Genaray SpectroLED 14 User manual

USER MANUAL
SpectroLED 14
Flood Light

SpectroLED-14 Flood Light - USER MANUAL
2
THANK YOU FOR CHOOSING GENARAY
The Genaray SpectroLED 14 LED Flood Light fixture
provides photographers and videographers with a bright and
continuous daylight-balance light source with broad 120°
coverage. This 120 W LED fixture can operate on AC or battery
power, and it features flicker-free dimming from 100% to
10% along with a high CRI for precise color accuracy and
rendering.
This LED fixture features SDM technology for the widest
coverage offered by LED lights. When used with its dedicated
31.5-inch octagonal softbox (sold separately), the light
delivers an even, wraparound light that’s perfect for portrait
photography as well as video interviews. For multi-light
setups, the dimmer can be controlled from up to 100 feet away
with Genaray’s wireless remote (sold separately). Because
LED lights produce very little heat, the SpectroLED 14 can be
used for extended periods without overheating.
SPECTROLED 14
FLOOD LIGHT
INTRODUCTION

SpectroLED-14 Flood Light - USER MANUAL 3
· Please read and follow these
instructions, and keep this
manual in a safe place.
· Keep this unit away from water and
any flammable gases or liquids.
· Make sure the unit is powered off
when plugging it into a power source.
· Use only the correct,
recommended voltage.
· Handle the unit with care.
· Do not attempt to disassemble or
repair the equipment—doing so will
void the warranty, and Genaray will
not be responsible for any damage.
· Do not stare directly at the lights
when they are powered on.
· Clean the unit with only
a soft, dry cloth.
· Images are for illustrative
purposes only.
PRECAUTIONS
Precautions

SpectroLED-14 Flood Light - USER MANUAL
4
SPECTROLED 14
FLOOD LIGHT
OVERVIEW
Angle adjustment knob
Flex rod holes

SpectroLED-14 Flood Light - USER MANUAL 5
Product overview
LED screen
Dimmer knob
Locking
knob
Two-pin
connection
Power
switch
Umbrella
socket

SpectroLED-14 Flood Light - USER MANUAL
6
CONTENTS INCLUDE
MOUNTING THE
SPECTROLED 14
· Light with 5/8 in. mount
· AC adapter
· Power cord
· Diffuser cap
· User manual
Mount the SpectroLED 14 on any heavy-
duty light stand with a 5/8-inch baby-pin,
and turn the locking knob until secure.
contents

SpectroLED-14 Flood Light - USER MANUAL 7
USING THE SPECTROLED 14
WITH BATTERY POWER
The SpectroLED 14 can be powered by
a V-mount battery. When attaching the
battery, make sure the power switch
is in the off position, and the fixture
is not plugged into a wall outlet.
Three-stud batteries can be used by
connecting them to the SpectroLED 14
with a D-tap power cable (not included).
POWERING THE
SPECTROLED 14
The SpectroLED 14 can be powered
directly from an AC outlet or by a
V-mount battery (not included).
USING THE SPECTROLED
14 WITH AC POWER
Important!
The SpectroLED 14 is a multivoltage
fixture capable of running on 100–240 V,
50/60 Hz. The included cable has a 120 V,
50 Hz (North American) plug. To use this
fixture with other voltages, you must
use a plug adapter (sold separately).
Connect the AC power adapter to the
SpectroLED 14 with the 2-pin cable, and
plug the power cord into an outlet.
instructions

SpectroLED-14 Flood Light - USER MANUAL
8
ADJUSTING THE
BRIGHTNESS
MOUNTING AN
UMBRELLA
Rotate the dimmer knob to increase
the brightness to 100% or to decrease
the brightness to 10%. The brightness
output will show on the LED screen.
Important!
Make sure the light is turned off
before mounting an umbrella.
Insert the umbrella into the umbrella socket
located in the center of the LED array.
Adjust the umbrella as necessary. The
pressure from the umbrella socket
will hold the umbrella in place.
instructions

SpectroLED-14 Flood Light - USER MANUAL 9
WIRELESS
OPERATION
The SpectroLED 14’s dimmer can be
controlled wirelessly with the Genaray
MB-WRT Wireless Remote (not included).
SELECTING A CHANNEL
1. Press and hold the dimmer
knob. The channel number and
the LED array will blink.
2. Use the dimmer knob to select a channel
(1 to 99), and press the dimmer knob
to set the selection. The LED screen
will return to showing the brightness,
and the LED array will stop blinking.
Important!
Make sure the Genaray Wireless Remote
is set to the same channel as the
SpectroLED 14. For more information, refer
to the Wireless Remote’s user manual.
instructions

SpectroLED-14 Flood Light - USER MANUAL
10
PRODUCT
SPECIFICATIONS
Mount: 5/8 in. baby pin
Diameter: 14.5 in. (36.8 cm)
Depth: 7 in. (17.8 cm)
Power Cable Length: 13 ft. (4 m)
Weight: 3.5 lb. (1.6 kg)
LED Count: 600
LED Type: Surface mount (SMD)
Color Temperature: 5600 K
Luminance: 4000 lx @ 1 m
Beam Angle: 120°
CRI: 96.3
TLCI: 92.7
Output Power: 120 W
Working voltage: AC: 100 to 240 V
DC: 14.8 V, 10 A (maximum)
sPecifications

ONE-YEAR LIMITED WARRANTY
This Genaray product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of one (1) year from the original purchase date
or thirty (30) days after replacement, whichever occurs later. Genaray’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at Genaray’s discretion, of
any product that fails during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by Genaray. If the product
has been discontinued, Genaray reserves the right to replace it with a model of equivalent quality and
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, GENARAY MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This
warranty provides you with specific legal rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Genaray Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Genaray along with
the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information, or to arrange service, visit www.genaray.com or contact us at [e-mail].
© 2017 Genaray. All Rights Reserved.

GG1