Gigabyte GS-R115L-RH User guide

System Installation Guide
GS-R115V-RH
GS-R115L-RH
1U Rack Mount Server
Intel®PentiumLGA775 ProcessorServerboard
Rev. 1.0
25A08G-015V0-F00

2
GS-R115V-RH/GS-R115L-RH Rack Mount Server
Table of Content
Safety, Care and Regulatory Information................................................4
Introduction..............................................................................................8
GS-R115-RH Series Model List .............................................................8
Contents Packages ................................................................................8
Chapter 1 Features Summary.................................................................9
Chapter 2 System Hardware Installation ............................................... 11
Step 2-1: Chassis Removal and Installation .................................................................11
Step 2-2: CPU Installation............................................................................................... 12
Step 2-3: Heat Sink Installation....................................................................................... 13
Step 2-4: Memory Installation ........................................................................................ 13
Step 2-5: PCI Expansion Card Installation.................................................................... 14
Step 2-6: Hard Disk Drive Installation ............................................................................ 15
GS-R115V-RH.................................................................................................................. 15
GS-R115L-RH .................................................................................................................. 16
Step 2-7: FAN Duct Removal and Installation.............................................................. 17
Chapter 4 Appearance of GS-R115-RH ...............................................18
4-1: Front View of GS-R115V-RH.................................................................................. 18
4-2: Front View of GS-R115L-RH .................................................................................. 18
4-3: Rear View of GS-R115-RH..................................................................................... 19
4-4: Switch and LED Indicators Introduction ................................................................. 20
4-5: LAN LED Description............................................................................................... 21
4-6: Connector Icon Description..................................................................................... 22
Chapter 5 Motherboard Jumper Setting ...............................................23
5-1: GA-5EXSH-RH Motherboard Jumpper Setting...................................................... 23
Chapter 6 BIOS Setup ..........................................................................25
Main...........................................................................................................27
Advanced Processor Options ........................................................................................ 30
Advanced ...................................................................................................33
Memory Configuration..................................................................................................... 34
PCI Configuration............................................................................................................. 35

3
Table of Content
SIO ITE8718F Configuration ........................................................................................... 36
Advanced Chipset Control ............................................................................................. 41
Hardware Monitor ............................................................................................................ 42
Security ......................................................................................................45
Server.........................................................................................................47
System Management...................................................................................................... 48
Console Redirection........................................................................................................ 49
Event Log Configuration.................................................................................................. 51
Boot............................................................................................................54
Exit .............................................................................................................55
Chapter 7 INTELRAID BIOS Configuration ...........................................61
Chapter 8Application Driver Installation ...............................................66
A. Intel Chipset Software Installation Utilities ................................................................ 66
B. Intel LAN Driver Installation ...................................................................................... 69
C. XGI VGA Driver Installation ....................................................................................... 73
D. Intel ICH7R RAID Driver Installation.......................................................................... 76
E. Matrix Storgae Manager Utility Installation ............................................................. 78
F. DirectX 9.0C Driver Installation ................................................................................. 82

4
GS-R115V-RH/GS-R115L-RH Rack Mount Server
Safety, Care and Regulatory Information
Important safety information
Readandfollowallinstructionsmarkedontheproductandinthedocumentationbeforeyouoperate
yoursystem.Retainallsafetyandoperatinginstructionsforfutureuse.
*Theproductshouldbeoperatedonlyfromthetypeofpowersourceindicatedontheratinglabel.
*If yourcomputerhasa voltageselectorswitch,make surethattheswitch isintheproper positionfor
yourarea.Thevoltageselectorswitchissetatthefactorytothecorrectvoltage.
*Theplug-socketcombinationmustbeaccessibleatalltimesbecauseitservesasthemaindisconnect-
ingdevice.
*Allproductshippedwithathree-wireelectricalgrounding-typeplugonlyfitsintoagrounding-typepower
outlet.Thisisasafetyfeature.Theequipmentgroundingshouldbeinaccordancewithlocalandnational
electricalcodes.Theequipmentoperatessafelywhenitisusedinaccordancewithitsmarkedelectrical
ratingsandproductusageinstructions
*Donotusethisproductnearwateroraheatsource.
*Set uptheproducton astableworksurfaceor soastoensure stabilityofthesystem.
*Openingsinthecaseareprovidedforventilation.Donotblockorcovertheseopenings.Makesureyou
provideadequatespacearoundthesystemforventilationwhenyousetupyourworkarea.Neverinsert
objectsofanykindintotheventilationopenings.
*To avoid electrical shock, alwaysunplug allpower cables and modem cablesfrom thewall outlets
beforeremovingcovers.
*Allowtheproducttocoolbeforeremovingcoversortouchinginternalcomponents.
Precaution for Product with Laser Devices
Observethefollowingprecautionsforlaserdevices:
*DonotopentheCD-ROMdrive,makeadjustments,orperformprocedures onalaserdeviceotherthan
thosespecifiedintheproduct'sdocumentation.
*Onlyauthorizedservicetechnicians shouldrepairlaserdevices.
Precaution for Product with Modems, Telecommunications, ot Local Area
Network Options
Observethefollowingguidelineswhenworkingwithoptions:
*Donotconnectoruseamodemortelephoneduringalightningstorm.Theremaybeariskofelectrical
shockfromlightning.

