Gigabyte GR-NR145D User guide

SystemInstallation Guide
GR-NR145D
1UStorage Server
Rev.1001
25A08-0145D-F00

2
GR-NR145D1UStorage Server
TableofContent
Safety,Careand RegulatoryInformation ............................................3
Introduction ......................................................................................7
ContentsPackages..........................................................................7
WARNING!.......................................................................................7
Chapter1FeaturesSummary............................................................8
Chapter2SystemOverview............................................................10
Chapter3SystemHardwareInstallation ...........................................11
Step 3-1:ChassisRemoval.........................................................................11
Step 3-2:CPUInstallation............................................................................ 12
Step 3-3:HeatSinkInstallation ..................................................................... 13
Step 3-4:MemoryInstallation....................................................................... 13
Step 3-5:PCIExpansion CardInstallation ...................................................... 14
Step 3-6:HardDisk DriveInstallation............................................................. 15
Step 3-7:FANDuctRemovaland Installation ................................................. 16
Step 3-8:Reinstall ChassisCover................................................................ 16
Chapter4AppearanceofGR-NR145D.............................................17
4-1:FrontViewofGR-NR145D.................................................................... 17
4-2:RearViewofGR-NR145D.................................................................... 18
4-3:Switchand LEDIndicatorsIntroduction .................................................... 19
4-4:ConnectorIcon Description................................................................... 20
Chapter5Appendix........................................................................21
5-1:Acronyms.......................................................................................... 21

3
SafetyInformation
Safety,Careand RegulatoryInformation
LImportantsafetyinformation
Read and followall instructionsmarked on theproductand inthe documentation beforeyou operate
yoursystem.Retainall safetyand operating instructionsforfutureuse.
*The productshouldbe operated onlyfromthe type ofpowersourceindicated on the rating label.
*Ifyourcomputerhasavoltage selectorswitch,makesurethatthe switchisinthe properposition for
yourarea.The voltage selectorswitchissetatthe factorytothe correctvoltage.
*Theplug-socketcombination mustbeaccessibleatall timesbecauseitservesasthe maindisconnect-
ing device.
*Allproductshipped withathree-wireelectricalgrounding-type plugonlyfitsintoagrounding-type power
outlet. Thisisasafetyfeature.The equipmentgrounding shouldbe inaccordancewithlocaland national
electricalcodes.Theequipmentoperatessafelywhen itisused inaccordancewithitsmarked electrical
ratingsand productusage instructions
*Donotusethisproductnearwateroraheatsource.
*Setup the producton astableworksurfaceorsoastoensurestabilityofthe system.
*Openingsinthecaseareprovided forventilation.Donotblock orcovertheseopenings.Makesureyou
provide adequatespacearound thesystemforventilationwhen you setupyourworkarea.Neverinsert
objectsofanykind intothe ventilation openings.
*Toavoidelectricalshock,always unplug all powercablesand modemcablesfromthe wall outlets
beforeremoving covers.
*Allowthe producttocoolbeforeremoving coversortouching internalcomponents.
LPrecaution forProductwithLaserDevices
Observethe following precautionsforlaserdevices:
*Donotopenthe CD-ROMdrive,makeadjustments,orperformproceduresonalaserdeviceotherthan
thosespecified inthe product'sdocumentation.
*Onlyauthorized servicetechniciansshouldrepairlaserdevices.
LPrecaution forProductwithModems,Telecommunications,otLocalArea
NetworkOptions
Observethe following guidelineswhen working withoptions:
*Donotconnectoruseamodemortelephoneduring alightning storm.Theremaybeariskofelectrical
shock fromlightning.

