Gigabyte GA-EG41M-S2 User manual

GA-EG41M-S2H/
GA-EG41M-S2
LGA775 socket motherboard for Intel®CoreTM processor family/
Intel®Pentium®processor family/Intel®Celeron®processor family
User's Manual
Rev.1002
12ME-EG41MS2H-1002R

Motherboard
Oct. 20, 2008
GA-EG41M-S2H/ GA-EG41M-S2
Oct. 20, 2008
Motherboard
GA-EG41M-S2H/GA-EG41M-S2

Copyright
©2008 GIGA-BYTE TECHNOLOGY CO., LTD.All rights reserved.
Thetrademarksmentionedinthismanualarelegallyregisteredtotheirrespectiveowners.
Disclaimer
Informationinthis manualisprotected bycopyrightlaws andistheproperty ofGIGABYTE.
ChangestothespecificationsandfeaturesinthismanualmaybemadebyGIGABYTEwithoutprior
notice. Nopartofthismanualmaybereproduced,copied,translated,transmitted,orpublishedinany
formorbyanymeanswithoutGIGABYTE'spriorwrittenpermission.
Documentation Classifications
Inordertoassistintheuseofthisproduct,GIGABYTEprovidesthefollowingtypesofdocumentations:
Forquickset-upoftheproduct,readtheQuickInstallationGuideincludedwiththeproduct.
Fordetailedproductinformation,carefullyreadtheUser'sManual.
For instructions on how to use GIGABYTE's unique features, read or download the
informationon/fromtheSupport\Motherboard\TechnologyGuidepageonourwebsite.
Forproduct-relatedinformation,checkonourwebsiteat:
http://www.gigabyte.com.tw
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"
means the revision of the motherboard is 1.0. Check your motherboard revision before updating
motherboardBIOS,drivers,orwhenlookingfortechnicalinformation.
Example:

- 4 -
Table of Contents
BoxContents ................................................................................................................. 6
OptionalItems................................................................................................................. 6
GA-EG41M-S2H/S2MotherboardLayout...................................................................... 7
BlockDiagram................................................................................................................ 8
Chapter 1 HardwareInstallation .................................................................................... 9
1-1 InstallationPrecautions ..................................................................................... 9
1-2 ProductSpecifications .................................................................................... 10
1-3 Installing the CPU and CPU Cooler.............................................................. 13
1-3-1 Installing the CPU ................................................................................................ 13
1-3-2 Installing the CPU Cooler ................................................................................... 15
1-4 InstallingtheMemory ..................................................................................... 16
1-4-1 Dual Channel Memory Configuration................................................................ 16
1-4-2 Installing a Memory............................................................................................. 17
1-5 Installing anExpansionCard ......................................................................... 18
1-6 Back PanelConnectors ................................................................................. 21
1-7 InternalConnectors ........................................................................................ 23
Chapter 2 BIOSSetup................................................................................................. 35
2-1 StartupScreen................................................................................................ 36
2-2 TheMainMenu .............................................................................................. 37
2-3 MBIntelligentTweaker(M.I.T.) ....................................................................... 39
2-4 Standard CMOSFeatures ............................................................................. 46
2-5 Advanced BIOS Features.............................................................................. 48
2-6 AdvancedChipsetFeatures ........................................................................... 50
2-7 IntegratedPeripherals ..................................................................................... 52
2-8 PowerManagementSetup ............................................................................. 55
2-9 PnP/PCIConfigurations................................................................................. 57
2-10 PC Health Status ........................................................................................... 58
2-11 LoadFail-SafeDefaults................................................................................... 59
2-12 LoadOptimizedDefaults ................................................................................. 59
2-13 Set Supervisor/User Password..................................................................... 60
2-14 Save & Exit Setup......................................................................................... 61
2-15 ExitWithoutSaving ....................................................................................... 61