5
SafetyInformation
*Toreduce theriskoffire,useonlyNo.26AWGorlarger telecommunicationslinecord.
*Donotplugamodemortelephonecableintothenetworkinterfacecontroller(NIC)receptacle.
* Disconnect the modem cable before opening a product enclosure, touching or installing internal
components,ortouchinganuninsulatedmodemcableorjack.
*Do notuseatelephonelineto reportagasleakwhile youareinthevicinityof theleak.
Federal Communications Commission (FCC) Statement
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,
pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterference when the equipmentis operated in acommercial environment. Thisequipment
generates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewith
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
requiredtocorrecttheinterferenceathisownexpense.
Properlyshielded andgroundedcablesandconnectorsmustbeusedin ordertomeetFCCemission
limits.Neithertheprovidernorthemanufacturerareresponsibleforanyradioortelevisioninterference
caused by using other than recommended cables and connectors or by unauthorized changes or
modificationstothisequipment.Unauthorizedchangesormodificationscouldvoidtheuser'sauthorityto
operatetheequipment.
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired
operation.
FCC part 68 (applicable to products fitted with USA modems)
ThemodemcomplieswithPart68oftheFCCRules.Onthisequipmentisalabelthatcontains,among
otherinformation,theFCCregistrationnumberandRingerEquivalenceNumber(REN)forthisequipment.
Youmust,uponrequest,providethisinformationtoyourtelephonecompany.
If your telephone equipment causes harm to the telephone network, the Telephone Company may
discontinueyourservicetemporarily.Ifpossible,theywillnotifyinadvance.But,ifadvancenoticeisnot
practical,youwillbenotifiedassoonaspossible.Youwillbeinformedofyourrighttofileacomplaintwith
the FCC.

6
GS-R115V-RH/GS-R115L-RH Rack Mount Server
Yourtelephonecompanymaymakechangesinitsfacilities,equipment,operations,orproceduresthat
couldaffectproperoperationofyourequipment.Iftheydo,youwillbenotifiedinadvancetogiveyouan
opportunitytomaintainuninterruptedtelephoneservice.
TheFCCprohibitsthisequipmenttobeconnectedtopartylinesorcoin-telephoneservice.
TheFCCalsorequiresthetransmitterofaFAXtransmissionbeproperlyidentified(perFCCRulesPart
68,Sec.68.381(c)(3)).
/forCanadian users only/
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatusassetoutintheradiointerferenceregulationsofIndustryCanada.
Lepresentappareilnumeriquen'emetpasdebruitsradioelectriquesdepassantleslimitesapplicablesaux
appareilsnumeriquesdeClasseBprescritesdanslereglementsurlebrouillageradioelectriqueedictepar
IndustrieCanada.
DOC notice (for products fitted with an Industry Canada-compliant modem)
TheCanadianDepartmentofCommunicationslabelidentifiescertifiedequipment.Thiscertification
meansthattheequipmentmeetscertaintelecommunicationsnetworkprotective,operationalandsafety
requirements.TheDepartmentdoesnotguaranteetheequipmentwilloperatetotheusersatisfaction.
Beforeinstallingthisequipment,usersensurethatitispermissibletobeconnectedtothefacilitiesofthe
localTelecommunicationsCompany.Theequipmentmustalsobeinstalledusinganacceptablemethod
ofconnection.Thecustomershouldbeawarethatcompliancewiththeaboveconditionsmightnotprevent
degradationofserviceinsomesituations.
RepairstocertifiedequipmentshouldbemadebyanauthorizedCanadianmaintenancefacilitydesignated
bythesupplier.Anyrepairsoralterationsmadebytheusertothisequipment,orequipmentmalfunctions,
maygivethetelecommunicationscompanycausetorequesttheusertodisconnecttheequipment.
Usersshouldensurefortheirownprotectionthattheelectricalgroundconnectionsofthepowerutility,
telephonelinesandinternalmetallicwaterpipesystem,ifresentareconnectedtogether.Thisprecaution
maybeparticularlyimportantinruralareas.
Caution: Users should not attempt to make such connections themselves, but should contact the
appropriateelectricinspectionauthority,orelectrician,asappropriate.

