Gibson GRT17C2AW0 User manual

Gibson
Refrigerator
Espafiol ........... 21
Fran;ais. .......... 41
Welcome ....................... 2
H
Safety Instructions. .......... 3 I_
Installation -Inc.ud.Ccnne_.ng
Optional Ice Maker ToWater Supply ..... 4 - 5 m
D°°rRemoval& Reversal ....... 6 - 7
Features at a Glance ......... 8 I_
Temperature Controls ........ 9
n
Looking Inside .......... 10 - 11 U
Ice Service .................... 12 U
Food&EnergyStoragesavingTips ....... 13 D
Normal Operating Sounds..14
Care & Cleaning ......... 15 - 16
Warranty. ................. 17 - 18
Before You Call ............... 19
READ AND SAVE THESE INSTRUCTIONS PIN240435502(0107)

Congratulations on your purchase of a new refrigerator! We
here at Electrolux Home Products are very proud of our
product and we are completly committed to providing you
with the best service possible. Your satisfaction is our #1
priority.
Please read this Use & Care Manual very carefully. Itcontains
valuable information on how to properly maintain your new
refrigerator.
We know you'll enjoy your new refrigerator and Thank You
for choosing oar product. We hope you consider us for future
purchases.
PLEASE READ AND SAVE THESE INSTRUCTIONS
This Use & Care Manual provides specific operating
instructions for your model. Use your refrigerator only as
instructed in this manual. These instructions are not meant
to cover every possible condition and situation that may
occur. Common sense and caution must be practiced when
installing, operating and maintaining any appliance.
Please record your model and serial numbers below for
future reference. This information isfound on your serial
plate located inside the refrigerator compartment.
NOTE: Use onlysoap and water toclean serial plate.
Model Number:
Serial Number:
Purchase Date:
o
o
o
SerialPlate
Please complete and mail in the Product
Registration Card included with your
refrigerator.
Questions?
1-800-944-9044
(United States)
1-866-213-9397
(Canada)
Extend Your Warranty Protection
With An
Extended Service Contract
CALL 1-800-944-9044
To Enjoy These Benefits:
Total freedom from repair bills so
unexpected repairs won't upset your
budget.
Fast, convenient toll-free service is just
a phone call away.
Top-quality repairs by factory-trained
experts.
Quick access to genuine replacement
parts so you can rest assured your
refrigerator is repaired with the proper
components.
Please attach sales receipt
here for future reference.
2

FOR YOUR SAFETY
Do not store or use gasoline, or other flammable liquids
inthe vicinity of this or any other appliance. Read pro-
duct labels for warnings regarding flammability and other
hazards.
Do not operate the refrigerator inthe presense of
explosive fumes.
Avoid contact with any moving parts of automatic ice
maker.
Remove all stables from the carton. Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furniture.
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any exterior
wrapping material immediately after the refrigerator is
unpacked. Children should NEVER use these items to play.
Cartons covered with rugs, bedspreads, plastic sheets or
stretch wrap may become airtight chambers, and can quickly
cause suffocation.
PROPER DISPOSAL OF YOUR REFRIGERATOR
OR FREEZER
Risk of child entrapment _._._
Child entrapment and
suffocation are not problems of
the past. Junked or abondoned
refrigerators or freezers are still
dangerous- even if they will sit
for "just a few days." If you are
getting rid of your old refrigerator
or freezer, please follow the
instructions below to help
prevent accidents.
Before you throw away your old refrigeratorl freezer:
Remove doors.
Leave shelves in place so children may not easily climb
inside.
Have refrigerant removed by a qualified service
technician.
ELECTRICAL INFORMATION
The refrigerator must be plugged into its own
dedicated 115 Volt, 60 Hz., AC only electric outlet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards. It must be plugged directly
into a properly grounded three-prong receptacle. The
receptacle must be installed in accordance with local
codes and ordinances. Consult a qualified electrician.
Do not use an extension cord or adapter plug.
Immediately repair or replace any power cord that
becomes frayed or damaged.
Never unplug the refrigerator by pulling on the power
cord. Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord.
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock.
Performance may be affected if the voltage varies by
10% or more. Operating the refrigerator with insufficient
power can damage the compressor. Such damage is
not covered under your warranty.
Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
turned off accidentally.
Avoid connecting refrigerator to a Ground Fault
Interruptor (GFI) circuit.
NOTE: Turning the refrigerator temperature control to 1!0"
turns off the compressor, but does not disconnect
electrical power to the light bu!b or other electrical
components.
Groundingtype
wallreceptacle
Do not, under _'_
any circumstances, I
cut, remove, /
or bypass the /
grounding prong, j)
Powercordwith
3-pronggroundedplu_

