
8. Disconnect the device
To disconnect the Bluetooth connection on the Waveform
from a device, there are 2 ways to do it:
1. Hold the left and right ear for 5 seconds.
2. Leave the earbuds in the case and long press the 2 button
for 5 secs
9. Reset to factory setting
1. Put the earbuds into the SmartCase.
2. Connect the earbuds with the cable to a game console or
computer.
3. Hold the 1 button on the case for 15 sec.
4. Wait for the earbuds to sync.
10. App Feature
Our app “Genki Waveform” can be download on Apple store
and Google Play.
App Feature
Version 0.4.5
Active Noise Canc elling Control
Equalizer Presets
Customise Equalizer
Show Battery Status
Firmware Update
11. Specifications
Technical Features
Bluetooth 5.3 with aptX Adaptive technology
DualStream
Wireless and USB-C charging
Bluetooth Codecs
aptX – Adaptive
aptX – Classic
AAC
SBC
Bluetooth Profiles
A2DP v1.3.1
AVRCP v1.6.1
HFP v1.7.1
HSP v1.2
BLE GATT (Generic Attribute Profile)
Frequency Band
Tx mode: 2402MHz to 2480MHz, ISM Band
Rx mode: 2402MHz to 2480MHz, ISM Band
RF output power < 0r =10.0 dBm
Driver Units 10mm Dynamic Drive with Balanced Armature
Frequency Range 10Hz to 20kHz
Distortion (THD) <0.3% (1kHz/10mW)
Battery Life
Up to 14 hours Bluetooth + 28 hours case
Weight 6.5g each earbud, 47g for charging case