Gigabyte MD71-HB1 User manual

MD71-HB1
Intel®Socket LGA3647 processor motherboard
User Manual
Rev. 1.0

Copyright
© 2019 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentation:
 UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis
product (e.g. motherboard, server barebones), covering hardware and BIOS.

User Guide: detailed information about the installation & use of an add-on hardware or
  softwarecomponent(e.g.BMCrmware,rail-kit)compatiblewiththisproduct.
Quick Installation Guide: a short guide with visual diagrams that you can reference easily for
installation purposes of this product (e.g. motherboard, server barebones).
Please see the support section of the online product page to check the current availability of these
documents
For More Information
Forrelatedproductspecications,thelatestrmwareandsoftware,andotherinformation,pleasevisit
our website at: http://www.gigabyte.com.
For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our
reseller portal: http://reseller.b2b.gigabyte.com
For further technical assistance, please contact your GIGABYTE representative or visit
http://esupport.gigabyte.com/ to create a new support ticket.
For any general sales or marketing enquires, you may message GIGABYTE server directly by
email: server[email protected].

- 3 -
Table of Contents
MD71-HB1 Motherboard Layout......................................................................................5
Block Diagram .................................................................................................................7
Chapter 1 Hardware Installation .....................................................................................8
1-1 Installation Precautions.................................................................................... 8
1-2 ProductSpecications...................................................................................... 9
1-3 Installing and Removing the CPU and Heat Sink........................................... 11
1-4 Installing and Removing Memory................................................................... 12
1-4-1 6-ChannelMemoryConguration..........................................................................12
1-4-2 Installing and Removing a Memory Module ..........................................................13
1-4-3 DIMM Population Table .........................................................................................13
1-5 Installing the M.2 SSD Module....................................................................... 14
1-6 Back Panel Connectors.................................................................................. 15
1-7 Internal Connectors........................................................................................ 16
1-8 Jumper Settings ............................................................................................. 25
Chapter 2 BIOS Setup ..................................................................................................26
2-1 The Main Menu .............................................................................................. 28
2-2 Advanced Menu ............................................................................................. 31
2-2-1 Trusted Computing .................................................................................................32
2-2-2 RedshHostInterfaceSettings..............................................................................33
2-2-3 Serial Port Console Redirection .............................................................................34
2-2-4 SIOConguration...................................................................................................38
2-2-5 PCI Subsystem Settings.........................................................................................39
2-2-6 USBConguration..................................................................................................40
2-2-7 PostReportConguration ......................................................................................41
2-2-8 NVMeConguration ...............................................................................................42
2-2-9 ChipsetConguration.............................................................................................43
2-2-10 NetworkStackConguration..................................................................................44
2-2-11 iSCSIConguration................................................................................................45
2-2-12 Intel(R) X722 Gigabit Network Connection.............................................................46
2-2-13 VLANConguration................................................................................................48
2-2-14 Driver Health...........................................................................................................50
2-3 Chipset Setup Menu....................................................................................... 51
2-3-1 ProcessorConguration.........................................................................................52
2-3-2 CommonRefCodeConguration ...........................................................................54
2-3-3 UPIConguration ...................................................................................................55
2-3-4 MemoryConguration ............................................................................................57