- 5 -
Chapter 3 DriversInstallation ...................................................................................... 63
3-1 InstallingChipsetDrivers ............................................................................... 63
3-2 ApplicationSoftware....................................................................................... 64
3-3 TechnicalManuals.......................................................................................... 64
3-4 Contact........................................................................................................... 65
3-5 System........................................................................................................... 65
3-6 DownloadCenter............................................................................................ 66
Chapter 4 UniqueFeatures......................................................................................... 67
4-1 XpressRecovery2 ......................................................................................... 67
4-2 BIOS Update Utilities..................................................................................... 72
4-2-1 Updating the BIOS with the Q-Flash Utility...................................................... 72
4-2-2 Updating the BIOS with the @BIOS Utility ....................................................... 75
4-3 EasyTune6.................................................................................................... 76
4-4 Dynamic Energy SaverAdvanced ................................................................ 77
4-5 Q-Share ......................................................................................................... 79
4-6 TimeRepair .................................................................................................... 80
Chapter 5 Appendix .................................................................................................... 81
5-1 ConfiguringAudioInputandOutput................................................................. 81
5-1-1 Configuring 2/4/5.1/7.1-Channel Audio ............................................................ 81
5-1-2 Installing the S/PDIF In Cable (Optional)........................................................... 83
5-1-3 Configuring Microphone Recording ................................................................... 84
5-1-4 Using the Sound Recorder................................................................................. 86
5-2 Troubleshooting............................................................................................... 87
5-2-1 Frequently Asked Questions ............................................................................. 87
5-2-2 Troubleshooting Procedure ................................................................................ 88
5-3 RegulatoryStatements ................................................................................... 90

- 6 -
•Theboxcontentsaboveare for reference only andtheactualitemsshalldepend on product package youobtain.
Thebox contentsare subject tochange withoutnotice.
•Themotherboardimageisforreferenceonly.
Box Contents
GA-EG41M-S2H or GA-EG41M-S2 motherboard
Motherboarddriverdisk
User'sManual
QuickInstallationGuide
OneIDEcableandone floppy disk drive cable
Two SATA3Gb/scables
I/O Shield
Optional Items
2-portUSB2.0bracket (Part No. 12CR1-1UB030-51R)
2-portSATApower cable (PartNo.12CF1-2SERPW-01R)
S/PDIF in cable (Part No. 12CR1-1SPDIN-01R)
COM port cable (Part No. 12CF1-1CM001-32R)

- 7 -
GA-EG41M-S2H/S2 Motherboard Layout
* Only for GA-EG41M-S2H.
KB_USB
LGA775
ATX
GA-EG41M-S2H/S2
USB LAN
F_AUDIO
AUDIO
PCIEX4
IT8718
IDE
DDR2_1
ATX_12V
R_USB
CPU_FAN
Intel®G41
DDR2_2
CI
F_PANEL
PHASELED
SATA2_0
Intel®ICH7 PWR_LED
CLR_CMOS
M_BIOS
CD_IN
PCI1
BATTERY
RTL 8110SC
PCI2
SYS_FAN
B_BIOS
OPTICAL
DVI VGA
PCI3
SiI1392*
SPDIF_I COMA FDD F_USB1 F_USB2
SATA2_1
SATA2_2
SATA2_3
Level Shifter
HDMI*
CODEC
SPDIF_O

- 8 -
Block Diagram
Dual BIOS
CPU CLK+/-
(333/266/200 MHz)
LGA775
Processor
Intel®G41
LPC BUS
Line-Out
MIC
CODEC
Line-In
SPDIF In
SPDIF Out
Side Speaker Out
Center/Subwoofer Speaker Out
Surround Speaker Out
3 PCI
PCI Bus Floppy
COM Port
Host
Interface
DDR2 800/667 MHz
PCI Express Bus
1 PCI Express x16
x4
GMCH CLK
(333/266/200 MHz)
D-Sub
Level
Shifter
PS/2 KB/Mouse
IT8718
4 SATA 3Gb/s
8 USB Ports
Intel®ICH7
DVI-D
RJ45
RTL
8110SC
LAN
HDMI* SiI1392*
Dual Channel Memory
* Only for GA-EG41M-S2H.

