GhostEye 15000A User manual

© 2016 Cine Gears INC. All Rights Reserved
GHOSTEYE 15000A KIT
GHOSTEYETM
www.ghosteye.com
WIRELESS HDMI/SDI
VIDEO TRANSMISSION SUITE
USER MANUAL

© 2016 Cine Gears INC. All Rights Reserved
Important Information

© 2016 Cine Gears INC. All Rights Reserved
Important Information
● Although this product made in accordance with national electrical safety standards, it
still will occur noise with other machines mutual interference in rare cases. When
interference occurs, please maintain a certain distance from the other machines.
●Turn on the transmitter power must after connected the antenna.
●Receiver and transmitter do not set in metal racks that will hinder the wireless
communication.
●When the wireless communication start, the machine will take about 15-20 seconds to
boot the system. During this time, the media receiver cannot operate.
●Different software versions and functions cannot replacement or exchange.

© 2016 Cine Gears INC. All Rights Reserved
Important Information
Brief Introduction
Ghosteye 15000A transmitter and receiver low latency wireless HD
video transmission systems are based on H.264 CODEC and COFDM
digital modulation. The transmitter transmits HD video from HDMI
input and the receiver receives the signal wirelessly and presents
the video through HDMI output.
Features

© 2016 Cine Gears INC. All Rights Reserved
What is included
15000A x 1
Omni-directional
antenna (3dBi) x1
Power converting
cable x 1
15000A x 1
Power Adapter
(5V/1A) x 1
Omni-directional
antenna (3dBi) x1
7dBi Directional
panel antenna x 1
TX
RX

© 2016 Cine Gears INC. All Rights Reserved
Important Information
Structures and Interface
Alternate Interface Fan
Cooling holes
Strap holes
Power Input
MINI HDMI Interface
MINI USB Port
1. Mini USB Port :
2. Mini HDMI Interface :
3. Channel Selection Button :
4. Power input ( 4 pin connector ) :
5. RF Output (RPSMA connector ) :
6. LED Indicators :
Software upgrading
HDMI video input
Short press button, cyclic switiching
channels CH1-> CH2-> CH3-> CH4->CH1...
DC power input, 12V 1A
Connect to the antenna
Refer to "Indicator Light Instructions”

© 2016 Cine Gears INC. All Rights Reserved
Important Information
Structures and Interface
Receiver
Standby Button
1. USB port :
2. HDMI interface :
3. Standby Button :
4. Channel Up Button :
5. Channel Down Button :
6. OSD Button :
7. Power Input Interface :
8. RF output interface :
Software upgrade interface
HDMI video output
Standby
Short press button, cycle increase channel
CH1-> CH2-> CH3-> CH4-> CH1...
Short press button, cycle decreases channel
CH4-> CH3-> CH2-> CH1-> CH4...
Show the current status on TV
DC power input, 5V 1A
Connect to the antenna

© 2016 Cine Gears INC. All Rights Reserved
Important Information
Installation
UAV Camera
UAV Camera
Monitor
UAV batter y
1. Connect UAV battery and transmitter via p .ower converting cable

© 2016 Cine Gears INC. All Rights Reserved
Important Information
Indicators
TX:15000A
RX:15000A

© 2016 Cine Gears INC. All Rights Reserved
Important Information
Specifications
480i60、480P60、576i50、576P50、720P50、720P60、1080i50、
1080i60、1080P24、1080P25、1080P30
Bandwidth 6MHz
Delay 200mS
500mW
( Support 7V~30V )
≤
RX antenna 3dBi : transmission distance can reach 3
RX antenna 6dBi : transmission distance can reach 7~10km
RX antenna 7dBi : transmission distance can reach 7~10km
~5km