7
SafetyInformation
NOTICE:TheLoadNumber(LN)assignedtoeachterminaldevicedenotesthepercentageofthetotal
load to be connected to a telephone loop which is used by the device, to prevent overloading. The
terminationonaloopmayconsistofanycombinationofdevicessubjectonlytotherequirementthatthe
sumoftheLoadNumbersofallthedevicesdoesnotexceed100.
/forEuropeanusersonly/
CAUTION
Dangerofexplosionifbatteryisincorrectly
replaced.
Replaceonlywiththesameorequivalent
typerecommendedbythemanufacturer.
Disposeofusedbatteriesaccordingtothe
manufacturer’sinstructions.

8
GS-R115V-RH/GS-R115L-RH Rack Mount Server
;Chassis ;GA-5EXSH-RHMotherboard(Installed)
;PowerSupply (Installed) ;FAN Duct x 1
;CPU Heat Sink x 1 ;StandardFloppyDrive(Installed)
;Silm type CD-ROM drive (Installed) ;Cables(RJ45)
;GS-R115V/L-RH SystemInstallationGuide ;Case Handle Kit x 2
;DriverCDfor motherboard driver&utility
Introduction
WelcometoGigabyteGS-R115V-RHRackmountServerSystemInstallationGuide.Theguide
providesinstructionsforconfigurationhardwarefortheGS-R115V-RHyoursystem.
Thisinstallationguidewillassistyouininstallingalltheessentialcomponentsfortheseversystem.
Foryourprotection,pleasereadandundertandallofthesafetyandoperatinginstructionsregardingyour
GigabyteServerandretainforfuturereference.Theproceduresinthisguidebookassumethatyourare
asystemornetworkadministratorexperiencedininstallingsimilarhardware.
Contents Packages
Whenopeningthepackage,pleaseensure thesystemcomponentsarenotdamagedduringtheshipping.
Using the following checklist to verify the contents. If any component is missing or damaged in the
system,pleasecontactyourvendorimmediately.
GS-R115-RH Series Model List
GS-R115V-RH (Supports2hot-swap SATAHDDs)
GS-R113L-RH(Supports2internal SATAHDDs)

9
FeatureSummary
Motherboard GA-5EXSH-RH
Processor Supported SupportssingleIntel®Pentium®4/Pentium®Dprocessor
IntelPentium®DualCoreinLGA775socket
Supports 800/1066MHzFSB
L2cacheon-dieperprocessorfrom4M
Chipset Intel®3000Chipset
Intel®ICH7R
SystemMemory:
Memory Capacity 4 x DDRII socket up to 8 GB
MemoryType Un-bufferedDDRII533/667
DIMM Size Support 256MB, 512MB, 1GB, and 2GB memory
ErrorCorrection: Single-bitErrorsCorrection,MultipleBitErrorsDetection
Expansion Slot 1 Riser card supports 1 PCI-E x8 and 1 PCI-E x4 add-on cards
1Risercardsupports1PCI-Ex8 (low-profile) and
1PCI-X100/133MHzadd-on cards
SATA RAID controller ICH7R
SupportsSATARAID0,1
Cooling Fans: 5 X System Fan
IntegratedLANs:
Controller DualIntel82573L®GigabitEthernetcontrollers
IntegratedGraphics:
Controller XGIVolariZ7
GraphicsMemory 16MB SDRAM
MassStorage System 2 x Hot-Swap SATA HDDs (GS-R115V-RH)
2x Internal SATAHDDs (GS-R115L-RH)
1xStandardType FDD
1 x SlimType CD-ROM
OptionalDVDCombo(Optionaldevice)
Chapter 1 Features Summary

