George & Willy LETTER LIGHT BOX MENU User manual

LETTER LIGHT BOX MENU
The Letter Light Box Menu is a simple and functional display
system for your cafe, gallery, or business.
Constructed from aluminum and acrylic, the Letter Light
Box Menu has a clean modern look that will fit right into your
interior space.
The Letter Light Box Menu also includes small and regular
acrylic letters to create your own personal menu.
Thank you for your purchase,
George & Willy

CARE GUIDE
Where you install your product depends on its material/s.
We advise you use a qualified builder for installing the Letter
Light Box Menu.
Wooden and Steel Products: We recommend using these
products inside or under a shelter where they are protected
from any exposure to rain or water.
Aluminum Products: These products are non-corrosive and
suitable for use outside.
Chalk Products: You should use traditional dry chalk. We
don't recommend using liquid chalk pens on our products.
Transportable Outdoor Signage: If there is exposure to wind,
we recommend bringing signage inside to protect it from the
extremes. We offer Sandbags to help support your product in
moderate wind conditions.

COMPONENTS
1 x Letter Light Box Menu
(with electrics attached)
2 x Wall Screws
1 x NZ/AU Plug
1 x EU Plug
1 x UK Plug
1 x US Plug
1 x Regular Acrylic Letters Pack
1 x Small Acrylic Letters Pack

1
Select a space to install your Letter Light Box Menu. If you
are mounting onto a drywall, the Letter Light Box Menu will
need to be fixed into a wooden stud to make sure it is
properly fixed.
Using a level, position the screws so it is perfectly level.
Insert the two screws into the wall by leaving 518mm gap in
between them.
518mm

Hang the Letter Light Box Menu onto the wall by aligning the
screws with the holes in the back of the Letter Light Box
Menu. Make sure the screws have securely nested in the
holes.
2

Your Letter Light Box Menu is ready to use!
You can now put the acrylic letters on to the front face of the
Letter Light Box Menu. Get creative and enjoy!
3

Once your Letter Light Box Menu is securely fixed you will
then need to decide what adapter plug best suits you. Plug it
in then switch it on.
4
Driver
Dimmer
6m of cable
(Choose your adapter)
NZ
AU

5
Once your signs plugged into the wall you can switch the
sign on and off and adjust the brightness using the dimmer.
After that you are all done! Your sign should be securely
installed, lit up and on display for people to see.
Dimmer

DISCLAIMER
George & Willy products have a lifetime warranty.
This only covers faulty workmanship and hardware.
Not the electronics.
It does not cover normal wear and tear, accidents, or
misuse of the product. If the defect was caused by a
manufacturing fault, the faulty product will be replaced
free of charge. If the original product is no longer in
production, it will be replaced with the most similar
product.
Please keep all parts out of reach of small children as
they may pose a choking risk.

CONTACT US
[e-mail]
www.georgeandwilly.com
@georgeandwilly
www.pinterest.com/georgeandwilly/

THANK YOU
Don’t forget to tag us on Instagram @georgeandwilly
For 10% off your next purchase, use the discount code:
WITHTHANKS