- 4 -
2-3-5 IIOConguration ....................................................................................................59
2-3-6 AdvancedPowerManagementConguration........................................................61
2-3-7 PCHConguration..................................................................................................63
2-3-8 MiscellaneousConguration ..................................................................................65
2-3-9 ServerMEConguration ........................................................................................66
2-3-10 Runtime Error Logging Settings .............................................................................67
2-3-11 Power Policy...........................................................................................................69
2-4 Server Management Menu............................................................................. 71
2-4-1 System Event Log ..................................................................................................73
2-4-2 ViewFRUInformation ............................................................................................74
2-4-3 BMCVLANConguration.......................................................................................75
2-4-4 BMCNetworkConguration...................................................................................76
2-4-5 IPv6BMCNetworkConguration...........................................................................77
2-5 Security Menu ................................................................................................ 78
2-5-1 Secure Boot ...........................................................................................................79
2-6 Boot Menu...................................................................................................... 81
2-6-1 UEFI USB Drive BBS Priorities .............................................................................83
2-6-2 UEFI NETWORK Drive BBS Priorities .......................................................... 84
2-6-3 UEFI Application Boot Priorities ................................................................... 85
2-7 Save & Exit Menu........................................................................................... 86
2-8 BIOS POST Codes ........................................................................................ 88
2-8-1 AMI Standard - PEI.................................................................................................88
2-8-2 AMI Standard - DXE...............................................................................................88
2-8-3 AMI Standard - ERROR .........................................................................................90
2-8-4 Intel UPI POST Codes............................................................................................91
2-8-5 Intel UPI Error Codes .............................................................................................91
2-8-6 Intel MRC POST Codes .........................................................................................92
2-8-7 Intel MRC Error Codes ...........................................................................................92
2-8-8 Intel PM POST Codes ............................................................................................93
2-8-9 Intel PM POST Codes ............................................................................................93
2-9 BIOS POST Beep code (AMI standard)......................................................... 94
2-9-1 PEI Beep Codes.....................................................................................................94
2-9-2 DXE Beep Codes ...................................................................................................94

- 5 -
MD71-HB1 Motherboard Layout
DIMM_P0_A0 DIMM_P0_B0 DIMM_P0_C0
DIMM_P1_J0 DIMM_P1_K0 DIMM_P1_L0 DIMM_P1_I0 DIMM_P1_H0 DIMM_P1_G0
DIMM_P0_F0 DIMM_P0_E0 DIMM_P0_D0
CPU0
CPU1
8
9
10
11
12
1415
21
20
16
22
26
28
29
30
31
32
33
34
44
35
36
37 38 39 40 41
43
45
46
23
1 2 3 4 5 7
131718
19
42
6
25
27
24

- 6 -
Item Code Description
1 SW_ID ID Button with LED
2 USB3_MLAN Server Management LAN Port (Top)/ USB 3.0 Ports (Bottom)
3 LAN1 GbE Ethernet LAN Port #1
4 LAN2 GbE Ethernet LAN Port #2
5 LAN3_4 GbE Ethernet LAN Port #3 (Top)/GbE LAN port #4 (Bottom)
6 SYS_FAN5 System Fan Connector #5
7 VGA_1 VGA Port
8 P12V_AUX2 2x4Pin12VPowerConnector(forCPU1)
9 PMBUS PMBus Connector
10 ATX1 2x12 Pin Main Power Connector
11 P12V_AUX1 2x4Pin12VPowerConnector(forCPU0)
12 CPU0_FAN CPUFanConnector(forCPU0)
13 P12V_AUX3 2x5Pin12VPowerConnector(forPCIeSlot)
14 F_USB3 Front Panel USB 3.0 Connector
15 SATA1 SlimlineConnector#1(SATA6Gb/sSignal/forSATA#4~#7)
16 SATA0 SlimlineConnector#0(SATA6Gb/sSignal/forSATA#0~#3)
17 SSATA0 SlimlineConnector#0(SATA6Gb/sSignal/forsSATA#0~#3)
18 SYS_FAN4 System Fan Connector #4
19 SYS_FAN3 System Fan Connector #3
20 IPMB IPMB Connector
21 SSATA5 SATA 6Gb/s Connector #5
22 SATA_DOM2 SATADOMSupportPowerConnectorforSSATAPort#5
23 SSATA4 SATA 6Gb/s Connector #4
24 LAN4_ACT LAN#4 Active LED
25 SATA_DOM1 SATADOMSupportPowerConnectorforSSATAPort#4
26 SW_RAID SATA RAID Upgrade Key
27 LAN3_ACT LAN#3 Active LED
28 M2_SK1 M.2 Slot #1 (PCIe Gen3 x4, Support NGFF-2260/2280)
29 FP_1 Front Panel Header
30 BP_1 HDD Back Plane Board Connector
31 CASE_OPEN Case Open Intrusion Alert Header
32 SYS_FAN2 System Fan Connector #2
33 SYS_FAN1 System Fan Connector #1
34 LPC_TPM TPM Connector
35 COM1 Serial Port Cable Connector
36 PCIE_1 PCIe x16 slot #1 (Gen3 x16)
37 PCIE_2 PCIe x8 slot #2 (Gen3 x8)
38 PCIE_3 PCIe x16 slot #3 (Gen3 x16)
39 PCIE_4 PCIe x8 slot #4 (Gen3 x8)
40 PCIE_5 PCIe x16 slot #5 (Gen3 x16)
41 PCIE_6 PCIe x16 slot #6 (Gen3 x16)
42 CPU1_FAN CPUFanConnector(forCPU1)
43 PCIE_7 PCIe x16 slot #7 (Gen3 x16)
44 M2_SK2 M.2 slot #2 (PCIe Gen3 x4, Support NGFF-2260/2280)
45 BAT Ba�erySocket
46 LED_BMC BMC Firmware Readiness LED