This Use & Care Manual provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
Consider water supply availability for models equipped
with an automatic ice maker.
INSTALLATION
Do Not install the refrigerator where the temperature
will drop below 55°F (13°C) or rise above 110°F (43°C).
The compressor will not be able to maintain proper
temperatures inside the refrigerator.
Do Not block the toe grille on the
lower front of your refrigerator. Sufficient air
circulation is essential for the proper operation of
your refrigerator.
Installation Clearances
Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3!8"
Back I"
NOTE: if You see black coils/tubing Onthe back of Your
refrigerator (air-coo!ed condenser) leave 31'clearance at
top of refrigerator,
DOOR OPENING
NOTE: Ifyour refrigerator isplaced with the door hinge
side against a walt, you may have to allow additional
space so the door can be opened wider.
Your refrigerator should be positioned to allow easy access
to a counter when removing food. To make this possible, the
direction in which the doors open can be reversed. See Door
Removal & Reversal Instructions on page 6.
LEVELING
All four corners of your refrigerator must rest firmly on a
solid floor. Your refrigerator isequipped with adjustable front
rollers to help level your unit.
To Level Your Refrigerator:
1. Remove toe grille.
2. Use flat-blade screwdriver or 3/8" socket wrench
to adjust front rollers.
NOTE: Raise the front of the refrigerator enough so the
doors close freely when opened halfway. The refrigerator
should slope ¼'! to ½" from front-to-back. Then level the
refrigerator from side to side.
Raise
4

Installation -Connecting Optional Ice Maker To Water Supply
To avoid electric shock, which can cause death or severe personal injury, disconnect the
refrigerator from electrical power before connecting a water supply line to the refrigerator.
To Avoid Property Damage:
Copper tubing is recommended for the water supply line. Water supply tubing made of %" plastic is not
recommended since it greatly increases the potential for water leaks, Manufacturer will not be responsible for
any damage if plastic tubing is used for supply line,
•DO NOT install water supply tubing in areas where temperatures fall below freezing,
Chemicals from a malfunctioning softener can damage the ice maker, If the ice maker is connected to soft
water, ensure that the softener is maintained and working properly,
IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.
Before Installing The Water Supply Line, You Will Need
Basic Tools: adjustable wrench, flat-blade screwdriver, and Phillips TM screwdriver
Access to a household cold water line with water pressure between 20 and 120 psi.
A water supply line made of ¼ inch(6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,
you will need to measure the distance from the ice maker inletvalve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve.
A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
NOTE: Water line kit number 5303917950, available from your appliance deater at additional cost, contains 25 feet (7.6
meters) of ¼ inch OD copper tubing, a saddle type shutoff valve (nohpiercing), (2) ¼ inch brass compression nuts, (2)
ferrules/sleeves, and instructions for installinga water supply line.
To Connect Water Supply Line To Ice Maker Inlet Valve
1.
2.
3.
4.
5.
6.
7.
8.
9.
Disconnect refrigerator from electric power source.
Place end of water supply line into sink or bucket. Turn ON water supply
and flush supply line until water is clear. Turn OFF water supply at shut
off valve.
Unscrew plastic cap from water valve inlet and discard cap.
Slide brass compression nut, then ferrule (sleeve) onto water supply line,
as shown.
Push water supply line into water valve inlet as far as it will go (¼ inch).
Slide ferrule (sleeve) into valve inlet and finger tighten compression nut
onto valve. Tighten another half turn with a wrench; DO NOT over tighten.
With steel clamp and screw, secure water supply line to rear panel of
refrigerator as shown.
Coil excess water supply line (about 2½ turns) behind refrigerator as shown
10. To turn ice maker on, lower wire signal arm (see ice maker front cover for ON/
OFF position of arm).
_Steel Clamp
Bra_
Compression
Nut
water line
and arrange coils so they do not vibrate or wear against any other surface.
Turn ON water supply at shutoff valve and tighten any connections that _Copper waterline
leak. _ !r°mh_t_h01d_tersUPply
Reconnect refrigerator to electrical power source. _- (Includeenoughtubinginlooptoallow
mo_ngref_ga_outfordenning.)
IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may
cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored
or have poor flavor. Discard ice made during the first 24 hours.