10
GS-R115V-RH/GS-R115L-RH Rack Mount Server
Super I/O
Controller ITEIT8718F Super I/O
Built-in I/O 1 x Serial port (COM)
3xUSB 2.0 dual-portconnector(1atfrontpanel)
1 x VGA connector
2 x RJ45 LAN ports
P/S2 Keyboard and Mouse Connectors
1xRJ45portsforconsoleredirection
System BIOS:
BIOS Type Phoenix BIOS on 8Mb flash ROM
Server Management Functions: (Optional device)
BMC Chip H8S IPMI 2.0 controller
FailureDetection IPMI2.0specificationofServer management
EventLogging 32KB Nonvolatile Memory to Log System Failure Events
RemoteManagement Follow the IPMI2.0specificationofServermanagement
Environment
AmbientTemperature OperatingTemperature:5oCto35oC
Non-operatingTemperature:0oCto50oC
RelativeHumidity 10-80%operating Humidity at 30o C
System Dimention: 427.5mm x 521mm x 42.6 mm
Electrical Power Supply SinglePower Supply 300W

11
Hardware Installation Process
Pleaseobservethesafetyinformationinchapter“ImportantSafetyInformation”
Donotexposethe server to extreme environmental conditions. Protect itfromdust,
humidity,andheat.
Step 2-1: Chassis Removal and Installation
Step1 Loosenthethumbscrewfromthebackoftheserver.
Step2 Pushdowntheindentationlocatedattwosidesofthechassis,andslidetowardto removethe
topcover.
Step3 ReverseStep1,and2 toreplacethechassiscover.
Chapter 2 System Hardware Installation
Step 2
Note:Before installing CPU, you must remove the FAN duct. For FANductremoval,please
seeSub-section 2-7“FANDuctRemovaland Installtion”for detailinstruction.
Step 1
Thumbscres

12
GS-R115V-RH/GS-R115L-RH Rack Mount Server
Step 2-2: CPU Installation
PleasemakesuretheCPUtypeandspeedthat aresupportedbythemotherboard.
Step 3
Step 1 Step 2
Step 4
Step1 Raisethemetallockingleveronthesocket.
Step2 Remove theplasticcovering on theCPU socket.
Step3 Liftthemetalcover.
Step4 Insert the CPU with the correct orientation. The CPU only fits in one orientation.
Step5 Once the CPU is properly placed, please replace the metal cover and push themetal
leverbackintolocked position.

13
Hardware Installation Process
Step 2-3: Heat Sink Installation
Step1 PlacetheHeatSinkon the CPU. Before putting theheatsinkontheCPU,please well
remember toapplythethermalconductivitycompoundonthe CPU.
Step2 Seattheheatsinkintheretentionmoduleswiththefourscrews.Installationcompleted.
Step 2-4: Memory Installation
Step 2
Step 1
1. Unlocka DIMM socket by pressingtheretainingclipsoutwards.
2. Alinga DIMMonthesocketsuchthatthenotchon the DIMM exactly matchthenotchesinthe
socket.
3. FirmlyinserttheDIMMintothesocketuntiltheretainingclipssnapbackinplace.
4. When installing the DIMM into the DIMM socket, we recommend to populate one DIMM in
Channel A module and one in Channel B module for best performance.
Pleasenotethateach logical DIMM must be made of two identical DIMMs having the same
device size on each and the same DIMM size.
5.Reversetheinstallationstepswhenyouwishtoremovethe DIMM module.
Retaining Clip

