GENERAL MOBILE GMPods 2 Pro User manual

GMPods 2 Pro
Wireless Bluetooth Earphones
Quick Start Guide

Touch area
Anti-noise microphonePressure inspection hole
LED
LED
TYPE-C jack
Multifunction button
(MFB)
Microphone
Charging Pins

Initial Pairing;
1. Open the cover and remove the earphones from the charging
box.
2. Search for GMPods 2 Pro on your smart device and tap to
connect.
*The earphones will automatically turn on after being removed
from the charging box, or please recharge and try again.
To Change a Paired Device:
1. In order to disconnect the earphone and enable the pairing
mode, turn off the Bluetooth connection of device A.
2. Search for GMPods 2 Pro on device B and tap to connect.
*Multi-connection is not supported. Earphones will be automati-
cally connected to device B and turned on again.
Pairing with the Device

1. Place the earphones in the charging box and open the case
cover.
2. To restore the earphones to factory settings, hold down MFB
for 10 seconds or until the LEDs on the charging box and the
earphones ashes red and blue 3 times.
* If the earphones fail to connect, try the steps given above
Factory Settings

1. Put the earphones in your ear, then shake your head to check
the wearing stability.
2. Adjust the microphone towards your mouth to get better
calling and speaking experience.
3. Please put the earphone heads in your ears correctly, make
sure that they t tightly and the sound holes are inside the ear
canals.
How to put on the earphones

1. Take one of the earphones for connectivity to the phone (the
LED will ash red and green).
2. Search for GMPods 2 Pro on your smart device and tap to
connect.
Charging the Earphone
To charge the earphone, place it inside the charging box. While
charging, the LED will light up red and turn green for 1 minute
after the earphone is fully charged.
Charging the Charging Box
Charge the charging box using the USB cable. The LED on the
charging box will light up red when charging and turn green when
charging is complete.
Single Mode

Details of the Functions

Details of the Functions of GMPods 2 Pro

Dangerous Chemicals in the Product and Their Contents
This form was prepared in accordance with the SJ / T 11364 regulation.
O: means that the content of hazardous chemicals in the homogeneous
materials of this part is within the limits of the (EU) 2015/863 regulation.
X: means that the content of hazardous chemicals in at least one
homogeneous material of this part is beyond the limits of the (EU) 2016/863
regulation, but still complies with the EU ROHS Directive by exemption.
Not: Please use the time correctly, as using the device for a long time will
damage your hearing.
Apply the standard: Q / HL 1-2019; Q / HL 2-2017 Manufacturer: Dongguan
Hele Electronics Co., Ltd. Address: Daojiao Town, Dongguan City, Guangdong,
China
Part
Name
Main Section
Dangerous Substances
Battery
Earphone Types
Accessories
Charging Cable

Tips
1. Before using your earphone, please read the guide carefully and save it for future
reference.
2. The earphones need to be fully charged before the initial use.
3. If the earphones will not be used for more than two weeks, please remember to
charge them regularly.
4. Please use chargers manufactured by an approved manufacturer.
5. If your earphones cannot be detected by your phone, please check if they are in the
pairing mode. If left unconnected for a long time, the earphones will exit the pairing
mode, please re-enable the mode. If a procedural error occurs on your phone, restart
it. If a procedural error occurs on your earphones, restart or reset them.
Warnings!
1. To avoid damages or dangerous situations, never disassemble or modify your
earphones for any reason.
2. Do not store the earphones in extreme temperatures (below 0°C or above 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use the earphones during a storm to avoid erratic functions and increased
risk of electric shock.
5. Do not use abrasive chemicals or strong detergents to clean the earphones.
6. Keep the earphones dry.
Tips and Warnings