Door Removal and Reversal Instructions
fqH_
_S=r_ ToolsNecessary:. _
Phlll_" head
Quadmx neao _AdJu,_ao_
Top Hinge
i
PlugsCabinetHole _" _ Top Hinge
Hinge Hole _Handle Hole
Plug Plug
Door
Screw _Stop
Washer
Hinge
.Pin
Center
_Hlnge
Hinge Hole
Plug Handle
Hole
Door Stop Door
Screw StOl
Hinge
_Pin
_BHing°t_em
7
roe Grille
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTE: The direction in which your refrigerator doors open (door swing)
can be reversed, from left Io right or right to left, by moving the door
_inges from one side to the other. Reversing the door swing should be
performed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "0" and remove the electrical power cord from the wall outlet. Remove
any food from door shelves.
1 Remove toe grille and top hinge cover
2. Remove top hinge with 3!8" hex driver and lift freezer door off of
center hinge pin. Set door aside,
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure olastic washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to
slide out. Tighten screws.
6. Loosen two outside screws on oDDosite side of refrigerator, remove
inside screw and install center hinge.
7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside screws
in holes and tighten. Inside screw will go to opposite side in step 8.
8. Remove two outside screws on ouoosite side of refrigerator and install
bottom hinge. Insert and tighten screw saved from steP 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin
to other hole in hinge and tighten with adoustable wrench.
10. Reverse door handles (see instructions on next page).
11. Move freezer and refrigerator door stops to opposite side.
12. Position refrigerator door onto lower hinge pin and screw center hinge
pin through center hinge into top of door. Close refrigerator door to
help align hinge hole
13. Tighten center hinge pin with ac ustable wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Cl°se freezer d°°r" Have an assistant lift uP °n °pp°site side °f d°°r
while tightening screws to install top hinge.
17. Replace toe grille and top hinge cover.
18. Plug in electrical power cord and turn refrigerator temperature control
to center position, Adjust setting as necessary,
6

Door Removal and Reversal Instructions (continued)
TO REMOVE FREEZER HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to bottom of freezer door.
2. Swing bottom of handle away from the door and slide handle straight up
and off of dovetail button.
3.
4.
Remove screw and dovetail button and install on other side, using the same
holes as nameplate.
Magnetic Nameplate Models: Use puttyknife to gently pry magnetic nameplate
frame from door. Remove nameplate from its frame, turn frame upside down
and install in old handle holes. Insert magnetic nameplate into frame.
Self-Adhesive Nameplate Models: Use putty knife to gently peel off name
plate from door and reapply over old handle holes.
TO ATTACH FREEZER HANDLE:
1. Start with handle offset away from door. Place top of handle over dovetail
button, swing handle into an upright position and pull downward, locking it
into place.
2. Secure bottom of handle with two screws removed earlier.
Self Adhesive
Nameplate Nam
LockHandle
over
Dovetail Button
TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)
In some models, the refrigerator door has a full length trim piece which continues from the bottom of the handle to the
bottom of the door. The top of the trim fits around the base of the handle. An adhesive "trim lock" is positioned about
halfway down. The bottom of the trim is held in place by either an adhesive trim lock, or a trim lock with two prongs inserted
into a hole on the face of the door.
TO REMOVE TRIM:
1. Remove trim by gently pulling trim lock areas out and away from door.
2. When trim is free from door, slide the trim straight down and away from base of handle.
NOTE: For models with short handle trim, remove bYsliding trim straight down and off of handle bracket.
TO REMOVE REFRIGERATOR HANDLE:
(Handles may be easier to reverse while doors are off.)
1. Remove two screws attaching handle to top of refrigerator door.
2. Swing top of handle away from door and slide handle down and off of
dovetail button.
3. Remove screw and dovetail button and install on other side, moving
hole plugs from corresponding holes to opposite side.
TO ATTACH REFRIGERATOR HANDLE:
1. Start with handle offset away from door. Place bottom of handle over
dovetail button, swing handle into an upright position and pull upward,
locking it into place.
2. Secure top of handle with screws.
TO ATTACH TRIM:
1. Slide both trim locks out of trim.
2. Insert new adhesive trim locks contained in your literature pack.
NOTE: Trim lock must be removed and installed by sliding over the two
donut shaped areas.
3. Install trim to handle by sliding under base of handle. Carefully align
trim and press down at trim lock locations.
4. Use rubbing alcohol to remove any adhesive residue from old trim
lock locations.
I¸
fLockHandle
over
Dovetail
-Button
Adhesive
Full

Freezer Light
Ice Bucket
Freezer
Control
Retrlgerator
Control
Dell Drawer
Covet
Dell Drawer
Half Shelf
Wine Rack
Special Item
Full Shelf
Crisper
Drawers
I
_Toe Grille
Fixed Door Bin
Door Rack
Dairy Door
Tall Bottle
Retainer
Snugger
Door Bin
Fixed Door Sin
Door Rack
Features may vary according to model
8