- 7 -
Block Diagram

Hardware Installation - 8 -
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can
becomedamagedasaresultofelectrostaticdischarge(ESD).Priortoinstallation,carefullyread
theuser'smanualandfollowtheseprocedures:
• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warrantystickerprovidedbyyourdealer.Thesestickersarerequiredforwarrantyvalidation.
• AlwaysremovetheACpowerbyunpluggingthepowercordfromthepoweroutletbefore
installing or removing the motherboard or other hardware components.
• When connecting hardware components to the internal connectors on the motherboard,
make sure they are connected tightly and securely.
• When handling the motherboard, avoid touching any metal leads or connectors.
• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic
componentssuchasamotherboard,CPU or memory.IfyoudonothaveanESDwrist
strap,keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
• Priortoinstallingthe motherboard,pleasehaveitontopofan antistaticpadorwithinan
electrostatic shielding container.
• Before unpluggingthepowersupplycablefromthemotherboard,makesure thepower
supplyhasbeenturnedoff.
• Beforeturningonthepower,makesurethepowersupplyvoltagehasbeensetaccordingto
the local voltage standard.
• Beforeusingtheproduct,pleaseverifythatallcablesandpowerconnectorsofyour
hardware components are connected.
• To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
• Makesuretherearenoleftoverscrewsormetalcomponentsplacedonthemotherboardor
within the computer casing.
• Donotplacethecomputersystemonanunevensurface .
• Do not place the computer system in a high-temperature environment.
• Turning on the computer power during the installation process can lead to damage to
system components as well as physical harm to the user.
• Ifyouareuncertainaboutanyinstallationstepsorhaveaproblemrelatedtotheuseofthe
product,pleaseconsultacertiedcomputertechnician.
Chapter 1 Hardware Installation