Hardware Installation- 9 -
1-1 Installation Precautions
Themotherboardcontainsnumerousdelicateelectroniccircuitsandcomponentswhichcanbecome
damagedasaresult of electrostatic discharge (ESD).Priortoinstallation,carefully read the user's
manualandfollowtheseprocedures:
•Priortoinstallation,donotremoveorbreakmotherboardS/N(SerialNumber)stickeror
warrantystickerprovidedbyyourdealer.Thesestickersarerequiredforwarrantyvalidation.
•AlwaysremovetheACpowerby unpluggingthepower cordfromthe poweroutletbefore
installingorremovingthemotherboardorotherhardwarecomponents.
•Whenconnectinghardwarecomponentstotheinternalconnectorsonthemotherboard,
makesuretheyareconnectedtightlyandsecurely.
•Whenhandlingthemotherboard,avoidtouchinganymetalleadsorconnectors.
•Itisbesttowearanelectrostaticdischarge(ESD)wriststrapwhenhandlingelectronic
componentssuchasamotherboard,CPUormemory.IfyoudonothaveanESDwriststrap,
keepyourhandsdryandfirsttouchametalobjecttoeliminatestaticelectricity.
•Priortoinstallingthemotherboard,pleasehaveitontopofanantistaticpadorwithinan
electrostaticshieldingcontainer.
•Beforeunpluggingthepowersupplycablefromthemotherboard,makesurethepowersupply
hasbeenturnedoff.
•Beforeturningonthepower,makesurethepowersupplyvoltagehasbeensetaccordingto
thelocalvoltagestandard.
•Beforeusingtheproduct,pleaseverifythatallcablesandpowerconnectorsofyourhardware
componentsareconnected.
•Topreventdamagetothemotherboard,donotallowscrewstocomeincontactwiththe
motherboardcircuitoritscomponents.
•Makesuretherearenoleftoverscrewsormetalcomponentsplacedonthemotherboardor
withinthecomputercasing.
•Donotplacethecomputersystemonanunevensurface
.
•Donotplacethecomputersysteminahigh-temperatureenvironment.
•Turningonthecomputerpowerduringtheinstallationprocesscanleadtodamagetosystem
componentsaswell asphysicalharm totheuser.
•Ifyouareuncertainaboutanyinstallationstepsorhaveaproblemrelatedtotheuseofthe
product,pleaseconsultacertifiedcomputertechnician.
Chapter 1 Hardware Installation

GA-EG41M-S2H/S2 Motherboard - 10 -
1-2 Product Specifications
CPU Support for an Intel®CoreTM 2 Extreme processor/
Intel®CoreTM 2 Quad processor/Intel®CoreTM 2 Duo processor/
Intel®Pentium®Dual-Core processo/Intel®Celeron®processor
in the LGA 775 package
(Go to GIGABYTE's website for the latest CPU support list.)
L2 cache varies with CPU
Front Side Bus 1333/1066/800 MHz FSB
Chipset North Bridge: Intel®G41 Chipset
South Bridge: Intel®ICH7
Memory 2 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory(Note 1)
Dual channel memory architecture
Support for DDR2 800/667 MHzmemory modules
(Go to GIGABYTE's website for the latest memory support list.)
Onboard Graphics North Bridge:
- 1 x D-Sub port
- 1 x DVI-D port(Note 2)
SiI1392 chip*:
- 1 x HDMI port*
Audio Realtek ALC888 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF In/Out
Support for CD In
LAN Realtek 8110SC chip (10/100/1000 Mbit)
Expansion Slots 1 x PCI Express x16 slot, running at x4
(Refer to page 19 for the graphics cards support list.)
3 x PCI slots
Storage Interface South Bridge:
- 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
- 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
iTE IT8718 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB Integrated in the South Bridge
Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets
connected to the internal USB headers)
* Only for GA-EG41M-S2H.