COOL DOWNPERIOD
To ensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8 to 12 hours before loading
it with food.
REFRIGERATOR &FREEZER CONTROLS
NOTE: When first setting the controls or when changing a setting, wait 24 hours for the temperature to stabilize before
making additional changes.
TEMPERATURE ADJUSTMENT
NOTE: When first turning refrigerator onl move refrigerator
cold control to V which is the recommended initial
setting. After 24 hours, adjust the controls as needed.
Adjust temperature gradually: move the knob in small
increments, allowing the temperature to stabilize,
For colder temperatures, turn the knob towards Cold.
For warmer temperatures, turn the knob towards Warm.
Recommended
setting
Freezer Control ,some models_
Turning the refrigerator control willchange temperatures in both
compartments. For example, ifthe refrigerator control isturned
to a colder setting, the freezer control may have to be adjusted
to a warmer setting. Turning the freezer control will change
only the freezer temperature.
To maintain temperatures, a fan circulates air in the refrigerator
and freezer compartments. For good circulation, do not block
cold air vents with food items.
/
/
Refrigerator Control ,some mode]s_
/
QJ
IMPORTANT: Turning
the refrigerator tem3-
erature control to "0"
turns off the com-
pressor, but does not
disconnect the power to
the light bulb and other
electrical components
Refrigerator & Freezer Control (some models)
TEMPERATURE ADJUSTMENT GUIDE
If Refrigerator compartment Is Too Warm Turn Refrigerator Control Slightly Towards Cold.
If Refrigerator compartment Is Too Cold Turn Refrigerator Control Slightly Towards Warm.
If Freezer compartment Is Too Warm Turn Freezer Control Slightly Towards Colder.
If Freezer compartment Is Too Cold Turn Freezer Control Slightly Towards Warmer.
To Turn Refrigerator Off Turn Refrigerator Control To 0.

To avoid personal injury or property
damage, handle tempered glass shelves carefully.
Shelves may break suddenly ifnicked, scratched, or
exPosed to sudden temperatu re change.
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual
needs. Before adjusting the shelves, remove all food.
To adjust sliding shelves:
Remove shelf by pulling forward to stop position.
Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this
procedure.
Sliding Wire Shelf
Sliding Glass Shelf
To adjust cantilever shelves:
NOTE: Cantilever shelves are Supported at the back of
the refrigerator. Cantilever shelves are available in either
glass or wire.
0 Lift front edge up.
O Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf
into the wall bracket. Lower the shelf into the desired slots
and lock into position.
SpillFree TM glass shelves (some models) catch and hold
accidental spills. In some models, the SpillFree TM shelves
slide out for easy access to food and for fast cleaning. The
shelves slide out independently of the cantilever brackets.
Just pull the front of the shelf forward. The shelf can be
extended as far as the stopper will allow but it is not removable
from the cantilever bracket.
Cantilever Fixed Glass Shelf
DOOR STORAGE
Door bins, shelves, and racks are provided for convenient
storage of jars, bottles, and cans. Frequently used items
can be quickly selected.
Some models have door racks or bins that can accommodate
gallon-sized plastic drink containers and economy-sized jars
and containers. Some racks are adjustable for maximum
storage capacity.
The dairy compartment, which is warmer than the general
food storage section, is intended for short term storage of
cheese, spreads, or butter.
Door Rack
10

ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be moved
to suit individual needs.
Tomove door bins
1. Lift bin straight up.
2. Remove bin.
3. Place bin in desired position.
4. Lower bin onto supports until locked in place.
CRISPERS (SOME MODELS)
The crispers, located under the bottom refrigerator shelf,
are designed for storing fruits, vegetables, and other fresh
produce. Wash items in clear water and remove excess water
before placing them in the crispers. Items with strong odors
or high moisture content should be wrapped before storing.
Crisper Drawer
Adjustable Door Bin
DELl DRAWER (SOME MODELS)
Some models are equipped with a Dell Drawer for storage of
luncheon meats, spreads, cheeses, and other dell items.
Deli Drawer
HUMIDITY CONTROL (SOME MODELS)
The Humidity Control, present on some models with crisper
drawers, allows you to adjust the humidity within the crisper.
This can extend the life of fresh vegetables that keep best
in high humidity.
NOTE: Leafy vegetables keep best when stored with the
Humidity Control set on High Humidity, or in a drawer
without a Humidity Control. This keeps incoming air to a
minimum and maintains maximum moisture content.
Low
Humidity_
Crisper Humidity Control
11