14
GS-R115V-RH/GS-R115L-RH Rack Mount Server
Step 2-5: PCI Expansion Card Installation
GS-R115V-RHprovidesexpansionriserslotsforonePCI-Xfull-height/full-length100/133MHz;andone
withPCI-Ex8slot.Toinstalltheperipheral,pleasegothroughthefollowingsteps.
Note!!BeforeinstallingthePCIexpansioncard,pleasecheckthecard sizelimitation.Sizelimitation
forPCI-Xfull-height/full-lengthis228.5mmx91.5mm;sizelimitationforLow-ProfileCard: 167.5mm
x 56 mm .
Step1 Lifttheriserbracketslightly,thenpullitoutfromtheserverchassis.
Step2 Lossenthescrewontheriserbracket.
Step2 Aligntheexpansioncardwiththeguidinggroove.Slidetheexpansioncardintotheslotuntilthe
cardfirmlyseats.
Step3 Aligntheriserbrackettothesystemmodule(seethearrowdirectionmark1),andpush
ittolockedposition.
Step4 ReverseStep1&2tolocktheriserbracketfirmly.Installationcompleted.
Step 1 Step 2
Step 3 Step 4

15
Hardware Installation Process
Step 2-6: Hard Disk Drive Installation
Step 1 Step 2
Step1 Pressthereleasebuttonandpulltheblankoutofthedrivebay.
Step2 Removethe plasticharddisktray.
Step3 Slideharddiskinto blank and secureitwithscrews.
Step4 Toreplacetheharddriveblank,slidetheblankintothebayuntilitlocksintoplace.Connectcable
andpower.
Step5 Placethehard disk intotheserversystem.
Step 3
GS-R115V-RH

16
GS-R115V-RH/GS-R115L-RH Rack Mount Server
Step1 Lossenthescrewssecuringtheharddriveplate.
Step2 Slidetowardtoremovethe harddriveplatefromsystem.
Step3 Placeharddiskontheplateandlockharddrivewith4screws.
Step4 Replacetheharddriveplate,slidetheblankintothebayuntilitlocksintoplace.ConnectHDD
powercable.
Step5 Reversestep1,2,3 and4tocompletetheHDDinstalltion.
GS-R115L-RH
Step 1
Remove
Step 2

17
Hardware Installation Process
Step 2-7: FAN Duct Removal and Installation
Step1 Pullupthescrew-holderandlossenthethumbscrews.Liftuptoremovethefanduct.
Step2 ForFANDuctInstallation,placethefanductonthetopof heatsinks.Fastenthescrewstothe
lockedpositionandpushdownthescrew-holders.
Step 1 Step 2

18
GS-R115V-RH/GS-R115L-RH Rack Mount Server
4-1:FrontViewof GS-R115V-RH
Chapter 4 Appearance of GS-R115-RH




MOR-DCepyTmilS
sDDHATASpawS-toH
rotcennoCBSU
sDEL
)noitcerideRelosnoCroF(54JR
4-2:FrontViewof GS-R115L-RH
MOR-DCepyTmilS
ypoolFdradnatS
rotcennoCBSU
sDEL
)noitcerideRelosnoCroF(54JR






SystemAppearance
19
4-3:Rear Viewof GS-R115-RH




 
rewoP
troPAGV
troPMOC
tolSresiReliforPwoL
tolSresiRhtgnel-lluF/ezis-lluF
rotcennoCdraobyeK
rotcennoC
esuoM
srotcennoCBSU
stroP2&1NAL

20
GS-R115V-RH/GS-R115L-RH Rack Mount Server
4-4: Switch and LED Indicators Introduction
Power/Sleep
LAN1/2Activities
HDD
Status
Name
Power
Status
HDD
LAN1
Activity
LAN2
Activity
Color Condition Description
Green On Power On
Green Blink Sleep(S1)
-- Off Power Off (S4/S5)
Green On System Ready On/Alarm
Amber Blink SystemReadybut deqraded,DIMM Killed.
Amber On CriticalAlarm:CriticalFANsFailure
-- Off System Not Ready/ Post error/NMI event/
No Power
Green Blink Hard Disk DriveAccess
-- Off No Access and No HDD Fault
Green On LAN Link / No access
Green Blink LAN access
-- Off Idle
Green On LAN Link / No access
Green Blink LAN access
-- Off Idle