonoBright Bi-Color’s
color temperature from 3200–5600 K. The
selected color temperature appears on the
display as 32–56, from warmest to coolest.
To adjust color temperature via the
control panel, make sure the orange ( )
color temperature indicator is glowing.
If it’s not glowing, press the dimmer
knob to enter color temperature
mode, and the color temperature will
appear on the display. Rotate the knob
to adjust the color temperature.
INSTRUCTIONS
SELECTING CHANNELS
On the MonoBright Bi-Color, 99 channels
(1–99) are available. You can use this option
with the optional wireless transmitter to
remotely control your MonoBright Bi-
Color’s output and color temperature.
You can also set multiple MonoBright
units to different channels and adjust
them in unison and at different power
outputs or color temperatures.
To select a channel via the control
panel, press and hold the knob until
the indicators turn off and the number
on the display blinks to indicate the
channel number. Rotate the dimmer
knob to cycle through the channels.

MonoBright LED Bi-Color 750 - USER MANUAL 17
INSTRUCTIONS
When adjusting power output or color
temperature via the wireless transmitter
(available separately), the output value will
not appear on the MonoBright Bi-Color’s
display if the unit is in color temperature
mode, and vice versa. To display the value,
you can manually change the mode on the
MonoBright Bi-Color’s control panel (see
Adjusting Power Output on page 15 and
Adjusting Color Temperature on page 16).

MonoBright LED Bi-Color 750 - USER MANUAL
18
Light source: HiBrite Bi-Color microLED PCB
Lamp life: 50,000 hr.
Luminance: 8,000 lx @ 3´ (1 m)
Electrical consumption: 100 W
Tungsten output equivalent: ~750 W
AC operating voltage: 100–240 V AC,
50/60 Hz
DC operating voltage: 12–17 V DC
Cable length
AC cable: 15.5´ (4.7 m)
XLR connector (female): 12´ (3.7 m)
Color temperature: 3200–5600 K (±300 K)
CRI: ›90
Dimming: 10%–100%
Heat dissipation: 25 dBA fan
Wireless receiver: Built-in 2.4 GHz receiver
DC connector: 4-pin XLR
Dimensions: (D × W × H) 8˝ × 6˝ × 8.25˝
(20.3 × 15.2 × 20.9 cm)
Weight: 2.6 lb. (1.2 kg)
PRODUCT
SPECIFICATIONS
MonoBright LED Bi-Color 750
SPECIFICATIONS

MonoBright LED Bi-Color 750 - USER MANUAL 19
SPECIFICATIONS
Beam angle: 60°
Diameter: 7˝
Reflector type: Umbrella/grid reflector
Finish: High-gloss polish
Reflector
FCC
STATEMENT
This device complies with Part 15 of the FCC
rules. Operation is subject to the follow two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.

MonoBright LED Bi-Color 750 - USER MANUAL
20
ONE-YEAR LIMITED WARRANTY
This Genaray product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date
or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of
any product that fails during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by Genaray. If the product
has been discontinued, Genaray reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specific legal rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Genaray along with
the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information, or to arrange service, visit www.genaray.com or contact us at [e-mail].
© 2015 Genaray LLC. All Rights Reserved.
GG1