- 9 - Hardware Installation
1-2 Product Specications
CPU
2nd Generation Intel® Xeon® Scalable Processors
Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor,
Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
2 x LGA 3647, Socket P
RecommendedFANModule:DynatronB5
CPU TDP Up to 205W
NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
Chipset Intel® C622 Express Chipset
Memory 12 x DIMM Slots
DDR4 Memory Supported Only
6-Channel Memory Architecture
RDIMM Modules Up to 64GB Supported
LRDIMM Modules Up to 128GB Supported
1.2VModules:2933/2666/2400MHz
Onboard
Graphics
Integrated in Aspeed® AST2500
2DVideoGraphicAdapterwithPCIeBusInterface
1920x1200@60Hz 32bpp, DDR4 SDRAM
LAN 2 x 10Gb/s BASE-T LAN Ports
2 x 1Gb/s LAN Ports
1 x 10/100/1000 Management LAN
Expansion Slots Slot_7:1xPCIex16(Gen3x16bus)SlotfromCPU_1
Slot_6:1xPCIex16(Gen3x16bus)SlotfromCPU_1
Slot_5:1xPCIex16(Gen3x16bus)SlotfromCPU_1
Slot_4:1xPCIex8(Gen3x8bus)SlotfromCPU_1,sharedwithSlot_5
Slot_3:1xPCIex16(Gen3x16bus)SlotfromCPU_0
Slot_2:1xPCIex8(Gen3x8bus)SlotfromCPU_0,sharedwithM.2PCIex4bus
Slot_1:1xPCIex16(Gen3x16bus)SlotfromCPU_0
2xM.2Slots:
- M-key
- PCIe Gen3 x4 per Slot
- Supports NGFF-22110/2280 Cards
- From CPU_0
StorageInterface 3xSlimSASfor12xSATAIII6Gb/sPorts
2 x 7-pin SATA III 6Gb/s with SATA DOM Supported
RAID Intel® SATA RAID 0/1/10/5

Hardware Installation - 10 -
Internal I/O
Connectors
1 x 24-pin ATX Main Power Connector
2 x 8-pin ATX 12V Power Connectors
2 x SATA DOM Power Pin Headers
3 x SlimSAS Connectors
2 x 7-pin SATA Connectors
2 x M.2 Slots
2 x CPU Fan Headers
5 x System Fan Headers
1 x USB 3.0 Header
1 x COM Header
1 x LPC TPM Header
1 x VROC Connector
1 x Front Panel Header
1 x HDD Back Plane Board Header
1 x PMBus Connector
1 x IPMB Connector
1 x Clear CMOS Jumper
1 x BIOS Recovery Jumper
1 x Case Open Header
Rear I/O
Connectors
2 x USB 3.0 Ports
1 x VGA Port
4 x RJ45 Ports
1 x MLAN Port
1 x ID Button with LED
TPM 1xTPMHeaderwithLPCInterface
OptionalTPM2.0kit:CTM000
Board
Management
Aspeed® AST2500 Management Controller
GIGABYTEManagementConsole(AMIMegaRACSP-X)webinterface
Form Factor E-ATX
305mm W x 330mm D
GIGABYTE reserves the right to make anychanges tothe product specicationsand product-related
informationwithoutpriornotice.

- 11 - Hardware Installation
1-3 Installing and Removing the CPU and Heat Sink
ReadthefollowingguidelinesbeforeyoubegintoinstalltheCPU:
• Make sure that the motherboard supports the CPU.
• Alwaysturnoffthecomputerandunplugthepowercordfromthepoweroutletbeforeinstalling
the CPU to prevent hardware damage.
• Unplugallcablesfromthepoweroutlets.
• Disconnectalltelecommunicationcablesfromtheirports.
• Placethesystemunitonaatandstablesurface.
• Open the system according to the instructions.
WARNING!
Failuretoproperlyturnofftheserverbeforeyoustartinstallingcomponentsmaycauseserious
damage.Donotattempttheproceduresdescribedinthefollowingsectionsunlessyouarea
qualiedservicetechnician.
Follow these instructions to Install the CPU:
1. Align and install the processor on the carrier.
Note: ApplythermalcompoundevenlyonthetopoftheCPU.Removetheprotectivecoverfromthe
   undersideoftheheatsink.
2. Carefullyiptheheatsinkover.Theninstallthecarrierassemblyonthebottomoftheheatsinkand
make sure the gold arrow is located in the correct direction.
3. Remove the CPU cover.
Note: SaveandreplacetheCPUcoveriftheprocessorisremovedfromitssocket.
4. Align the heatsink with the CPU socket by the guide pins and make sure the gold arrow is located in the
 correctdirection.ThenplacetheheatsinkontothetopoftheCPUsocket.
5 To secure the heatsink, tighten the screws in a sequential order (1g2g3g4).
Note: When dissambling the heatsink, loosen the screws in reverse order (4g3g2g1)
12
3
4
1
1
4
4
3
3
2
2