Hardware Installation- 11 -
Internal Connectors 1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x floppy disk drive connector
1 x IDE connector
4 x SATA 3Gb/s connectors
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x CD In connector
1 x S/PDIF In header
1 x S/PDIF Out header
2 x USB 2.0/1.1 headers
1 x serial port header
1 x power LED header
1 x chassis intrusion header
Back Panel 1 x PS/2 keyboard port
Connectors 1 x PS/2 mouse port
1 x D-Sub port
1 x DVI-D port(Note 2)
1 x HDMI port*
1 x optical S/PDIF Out connector
4 x USB 2.0/1.1 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side
Speaker Out/Line In/Line Out/Microphone)
I/O Controller iTE IT8718 chip
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU overheating warning
CPU/System fan fail warning
CPU/System fan speed control(Note 3)
* Only for GA-EG41M-S2H.

GA-EG41M-S2H/S2 Motherboard - 12 -
BIOS 2 x 8 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOSTM
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features Support for @BIOS
Support for Q-Flash
Support for Virtual Dual BIOS
Support for Download Center
Support for Xpress Install
Support for Xpress Recovery2
Support for EasyTune(Note 4)
Support for Dynamic Energy Saver Advanced
Support for Time Repair
Support for Q-Share
Bundled Software Norton Internet Security (OEM version)
Operating System Support for Microsoft®Windows®Vista/XP
Form Factor Micro ATX Form Factor; 24.4cm x 20.7cm
(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) The DVI-D port does not support D-Sub connection by adapter.
(Note 3) Whether the CPU/System fan speed control function is supported will depend on the CPU/
System cooler you install.
(Note 4) Available functions in EasyTune may differ by motherboard model.

Hardware Installation- 13 -
NotchNotch
AlignmentKey
AlignmentKey
LGA775CPU
LGA775CPUSocket
Pin One Corner of the CPU Socket
Triangle Pin One Marking on the CPU
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
•Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
•Always turn off the computer and unplug the power cord from the power outlet before
installing the CPU to prevent hardware damage.
•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you
may locate the notches on both sides of the CPU and alignment keys on the CPU socket.)
•Apply an even and thin layer of thermal grease on the surface of the CPU.
•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and
damage of the CPU may occur.
•Set the CPU host frequency in accordance with the CPU specifications. It is not recom-
mended that the system bus frequency be set beyond hardware specifications since it
does not meet the standard requirements for the peripherals. If you wish to set the fre-
quency beyond the standard specifications, please do so according to your hardware
specifications including the CPU, graphics card, memory, hard drive, etc.
1-3-1 Installing the CPU
A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

GA-EG41M-S2H/S2 Motherboard - 14 -
B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.
Before installing the CPU, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the CPU.
Step 1:
Completely raise the CPU socket lever.
CPU Socket Lever
Step 3:
Remove the protective socket cover from the
load plate. (To protect the CPU socket, always
replace the protective socket cover when the
CPU is not installed.)
Step 5:
Once the CPU is properly inserted, replace
the load plate and push the CPU socket lever
back into its locked position.
Step 2:
Lift the metal load plate from the CPU socket.
(DO NOT touch socket contacts.)
Step 4:
Hold the CPU with your thumb and index
fingers. Align the CPU pin one marking (triangle)
with the pin one corner of the CPU socket (or
you may align the CPU notches with the socket
alignment keys) and gently insert the CPU
into position.

Hardware Installation- 15 -
1-3-2 Installing the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the motherboard. (The following procedure
uses Intel®boxed cooler as the example cooler.)
Step 1:
Apply an even and thin layer of thermal grease
on the surface of the installed CPU.
Step 2:
Before installing the cooler, note the direction
of the arrow sign on the male push pin.
(Turning the push pin along the direction of
arrow is to remove the cooler, on the contrary,
is to install.)
Male
Push Pin
Female
Push Pin
The Top
of Female
Push Pin
Direction of
the Arrow Sign
on the Male
Push Pin
Step 3:
Place the cooler atop the CPU, aligning the
four push pins through the pin holes on the
motherboard. Push down on the push pins
diagonally.
Step 4:
You should hear a "click" when pushing down each
pushpin. Checkthatthe Male andFemale push pins
are joined closely. (Refer to your CPU cooler instal-
lation manual for instructions on installing the cooler.)
Use extreme care when removing the CPU cooler because the thermal grease/tape between
the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may
damage the CPU.
Step 5:
After the installation, check the back of the
motherboard. If the push pin is inserted as the
picture above, the installation is complete.
Step 6:
Finally, attach the power connector of the CPU
cooler to the CPU fan header (CPU_FAN) on
the motherboard.