Ice Service
If your refrigerator has an automatic ice maker, t will orovide a sufficient
supply of ice for normal use. During the nitial startap of your refrigerator.
however, no ice will be produced during the first 24 hours ofoperation. Automatic
ice makers are also optional accessories that may be installed in most models
at any time. Call your local dealer for information.
TURNING YOUR ICE MAKER ON
After the plumbing connections have been completed, the water supply valve
must be opened. Place the ice container under the ice maker, pushing itas far
back as possible. Lower the wire signal arm to its "down" or ON position. New
plumbing connections may cause the first production of ice cubes to be
discolored or have an odd flavor. These first cubes should be discarded until
the cubes produced are free of discoloration and taste.
TURNING YOUR ICE MAKER OFF
To stop the ice maker, lift the wire signal arm until it clicks and locks in the
"up" or OFF position. The ice maker also tums off automatically when the ice
container isfull. If your model has an adjustable freezer shelf, place the shelf
in the lower position, so that the wire signal arm will hit the ice when the
container is full.
Ice Maker
Chemicals from a malfunctioning softener can damage the ice maker. If the icemaker is connected
to soft water, ensure that the softener is maintained and working properly.
ICE MAKER TIPS
Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is
in its "down" or ON position. The ice maker will then produce more ice.
Occasionally shake the ice container to keep ice separated.
Keep the wire signal arm in its "up" or OFF position until the refrigerator is connected to the water supply or whenever
the water supply is turned off.
The following sounds are normal when the ice maker is operating:
Motor running
Ice loosening from tray
Ice dropping into ice container
Running water
Water valve opening or closing
NOTE: E0r m0re information on these 0pe[ations, see Normal Operating Sounds and Sights section on Page i 4.
Do Not place the ice container in your dishwasher_
Wash the ice container in warm water with mild detergent. Rinse well and dry.
Stop the ice maker when cleaning the freezer and during vacations.
If the ice maker will be turned off for a long period of time, turn the water supply valve to the closed position.
12

Food Storage&Energy Saving Ideas
FOOD STORAGE IDEAS
Fresh Food Storage
The fresh food compartment should be kept between 34° Fand 40 ° F with an optimum temperature of 37 ° F.
Avoid overcrowding the refrigerator shelves. This reduces the circulation of air around the food and results in uneven
cooling.
Fruits and Vegetables
Storage inthe crisper drawers traps moisture to help preserve the fruit and vegetable quality for longertime periods.
Meat
Raw meat and poultry should be wrapped securely so leakage and contamination of other foods or surfaces does not
Occur.
Frozen Food Storage
The freezer compartment should be kept at 0° F or lower.
A freezer operates most efficiently when it is at least 2/3 full.
Packaging Foods for Freezing
To minimize dehyd ration and quality deterioration, use aluminum foil, freezer wrap, freezer bags or airtight containers.
Force as much air out of the packages as possible and seal them tightly. Trapped air can cause food to dry out,
change color, and develop an off-flavor (freezer burn).
Wrap fresh meats and poultry with suitable freezer wrap prior to freezing.
Do not refreeze meat that has completely thawed.
Loading the Freezer
Avoid adding too much warm food to the freezer at one time. This overloads the freezer, slows the rate of freezing,
and can raise the temperature of frozen foods.
Leave a space between the packages, so cold air can circulate freely, allowing food to freeze as quickly as possible.
Avoid storing hard-to-freeze foods such as ice cream and orange juice on the freezer door shelves. These foods are
best stored in the freezer interior where the temperature varies less.
ENERGY SAVING IDEAS
Locate the refrigerator in the coolest part of the room, out of direct sunlight,
and away from heating ducts or registers. Do not place the refrigerator
next to heat-producing appliances such as a range, oven, or dishwasher.
If this is not possible, a section of cabinetry or an added layer of insulation
between the two appliances will help the refrigerator operate more
efficiently.
Level the refrigerator so that the doors close tightly.
• Refer to this Use & Care Manual for the suggested temperature control
settings.
Periodic cleaning of the condenser will help the refrigerator run more
efficiently. See the Care and Cleaning Chart on page 15.
Do not overcrowd the refrigerator or block cold air vents. Doing so causes
the refrigerator to run longer and use more energy.
Cover foods and wipe containers dry before placing them in the
refrigerator. This cuts down on moisture build-up inside the unit.
Organize the refrigerator to reduce door openings. Remove as many
items as needed at one time and close the door as soon as possible.
13

UNDERSTANDING THE SOUNDS YOU MAY HEAR A.
Your new high-efficiency refrigerator may make unfamiliar
sounds. Don't be alarmed, these are all normal sounds. Hard
surfaces, such as vinyl or wood floors, walls, and kitchen
cabinets may make sounds more noticeable. Listed below
are descriptions of some of the most common sounds you
may hear, and what is causing them.
NOTE: Rigid foam insulation is Very energy efficient,
but is not a sound insulator.
Evaporator
The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.
B. Evaporator Fan
You may hear air being forced through the refrigerator
by the evaporator fan.
C. Defrost Heater
During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.
IMPORTANT: During the automatic defrost cycle, you
may notice a red glow in the vents on the back wall of
your freezer compartment: This is norma! during the
defrost cycle.
D. Automatic Ice Maker
If your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin.
E. Cold Control & Defrost Timer
These parts can produce a snapping or clicking sound
when turning the refrigerator on and off. The timer also
produces sounds similar to an electric clock.
F. Condenser Fan
If condenser coils are located underneath your
refrigerator as shown in the drawing at the left, you
have a condenser fan. You may hear air being forced
through the condenser by the condenser fan.
G. Compressor
Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.
H. Water Valve
If your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water valve
opens to fill the ice maker during each cycle.
L Drain Pan (Nonremovable)
You may hear water running into the drain pan during
the defrost cycle. The drain pan will be located on top
of the compressor for air-cooled condensers (black coils
on back of refrigerator).
J. Condenser Coils (Fan-cooled models only)
14