Hardware Installation - 12 -
1-4 Installing and Removing Memory
Readthefollowingguidelinesbeforeyoubegintoinstallthememory:
• Makesurethatthemotherboardsupportsthememory.Itisrecommendedtousememoryofthe
same capacity, brand, speed, and chips.
• Alwaysturnoffthecomputerandunplugthepowercordfromthepoweroutletbeforeinstalling
the memory to prevent hardware damage.
• Memorymoduleshaveafoolproofdesign.Amemorymodulecanbeinstalledinonlyone
direction.Ifyouareunabletoinsertthememory,switchthedirection.
1-4-1 6-Channel Memory Conguration
Thismotherboardprovides12DDR4memorysocketsandsupports6-ChannelTechnology.Afterthememory
isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.
DIMM_P0_A0 DIMM_P0_B0 DIMM_P0_C0
DIMM_P1_J0 DIMM_P1_K0 DIMM_P1_L0 DIMM_P1_I0 DIMM_P1_H0 DIMM_P1_G0
DIMM_P0_F0 DIMM_P0_E0 DIMM_P0_D0
CPU0
CPU1

Hardware Installation - 13 -
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 UDIMMs on this motherboard.
1
2
2
Type Ranks Per DIMM
and Data Width
DIMM Capacity (GB)
Speed (MT/s); Voltage (V);
Slots per Channel(SPC) and
DIMM per Channel (DPC)
1 Slot Per Channel
DRAM Density 1DPC
4Gb* 8Gb 16Gb 1.2V
RDIMM SRx8 4GB 8GB 16GB
2933
RDIMM SRx4 8GB 16GB 32GB
RDIMM DRx8 8GB 16GB 32GB
RDIMM DRx4 16GB 32GB 64GB
RDIMM 3DS QRx4 N/A 2H-64GB 2H-128GB
8Rx4 N/A 4H-128GB 4H-256GB
LRDIMM QRx4 32GB 64GB 128GB
LRDIMM
3DS
QRx4 N/A 2H-64GB 2H-128GB
8Rx4 N/A 4H-128GB 4H-256GB
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. ClosetheplasticclipatbothedgesoftheDIMMslotstolocktheDIMMmodule.
3. Reverse the installation steps when you want to remove the DIMM module.
1-4-3 DIMM Population Table
Note: Whenpopula�ngDIMMsintoachannel,slotnumbershavingthesufx“0”mustbepopulatedrst,
  thenfollowedbyslotnumbershavingthesufx“1”.
*4Gb DRAM density is only supported on speeds up to 2666MT/s.

- 14 - Hardware Installation
1-5 Installing the M.2 SSD Module
Follow the steps below to install a M.2 SSD module on your motherboard.
Step1. Insert the M.2 SSD module into the slot.
Step2.Secureitwiththescrew,tighteningasnecessarytofastentheM.2SSDmoduleinplace.
2260
2242
2280
1
2