GA-EG41M-S2H/S2 Motherboard - 16 -
DDR2_1 DDR2_2
1-4 Installing the Memory
Read the following guidelines before you begin to install the memory:
•Make sure that the motherboard supports the memory. It is recommended that memory of
the same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest memory support list.)
•Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
•Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.
1-4-1 Dual Channel Memory Configuration
This motherboard provides two DDR2 memory sockets and supports Dual Channel
Technology. After the memory is installed, the BIOS will automatically detect the
specifications and capacity of the memory. Enabling Dual Channel memory mode
will double the original memory bandwidth.
The two DDR2 memory sockets are divided into two channels and each channel has one memory
socket as following:
Channel 0: DDR2_1
Channel 1: DDR2_2
Due to chipset limitation, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one DDR2 memory module is installed.
2. When enabling Dual Channel mode with two memory modules, it is recommended that
memory of the same capacity, brand, speed, and chips be used.
When memory modules of different capacity and chips are installed, a message which says
memory is operating in Flex Memory Mode will appear during the POST. Intel®Flex Memory
Technology offers greater flexibility to upgrade by allowing different memory sizes to be
populated and remain in Dual Channel mode/performance.

Hardware Installation- 17 -
1-4-2 Installing a Memory
Notch
DDR2 DIMM
Before installing a memory module , make sure to turn off the computer and unplug
the power cord from the power outlet to prevent damage to the memory module.
DDR2 DIMMs are not compatible to DDR DIMMs. Be sure to install DDR2 DIMMs on
this motherboard.
Step 1:
Note the orientation of the memory module. Spread the retaining
clips at both ends of the memory socket. Place the memory
module on the socket. As indicated in the picture on the left,
place your fingers on the top edge of the memory, push down
on the memory and insert it vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place when
the memory module is securely inserted.
A DDR2 memory module has a notch, so it can only fit in one direction. Follow the steps below to
correctly install your memory modules in the memory sockets.

GA-EG41M-S2H/S2 Motherboard - 18 -
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
•Make sure the motherboard supports the expansion card. Carefully read the manual that
came with your expansion card.
•Always turn off the computer and unplug the power cord from the power outlet before
installing an expansion card to prevent hardware damage.
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for
your expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Example: Installing and Removing a PCI Express Graphics Card:
•Installing a Graphics Card:
Gently insert the graphics card into the PCI Ex-
press slot. Make sure the graphics card is locked
by the latch at the end of the PCI Express slot.
•Removing the Card:
Press the white latch at the end of the PCI Express slot to release the card
and then pull the card straight up from the slot.
PCI Slot
PCI Express x16 Slot