Keepyourrefrigeratorandfreezercleantopreventodorbuild-up.Wipeupanyspillsimmediatelyandcleanbothsectionsat
leasttwiceayear.Neverusemetallicscouringpads,brushes,abrasivecleanersorstrongalkalinesolutionsonany
surface.Do not wash any removable parts in a dishwasher. Always unplug the electricalpower cord from the wall
outlet before cleaning.
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may
tear or gouge the floor covering. Ifthe refrigerator has an automatic ice maker, be careful not to move the
refrigerator beyond the plumbing connections.
Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or dam phands.
•To avoid damage and help the refrigerator run as efficiently as possible, clean the condenser periodically.
NOTES:
Turning the refrigerator temperature control to "O"turns off the compressor, but does not disconnect electrical
power to the light bulb or other electrical components.
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing
adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild
detergent, or. touch the glue residue with the sticky side of tape you have already removed. Do not remove the
serial plate.
Part
Interior/Door
Liner
Door Gaskets
Drawers/Bins
Glass Shelves
Toe Grille
Exterior and
Handles
Exterior and
Handles
(Stainless Steel
Models Only)
Condenser
Coils
(Fan-cooled
models only)
Condenser
Coils
(Air-cooled
models only)
Care & Cleaning Chart
What To Use
Soap and water
Baking soda and water
Soap and water
Soap and water
Soap and water
Glass cleaner
Mild liquid sprays
Soap and water
Mild liquid sprays
Vacuum attachment
Soap and water
Soap and water
Ammonia
Stainless Steel Cleaners
Condenser Cleaning
Brush is available from
your dealer.
Vacuum Cleaner
Vacuum Cleaner
Tips and Precautions
Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring
excess water out of sponge or cloth before cleaning around controls,
light bulb or any electrical part.
Wipe gaskets with a clean soft cloth.
Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Allow glass to warm to room temperature before immersing in warm water.
Vacuum dust from front of toe grille. Remove toe grille (See illustration on
page 4). Vacuum backside and wipe with sudsy cloth or sponge. Rinse and
dry.
Do not use commercial household cleaners, ammonia, or alcohol to clean
handles.
Clean stainless steel front and handles with non-abrasive soapy water and a
dishcloth. Rinse with clean water and a soft cloth. Wipe stubborn spots with an
ammonia-soaked paper towel, and rinse. Use a non-abrasive stainless steel
cleaner. These cleaners can be purchased at most home improvement or
major department stores. Always follow manufacturer's instructions.
NOTE: Always clean, wipe and dry with the grain to prevent cross-grain
scratching. Wash the rest of the cabinet with warm water and mild liquid
detergent. Rinse well, and wipe dry with a clean soft cloth.
No need to clean unless operating refrigerator under particularly dusty or
greasy conditions, or if there is significant pet traffic in your home. If cleaning
is necessary, remove toe grille and use extended vacuum attachment and
condenser cleaning brush to remove dust build-up from condenser coils (see
item "J" in illustration on page 17 for location).
Use the dusting tool attachment on your vacuum to remove dust build-up on
the condenser coils (black tubes and wires) attached to the back of air-cooled
refrigerators only.
Defrost Water Soap and water Some models have defrost water pan located on top of compressor at bottom
Pan rear of refrigerator (see illustration on next page). Wipe water pan with damp
cloth. NOTE: The defrost water pan is NOT removable.
15