4
GR-NR145D1UStorage Server
*Toreducethe risk offire,useonlyNo.26AWGorlargertelecommunicationsline cord.
*Donotplug amodemortelephone cableintothe networkinterfacecontroller(NIC)receptacle.
*Disconnectthe modemcablebeforeopening aproductenclosure,touching orinstalling internal
components,ortouching an uninsulated modemcableorjack.
*Donotuseatelephone line toreportagasleakwhileyou areinthe vicinityofthe leak.
LFederalCommunicationsCommission (FCC)Statement
Note:Thisequipmenthasbeentested and foundtocomplywiththe limitsforaClassBdigitaldevice,
pursuanttoPart15 oftheFCC Rules.Theselimitsaredesigned toprovidereasonableprotection against
harmfulinterferencewhen the equipmentisoperated inacommercialenvironment. Thisequipment
generates,uses,and can radiateradiofrequency energyand,ifnotinstalledandused inaccordancewith
the instruction manual,maycauseharmfulinterferencetoradiocommunications.Operation ofthis
equipmentinaresidentialarea islikelytocauseharmfulinterferenceinwhichcasethe userwill be
required tocorrectthe interferenceathisownexpense.
Properlyshielded and grounded cablesand connectorsmustbe used inordertomeetFCC emission
limits.Neitherthe providernorthe manufacturerareresponsibleforanyradioortelevision interference
caused byusing otherthan recommended cablesand connectorsorbyunauthorized changesor
modificationstothisequipment.Unauthorized changesormodificationscouldvoidthe user'sauthorityto
operatethe equipment.
ThisdevicecomplieswithPart15ofthe FCC Rules.Operation issubjecttothe followingtwoconditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesired
operation.
LFCC part68 (applicabletoproductsfittedwithUSAmodems)
The modemcomplieswithPart68 ofthe FCC Rules.Onthisequipmentisalabelthatcontains,
among otherinformation,the FCC registration numberand RingerEquivalenceNumber(REN)forthis
equipment. You must, upon request, provide thisinformation toyourtelephone company.
If yourtelephone equipmentcausesharmtothe telephone network,the Telephone Companymay
discontinue yourservicetemporarily.Ifpossible,theywillnotifyinadvance.But,ifadvancenoticeisnot
practical,youwill be notifiedassoonaspossible.You willbeinformedofyourrighttofileacomplaintwith
the FCC.

5
SafetyInformation
Yourtelephone companymaymakechangesinitsfacilities,equipment, operations,orproceduresthat
couldaffectproperoperation ofyourequipment. Iftheydo,you willbe notified inadvancetogiveyou an
opportunitytomaintainuninterrupted telephone service.
The FCC prohibitsthisequipmenttobe connected topartylinesorcoin-telephone service.
The FCC alsorequiresthe transmitterofaFAXtransmission be properlyidentified (perFCC RulesPart
68,Sec.68.381 (c)(3)).
/forCanadian usersonly/
LCanadianDepartmentofCommunicationsCompliance Statement
Thisdigitalapparatusdoesnotexceed the Class Blimitsforradionoiseemissionsfromdigital
apparatusassetoutinthe radiointerferenceregulationsofIndustryCanada.
Le presentappareil numerique n'emetpasde bruitsradioelectriquesdepassantleslimitesapplicablesaux
appareilsnumeriquesde ClasseBprescritesdanslereglementsurlebrouillage radioelectriqueedictepar
IndustrieCanada.
LDOCnotice (forproductsfittedwithanIndustryCanada-compliantmodem)
The Canadian DepartmentofCommunicationslabelidentifiescertified equipment. Thiscertification
meansthatthe equipmentmeetscertaintelecommunicationsnetworkprotective,operationaland safety
requirements.The Departmentdoesnotguarantee the equipmentwill operatetothe usersatisfaction.
Beforeinstalling thisequipment, usersensurethatitispermissibletobe connected tothe facilitiesofthe
localTelecommunicationsCompany.The equipmentmustalsobe installedusing an acceptablemethod
ofconnection.The customershouldbe awarethatcompliancewiththeaboveconditionsmightnotprevent
degradation ofserviceinsomesituations.
Repairstocertifiedequipmentshouldbe madebyan authorizedCanadianmaintenancefacilitydesignated
bythesupplier.Anyrepairsoralterationsmade bytheusertothisequipment,orequipmentmalfunctions,
maygivethe telecommunicationscompanycausetorequestthe usertodisconnectthe equipment.
Usersshouldensurefortheirownprotection thatthe electricalground connectionsofthe powerutility,
telephone linesand internalmetallicwaterpipe system,ifresentareconnected together.Thisprecaution
maybe particularlyimportantinruralareas.
Caution:Usersshouldnotattempttomakesuchconnectionsthemselves,butshouldcontactthe
appropriateelectricinspection authority,orelectrician,asappropriate.

6
GR-NR145D1UStorage Server
NOTICE:The Load Number(LN)assigned toeachterminaldevicedenotesthe percentage ofthe total
load tobe connected toatelephone loop whichisused bythe device,topreventoverloading.The
termination on aloop mayconsistofanycombination ofdevicessubjectonlytothe requirementthatthe
sumofthe Load Numbersofall the devicesdoesnotexceed 100.
/forEuropean usersonly/
CAUTION
vDangerofexplosion ifbatteryisincorrectly
replaced.
vReplaceonlywiththe sameorequivalent
type recommended bythe manufacturer.
vDisposeofused batteriesaccording tothe
manufacturer’sinstructions.