Hardware Installation - 15 -
1-6 Back Panel Connectors
uVGA Port
Thevideo-inportallowsconnectionviavideoin,whichcanalsoapplytothevideoloopthrufunction.
vRJ-45 LAN Port #3
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
belowforadescriptionofthestatesoftheLANportLEDs.
wRJ-45 LAN Port #4
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
belowforadescriptionofthestatesoftheLANportLEDs.
x10GBASE-T RJ-45 LAN Port #2
The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the
sectionbelowforadescriptionofthestatesoftheLANportLEDs.
y10GBASE-T RJ-45 LAN Port #1
The 10 Gigabit Ethernet LAN port provides Internet connection at up to 10 Gbps data rate. See the
sectionbelowforadescriptionofthestatesoftheLANportLEDs.
zServer Management LAN Port
TheLANportprovidesInternetconnectionwithdatatransferspeedsof10/100/1000Mbps.Thisportis
thededicatedLANportforServerManagement.
{USB 3.0 Ports
TheUSBportsupportstheUSB3.0specification.UsethisportforUSBdevicessuchasaUSB
keyboard/mouse,USBprinter,USBashdriveetc.
|ID button with LED
Whenthesystemidenticationisactive,theIDLEDonthefront/backpanelglowsblue.
v
w
x y
z
{|
Link/Activity LED
Connection/
Speed LED
LAN Port
• Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
deviceandthenremoveitfromthemotherboard.
• Whenremovingthecable,pullitstraightoutfromtheconnector.Donotrockitsidetosideto
prevent an electrical short inside the cable connector.
ID button/LED:
10/100/1000 LAN LED:
State Description
Yellow On 1Gbps data rate
Green On 100Mbps data rate
Off 10Mbps data rate
State Description
Bule On Systemidenticationisactive
Off Systemidenticationisdisabled
u
10GbE LAN LED:
State Description
Yellow On 5Gbps, 2.5Gbps, 1Gps data rate
Green On 10Gbps data rate
Off 100Mbps data rate

- 16 - Hardware Installation
1-7 Internal Connectors
Readthefollowingguidelinesbeforeconnectingexternaldevices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Beforeinstallingthedevices,besuretoturnoffthedevicesandyourcomputer.Unplugthepower
cordfromthepoweroutlettopreventdamagetothedevices.
• Afterinstallingthedeviceandbeforeturningonthecomputer,make surethedevicecablehas
been securely attached to the connector on the motherboard.
1) ATX1 14) SYS_FAN3
2) P12V_AUX1(forCPU0) 15) SYS_FAN4
3) P12V_AUX2(forCPU1) 16) SYS_FAN5
4) P12V_AUX3(forPCIeSlot) 17) PMBUS
5) SSATA4 18) F_USB3
6) SSATA5 19) COM1
7) SATA_DOM1(forSSATA4) 20) IPMB
8) SATA_DOM2(forSSATA5) 21) LPC_TPM
9) SW_RAID 22) FP_1
10) CPU0_FAN 23) BP_1
11) CPU1_FAN 24) LAN3_ACT/ LAN4_ACT
12) SYS_FAN1 25) BAT
13) SYS_FAN2 26) LED_BMC
DIMM_P0_A0 DIMM_P0_B0 DIMM_P0_C0
DIMM_P1_J0 DIMM_P1_K0 DIMM_P1_L0 DIMM_P1_I0 DIMM_P1_H0 DIMM_P1_G0
DIMM_P0_F0 DIMM_P0_E0 DIMM_P0_D0
CPU0
CPU1
8
9
10
11
12
14 15
21
20
16
22
26
23
1
2
3
4
5
7
13
17
18
19
6
24
25

Hardware Installation - 17 -
1/2/3/4) ATX1/P12V_AUX1/P12V_AUX2/P12V_AUX3
(2x12 Main Power Connector and 2x4/2x5 12V Power Connector)
Withtheuseofthepowerconnector,thepowersupplycansupplyenoughstablepowertoallthecomponents
onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturnedoff
andalldevicesareproperlyinstalled.Thepowerconnectorpossessesafoolproofdesign.Connectthepower
supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies
powertotheCPU.Ifthe12Vpowerconnectorisnotconnected,thecomputerwillnotstart.
To meet expansion requirements, it is recommended that a power supply that can withstand high
powerconsumptionbeused(500Worgreater).Ifapowersupplyisusedthatdoesnotprovidethe
required power, the result can lead to an unstable or unbootable system.
ATX1
P12V_AUX1/P12V_AUX2
8
5
4
1
PinNo. Denition
1 GND
2 GND
3 GND
4 GND
5 +12V
6 +12V
7 +12V
8 +12V
ATX1
P12V_AUX1
P12V_AUX2
P12V_AUX3
P12V_AUX3
Pin No. Denition Pin No. Denition
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 -5V
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 3.3V 24 GND
Pin No. Denition
1 GND
2 GND
3 GND
4 GND
5 GND
6 +12V
7 +12V
8 +12V
9 +12V
10 +12V
113
1224
6
1
10
5