NEVER CLEAN CONDENSER (SOME MODELS)
Ifyour refrigerator isequipped with a Never Clean condenser,
there's no need to cleanthe condenser under normal operating
conditions. If the refrigerator is operated under particularly
dusty or greasy conditions, or ifthere issignificant pet traffic
inyour home, itmay be necessary to periodically clean the
condenser for maximum efficiency.
rl_=_11_T_'_IAv0id cuts when replacing light bulbs,
wear gloves.
REPLACING THE FREEZER LIGHT BULB
(SOMEMODELS)
1. Unplug refrigerator.
2. Wear gloves as protection against possible broken
glass.
3. Unsnap light shield as shown.
4. Unscrew and replace old bulb with an appliance bulb
of the same wattage.
5. Replace light shield.
6Remember _oplug the refrigerator backir
\
Defrost Water Pan (some models)
/L/j
\\
Vacation and Moving Tips
• Leave refrigerator operating during vacations of 3 weeks or less.
Short • Use all perishable items from refrigerator compartment.
Vacations •Turn automatic ice maker off, even ifyou will only be gone for a few days.
•Remove all food and ice if you willbe gone one month or more.
• Turn controls to "0" and disconnect power.
Long • Turn off automatic ice maker and turn water supply valve to closed position.
Vacations • Clean interior thoroughly.
• Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
• Remove all food and ice.
• If using handcart, load from side.
Moving • Adjust rollers all the way up to protect them during sliding or moving.
• Pad cabinet to avoid scratching surface.
16

GIBSON REFRIGERATOR PLATINUM ADVANTAGE WARRANTY
Your Gibson product is )rotected by this warranty (United States)
WARRANTY THROUGHOURAUTHORIZEDSERVICERS, THECONSUMERWILLBE RESPONSIBLEFOR;
PERIOD WEWILL:
FULLTWO-YEAR Twoyearsfrom Pay allcostsfor repairing or replacing any parts ofthis Costs of service calls that are listed under NORMAL
WARRANTY odgtsal purchase date appliancewhichprove to be defectivein materialsor RESPONSIBILITIESOFTHECONSUMER,*
workmanship Excludes origtsal and replacement Ice
& Waterfilter cartridges (if equipped) Original and
replacement cartridges are warrantedfor 30 days
(parts only)
LIMITED 3*%5 r_ Third through fifth Repairor replace any parts inthe Sealed Travelcostsofthetechnician,diagnostic costsand anyremoval,
YEARWARRANTY yearsfromoriginal Refrigeration System (compressor, condenser, transportationand reinstallationcostswhichare reqtsred
(Sealed System) purchasedate evaporator,drierandtubing) whichprovetobe becauseof service Costsforlabor, partsandtransportation
defectiveinmaterialsor workmanship otherthanwith respect to theSealedRefrigeration System
LIMITED 6_-10 TM Sixth through tenth Providea replacement for anycompressorwhich Diagnostic costsandanyremoval,transportation and
YEARWARRANTY yearsfromoriginal provesto bedefectiveinmaterialsor workmanship reinstallaboncostswhichare required becauseof service Costs
(Compressor only) purchasedate for labor,partsandtransportation otherthanthe costofthe
replacement compressoritself
LIMITED Time pertsds listed Alloftheprovisions ofthe fullandlimitedwarranties Costsofthetechnician'straveltothe homeandanycostsfor
WARRANTY above aboveandtheexclusionslistedbelowapply pickupanddelivel_ oftheappliance required becauseof
(Applicable tothe servtse
StateofAlaska)
Your appliance is warranted by Electrolux Home Products North America, a division of White Consolidated Industries Inc. We authorize no person
to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by us
or an authorized Electrolux Home Products North America servicer.
*NORMAL
RESPONSIBILITIES
OF THE CONSUMER
EXCLUSIONS
IF YOU NEED
SERVICE
This warranty applies only to products in ordinary household use, and the consumer is responsible for the
items listed below:
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in
accordance with all local plumbing, electdcal and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose
connections or defects in house widng.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc.,
which are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs aod/or fluorescent tubes (on models with these features).
This warranty does not cover the following:
1. CONSEQUENTIAL OR iNCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or materiaI, or for appliances not in
ordinary household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by servicers other than Electrolux Home Products North America or
its authorized servicers; use of parts other than genuine Electrolux Home Products pads; obtained from persons
other than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.
4. Products with odginal serial numbers that have been removed or altered and cannot be readily determined.
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the
warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all
receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to
state. Service under this warranty must be obtained by contacting EIectrolux Home Products:
This warranty only applies in the 50 states of the U.S.A., and Puerto Rico. Product features or specifications as described or illustrated are subject
to change without notice. All warranties are made by Electrolux Home Products North America, a division of White Consolidated Industries Inc.
01-G-RE-02 (Rev. 01/2001)
USA
800°944°9044
Electrolux Home P_ducts North America
P.O. Box212378
Augusta, GA 30917
17