7
Introduction
þGR-NR145DChassisþGA-8IKHXRMotherboard(Installed)
þPowerSupply(Installed)þCPUHeatSinkx1
þFANDuctx1(Installed)þSilmtype CD-ROMdrive(Installed)
þHandleKitx2þGR-NR145Dsysteminstallation guide
þManual,Softwareand LicenseCD þIPMIDriverCD
þIPMIManual
Introduction
WelcometoGigabyteGR-NR145DStorage ServerInstallation Guide.The guide providesinstruc-
tionsforconfiguration hardwareforthe GR-NR145D.
Thisinstallation guide willassistyou ininstalling all the essentialcomponentsforthe seversystem.
Foryourprotection,pleaseread and undertand allofthe safetyand operatinginstructionsregarding your
GigabyteStorage Serverandretainforfuturereference.The proceduresinthisguidebookassumethat
yourareasystemornetworkadministratorexperienced ininstalling similarhardware.
ContentsPackages
When openingthe package,pleaseensurethesystemcomponentsarenotdamaged duringthe shipping.
Using the following checklisttoverifythe contents.If anycomponentismissing ordamaged inthe
system,pleasecontactyourvendorimmediately.
Computermotherboardsand expansion cardscontainverydelicateIntegrated Circuit(IC)chips.To
protectthemagainstdamage fromstaticelectricity,you shouldfollowsomeprecautionswheneveryou
workon yourcomputer.
1.Unplug yourcomputerwhen working on the inside.
2.Useagrounded wriststrap beforehandling computercomponents.Ifyou do nothave
one,touchbothofyourhandstoasafelygrounded objectortoametalobject, suchas
the powersupplycase.
3.Holdcomponentsbythe edgesand trynottouchthe ICchips,leadsorconnectors,or
othercomponents.
4.Placecomponentson agrounded antistaticpad oron the bag thatcamewiththe
componentswheneverthe componentsareseparated fromthe system.
5.EnsurethattheATXpowersupplyisswitched offbeforeyou plug inorremovetheATX
powerconnectoron the motherboard.
WARNING!

8
GR-NR145D1UStorage Server
Motherboard—GA-8IKHXR
ProcessorSupported—SupportsIntel®P4Celeron processorup to2.8GHz
—Intel®P4400MHzFSB
Chipset—Canterwood-ES+HR
SystemMemory:
MemoryCapacity—4xDDR socketup to4GB
MemoryType —SupportECC/Un-buffered dualchannelDDR 266/333/400
DIMM Size—Support128MB,256MB,512MB,and 1GBmemory
I/OExpansion Slots—1xHalf-length64-Bit/66MHzPCI-XSlot
—1xlowprofile64-Bit/66MHzPCI-XSlot(forAdd-on card)
PATARAIDcontroller—Add-onACARD 4PATAPCICard
IntegratedGraphics:
Controller—Integrated,ATIRage-XL
Graphics Memory—8MBSDRAM
Mass StorageSystem—4xHDD trayslot&HotSwappable
—1SlimType CD-ROM
LAN —2xGigabit
1000BASE-T/100BASE-TX/10BASE-T
—Networkfailureover
Built-inI/O—2xserialport(one atrear,anotheron front)
—2xUSB portson frontplane,2xUSB portsatrear
—1xVGAconnector
—2xRJ45 GigabitLANport
—PS2Keyboardand MouseConnectors
ElectricalPowerSupply—SinglePowerSupply250W
SafetyRegulations—FCC,CE,UL
OSSupport—MicrosoftWindowsStorage Server2003
Chapter1Features Summary

9
FeatureSummary
Management—Hardwaremonitor
—IPMI1.5module
Optional—Rail kitfor1U
—COMBO,DVD-RW
LED,Switchindicate—1PowerLEDButton
—2LANLED
—1SystemHealthLED(IPMI/BMC/BIOS)
—1IDLEDButton
—1Resetswitch
—1NMIswitch
SystemDimension —4.36Hx43Wx55.8Dcm
M/BDimension —30.48Wx24.38Dcm(12”x9.6’ATXformfactor)

10
GR-NR145D1UStorage Server
Chapter2SystemOverview
PowerSupply
Harddisk trayx4
SlimtypeCD-ROM4xDDR DIMM socket
CPU-Socket478
1RisercardwithPCI-Xhalf-length64/66MHz;and onewithPCI-Xlow-profile64-
Bit/66MHz
FAN x5

11
HardwareInstallation Process
Pleaseobservethe safetyinformation inchapter“ImportantSafetyInformation”
Donotexposethe servertoextremeenvironmentalconditions.Protectitfromdust, humidity,
and heat.
Step3-1:ChassisRemoval
Step 1Unscrewthe thumbscrewfromthe back ofthe system.
Step 2Pushdownthetwobuttonslocated attwosidesofthe chassis,andslide towardtoremovethe
topcover.Afterremoving thechassiscover,youcan installCPUandotheressentialcomponents.
Chapter3SystemHardwareInstallation
Step1
Thumbscres
Step2
Note:BeforeinstallingCPU,you mustremovethe FANduct.ForFANductremoval,please
see Sub-section 3-7“FAN DuctRemovaland Installtion”fordetail instruction.