- 18 - Hardware Installation
5/6) SSATA4/SSATA5 (SATA 6Gb/s Connectors)
TheSATAconnectorsconformtoSATA6Gb/sstandardandarecompatiblewithSATA3Gb/sstandard.Each
SATA connector supports a single SATA device.
PinNo. Denition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
7/8) SATA_DOM1/ SATA_DOM2 Power Connector
SATA-DOM(DiskonModule)isavailabletoallowforstandalonebootanddiagnosticsdirectthroughSATA
connections on the board.
PinNo. Denition
 1 5VforSATADOM
2 GND
3 No Connect
SATA_DOM1
SSATAIII_4
1
7
(Support SATA DOM Power)
SSATAIII_5
1
1
3
3
SATA_DOM2

Hardware Installation - 19 -
9) SW_RAID (SATA RAID Upgrade Key)
SW_RAID
10/11/12/13/14/15/16) CPU0_FAN/CPU1_FAN/SYS_FAN1/SYS_FAN3/SYS_FAN2/SYS_FAN4
SYS_FAN5 (CPU Fan/System Fan Headers)
Themotherboardhasone4-pinCPUfanheader(CPU_FAN),andtwo4-pin(SYS_FAN)systemfanheaders.
Mostfanheaderspossessafoolproofinsertiondesign.Whenconnectingafancable,besuretoconnect
it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU
fanspeed control, which requires the use of a CPU fan with fan speed control design. Foroptimum heat
dissipation,itisrecommendedthatasystemfanbeinstalledinsidethechassis.
1
1
PinNo. Denition
1 GND
2 +12V
3 Sense
4 Speed Control
• BesuretoconnectfancablestothefanheaderstopreventyourCPUandsystemfrom
overheating. Overheating may result in damage to the CPU or the system may hang.
• Thesefanheadersarenotconfigurationjumperblocks.Donotplacea jumpercaponthe
headers.
SYS_FAN5
4
1
Pin No. Denition
1 GND
2 P_3V3_AUX
3 GND
4 PCH_SATA_RAID_KEY
CPU1_FAN
CPU0_FAN
SYS_FAN2
SYS_FAN1
SYS_FAN3
SYS_FAN4

- 20 - Hardware Installation
18) F_USB3 (USB 3.0 Header)
Theheaderconform toUSB2.0/3.0specication.Each USBheadercan providetwoUSB portsviaan
optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
F_USB3
17) PMBus Connector
ThePowerManagementBus(PMBus)isavariantoftheSystemManagementBus(SMBus)whichis
targetedatdigitalmanagementofpowersupplies.
PMBus
5
1
USB 3.0 Header
1110
201
Pin No. Denition Pin No. Denition
1 Power 11 IntA_P2_D+
2 IntA_P1_SSRX- 12 IntA_P2_D-
3 IntA_P1_SSRX+ 13 GND
4 GND 14 IntA_P2_SSRX+
5 IntA_P1_SSRX- 15 IntA_P2_SSRX-
6 IntA_P1_SSRX+ 16 GND
7 GND 17 IntA_P2_SSRX+
8 IntA_P1_D- 18 IntA_P2_SSRX-
9 IntA_P1_D+ 19 Power
10 NC 20 No Pin
PinNo. Denition
1 PMBus Clock
2 PMBus Data
3 PMBus Alert
4 GND
5 3.3V Sense