Hardware Installation- 19 -
PCI Express x4 Graphics Card Support List
The items below are supported under Windows XP operating system only. When using an add-on
graphics card, please first delete the onboard graphics driver before installing the driver for the add-on
graphics card.
Graphics Chip Maker Model Name
ATI Radeon X1300 GIGABYTE GV-RX13128D-RH
ATI Radeon X1550 GIGABYTE GV-RX155256D-RH
ATI Radeon X1600 Pro GIGABYTE GV-RX16P256DE-RH
ATI Radeon X1600 XT GIGABYTE GV-RX16T256V-RH
ATI Radeon X1650 Pro GIGABYTE GV-RX165P256D-RH
ATI Radeon X1650 XT GIGABYTE GV-RX165T256D-RH
ATI Radeon X1800 XL GIGABYTE GV-RX18L256V-B
ATI Radeon X1900 XTX GIGABYTE GV-RC19T512B-RH
ATI Radeon X1950 Pro GIGABYTE GV-RX195P256D-RH
ATI Radeon X1900 XT GIGABYTE GV-RX19T512VB-RH
ATI Radeon HD2600 Pro GIGABYTE GV-RX26P512H
ATI Radeon HD2400 Pro GIGABYTE GV-RX24P256H
ATI Radeon HD2400 XT GIGABYTE GV-RX24T256HP
ATI Radeon HD2600 XT GIGABYTE GV-RX26T256H
ATI Radeon HD2900 XT GIGABYTE GV-RX29T512VH-B
ATI Radeon HD3850 (PCIE 2.0) GIGABYTE GV-RX385512H
ATI Radeon HD3870 (PCIE 2.0) GIGABYTE GV-RX387512H
ATI Radeon HD3450 (PCIE 2.0) GIGABYTE GV-RX345256H
ATI Radeon HD3650 (PCIE 2.0) GIGABYTE GV-RX365512H
ATI Radeon X600 XT MSI RX600 XT-TD128
ATI Radeon X700 Pro ASUS AX700PRO
ATI Radeon X800 XT ASUS AX800XT
(Continued...)

GA-EG41M-S2H/S2 Motherboard - 20 -
Graphics Chip Maker Model Name
NVIDIA Geforce 6500 GIGABYTE GV-NX65128DE
NVIDIA Geforce 7100 GS GIGABYTE GV-NX71G512P8-RH
NVIDIA Geforce 7300 GS GIGABYTE GV-NX73G128D-RH
NVIDIA Geforce 7300 GT GIGABYTE GV-NX73T256D-RH
NVIDIA Geforce 7300 LE GIGABYTE GV-NX73L128D-RH
NVIDIA Geforce 7600 GS GIGABYTE GV-NX76G256D-RH
NVIDIA Geforce 7600 GT GIGABYTE GV-NX76T256D-RH
NVIDIA Geforce 7800 GT GIGABYTE GV-NX78T256V-B
NVIDIA Geforce 7800 GTX GIGABYTE GV-NX78X256V-B
NVIDIA Geforce 7900 GS GIGABYTE GV-NX79G256DP-RH
NVIDIA Geforce 7900 GT GIGABYTE GV-NX79T256DP-RH
NVIDIA Geforce 8600 GT GIGABYTE GV-NX86T256H
NVIDIA Geforce 8500 GT GIGABYTE GV-NX85T512HP
NVIDIA Geforce 7200GS GIGABYTE GV-NX72G128D
NVIDIA Geforce 8400GS GIGABYTE GV-NX84G256H
NVIDIA Geforce 8800 Ultra GIGABYTE GV-NX88U768H-B
NVIDIA Geforce 8800 GT(PCIE 2.0) GIGABYTE GV-NX88T512HP
NVIDIA Geforce 9600 GT(PCIE 2.0) GIGABYTE GV-NX96T512HP
NVIDIA Geforce 9800 GT(PCIE 2.0) GIGABYTE GV-NX98X512H-B
NVIDIA Geforce 6600 ASUS EN6600/TD/128
NVIDIA Geforce 6600 GT ASUS EN6600GT/TD/128
NVIDIA Geforce 6600 GT Leadtek WinFast PX6600GT TDH
NVIDIA Geforce 6800 GT MSI NX6800GT-TD256E
NVIDIA Geforce 7600 GT ELSA GLADIAC 760GT
NVIDIA Geforce 7900 GT ELSA GLADIAC 790GT
NVIDIA Geforce 7950GX2 NVIDIA P502/P602
NVIDIA Geforce 7900 GTX NVIDIA NVIDIA 7900GTX
NVIDIA Geforce 8800 GTX NVIDIA NVIDIA 8800GTX
NVIDIA Geforce 8600 GTS NVIDIA NVIDIA 8600GTS