12
GR-NR145D1UStorage Server
Step3-2:CPUInstallation
Step 1Toinstall the CPU,liftup the barthatlocated nexttothe socket.
Step 2The noticed cornershouldpointtowardthe end oflever.The CPUwill onlyitinthe orientation
asshownbelow.
Step 3Then,align the CPUand insertitintothe socket.Then,pushthe levertothe originalposition.
Pleasemakesurethe CPUtype and speed thataresupported bythe motherboard.
Step3
Step1Step2

13
HardwareInstallation Process
Step3-3:HeatSinkInstallation
Step 1PuttheHeatSinkon theCPU.Beforeputtingthe heatsinkon the CPU,pleasewellremember
toapplythe thermalconductivitycompound on the CPU.
Step 2Then,Seatthe heatsinkinthe retention moduleswiththe fourscrews.Installation completed.
Step3-4:MemoryInstallation
Step 1The DIMM slothasanotch,the DIMM memorymoduleonlyfitinone direction.
Step 2Align the memorynotchtothe moduleand pushthe memoryintothe DIMM socketvertically.
Step1
Notch
Step2
Step2

14
GR-NR145D1UStorage Server
Step3-5:PCIExpansion CardInstallation
GR-NR145Dprovidesexpansion riserslotsforone PCI-Xhalf-length64/66MHz;andone withPCI-X
low-profile64-Bit/66MHz.Toinstall the peripheral,pleasego through the following steps.
Note!! Beforeinstalling the PCIexpansion card,pleasecheck the cardsizelimitation.Sizelimitation
forPCI-Xfull-height/full-lengthis228.5mm x91.5mm;sizelimitation forLow-ProfileCard:167.5mm
x56 mm .
Step 1Unscrewthe thumbscrewon the riserbracket.
Step 2Detachthe riserbracketwithbothhands.
Step 3Installing the PCIRisercard.Toinstall the risercard,justsimplypushitintothe module.
Step 4Finally,align thestableracks tothe systemmodule(see the arrowdirection mark1),and push
downvertically.
Step 5ReverseStep 1&2tosecurethe riserbracketfirmly.Installation completed.
Step1Step2
Step3Step4

15
HardwareInstallation Process
Step3-6:HardDisk Drive Installation
Step 1Removethe dock the harddisk drivetrayhandleand removethe trayfromthe chassisinsert
the harddisk driveintothe tray.Secureeachharddisk drivewithscrews.
Step1-1Step1-2
Step1-3
Step 2Aftersecuring the harddisk drivewiththe screws,holdthe harddrivehandleatopen position,
placethe trayintochassisand pushthe harddisk drivetrayhandletothe locked position.
Step2-1Step2-2

16
GR-NR145D1UStorage Server
Step3-8:Reinstall ChassisCover
Step 1Closethe coverinun-lock position.Slide ittowardtolock position.
Step 2Makesurethe thumbscrewsaretightened.
Step3-7:FAN DuctRemovaland Installation
Step 1Toremovethe FANduct, justpullup thescrew-holderand unscrewthumbscrewstoremovethe
FANduct. (Pleasesee the circlepointed tofind the screwlocation)
Step 2ForFANDuctInstallation,placethe fan ductonthetop ofheatsinks.Fastenthe screwstothe
locked position and pushdowntescrew-holders.
Step1Step2
Step1Step2

SystemAppearance
17
4-1:FrontViewofGR-NR145D
Chapter4Appearance ofGR-NR145D
uv w
x
y
uSlimType CD-ROM
vUSB connector
wNMIswitch
xID
yLEDs
zResetswitch
{PowerLCD
|Harddisk tray
{
z
|

18
GR-NR145D1UStorage Server
4-2:RearViewofGR-NR145D
uv
wxyz
{|
}
uPower
vPS/2Keyboardand MouseConnectors
wUSB Connectors
xCOMPort
yVGAPort
zLAN1/2Ports
{Expansion Slot
|Expansion Slot
}LocateIDLED/Button

19
LEDDescription
4-3:Switchand LEDIndicatorsIntroduction
Power
ID
NMILAN1/2Activities
Reset
Status
Name
Power
Status
LAN1/2
Activity
Identification
ColorCondition Description
Green OnPowerOn
AmberOn ac_on
-- Off No_ac_dc
AmberOnCriticalFANsFailure
CriticalTemperatureFailure
-- Off No_any_alarm
Green On LANLink/Noaccess
Green BlinkLANaccess
-- Off NoLAN
Blue OnUnitselected foridentification
-- Off Noidentification

20
GR-NR145D1UStorage Server
4-4:ConnectorIcon Description
SuggestIcon Description
Keyboard
VGA
Mouse
LAN
SerialPort
USB