Warranty lnformation
REFRIGERATOR WARRANTY (CANADA)
Your refrigerator is protected by this warranty
WARRANTY THROUGHOURAUTHORIZEDSERVICERS, THECONSUMERWILLBERESPONSIBLEFOR:
PERIOD WEWILL:
FULLONE-YEAR Or_eyearfrombeginaI Payallcosts for repairingorreplacinganypartsofthis Costs of service calls that are listed under NORMAL
WARRANTY purchasedate appliancewhichprove to be defectivein materialsor RESPONSIBILITIESOFTHE CONSUMER,*
workmanship Excludesoriginal andreplacementIce
& Waterfilter cartridges(if equipped) Originaland
replacement cartridges are warranted for 30 days
(pads only)
LIMITED2NO'5TH Secondthroughfifth Repairor replaceanypartsinthe cabinetlineror Costsforpickupand deliveryoftheappliancerequiredbecause
YEARWARRANTY yearsfromoriginal SealedRefrigerationSystem(compressor,condenser, ofservice Costsforlabor,partsandtransportationotherthan
(Cabinet Liner and purchasedate evaporator,drierandtubing)whichprovetobe withrespectto thecabinetlineror SealedRefrigerationSystem
SealedSystem) defectiveinmatedalsorworkmanship
Your appliance is warranted by Electrolux Home Products North Amedca, a division of WCI Canada Inc. We authorize no person to change or add
to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by us or an authedzed
Electrolux Home Pr_oductsNorth America servicer.
*NORMAL
RESPONSIBILITIES
OFTHECONSUMER
EXCLUSIONS
IFYOUNEED
SERVICE
This warranty applies only to products in ordinary household use, and the consumer is responsible for the
items listed below:
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in
accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose
connections or defects in house wibeg.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,etc.,
which are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).
This warranty does not cover the following:
1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in
ordinary household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by servicers other than Electrolux Home Products North America or
its authorized servicers; use of parts other than genuine Electrolux Home Products pads; obtained from persons
other than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be readily determined.
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the
warranty period should service be required, ff service is performed, it is in your best interest to obtain and keep all
Your appliance is warranted by Electrolux Home Products North America, a division of WC! Canada Inc. Product features or specifications as
described or iIlustrated are subject to change without notice.
Canada
866o213°9397
Electrolux Home Products North America
6150 McLaughlin Road
Mississauga, Ontario
L5R 4C2
18

ATTENTION
See
To Properly Install Your Refrigerator
See "'Installation" Section On Pages 4-5
OR
To Reverse The Doors
"'Door Removal & Reversal" Section On Pages 6-7
Common Before calling for service, review this list. It may save you time and
expense. This list includes common occurrences that are not the result of
Occurrences defective workmanship or materials in this appliance.
*Ensure plug is tightly pushed into electrical outlet.
*Check/replace fuse with a 15 amp time-delay fuse. Reset circuit
Refrigerator does not run. breaker.
*The temperature control is turned to OFF.
*Refrigerator may be in defrost cycle. Wait 20 minutes and check again.
Freezer temperature too cold. *Set freezer control to a warmer setting until freezer temperature is
Refrigerator temperature is satisfactory. Allow 24 hours for the temperature to stabilize.
satisfactory.
Refrigerator temperaturetoo cold. *Set refrigerator control to a warmer setting. Allow 24 hours for
Freezer temperature is temperature to stabilize. Then check freezer temperatures and adjust
satisfactory, as needed.
*The cabinet is not level.
*Refrigerator is noisy or vibrates. *Floor is weak.
*Interior needs to be cleaned.
Odors in refrigerator. *Foods that produce odors should be covered or wrapped.
.Replace light bulb.
.Ensure plug is tightly pushed into electrical outlet.
Cabinet light not working. .Light switch may be stuck. Push in light switch, located on the
refrigerator control box, to release.
.Ensure the Wire Signal Arm is not in UP position.
.Ice maker should produce 4 to 5 pounds of ice in a 24 hour period.
Automatic ice maker not working, .Water supply is turned off.
(some models) .Water pressure is too low.
.The freezer is not cold enough.
*See Normal Operating Sounds and Sights section on page 14.
19

Gibson
erador
Con congelador horizontal
Visite la p,;gina de
Frigidaire en Internet:
http:liwww.frigidaire.co m
Bienvenido .................... 22
Instrucciones I_1
de seguridad ................. 23
Instalaci6n -- InOuye'aconexldn del
fabricador de hielo al suministro
deagua...................... 24 -25
Extracci6n e inversi6n L_
/
de puertas ............... 26 -27
Caracter{sticas a la vista .... 28
Controles de temperatura,, ,29
Vista interior ............ 30 -31 U
_Jm
Fabricaci6n de hielo ......... 32 U
Almacenamiento de alimentos
y consejos para el ahorro L]
de energ{a .................... 33
Sonidos que indican
funcionamiento normal ..... 34
Cuidado y limpieza ..... 35 -36 iml
Garant{a ...................... 37
Antes de Ilamar al
servicio t6cnico .............. 38
LEA Y GUARDE ESTAS INSTRUCCIONES