Gigabyte GS-SR157L User guide

System Installation Guide
GS-SR157L
1U Rack Mount Server
Intel®PentiumPrescot LGA775 ProcessorServerboard
Rev.1001
25A080-0157L-F00

2
GS-SR157L Rack Mount Server
Table of Content
Safety, Care and Regulatory Information................................................4
Contents Packages ................................................................................8
Introduction..............................................................................................8
WARNING!...............................................................................................8
Chapter 1 Features Summary.................................................................9
Chapter 2 System Overview.................................................................11
Chapter 3 System Hardware Installation ...............................................12
Step 3-1: Chassis Removal and Installation ................................................................ 12
Step 3-2: CPU Installation............................................................................................... 13
Step 3-3: Heat Sink Installation....................................................................................... 14
Step 3-4: Memory Installation ........................................................................................ 14
Step 3-5: PCI Expansion Card Installation.................................................................... 15
Step 3-6: Hard Disk Drive Installation ............................................................................ 16
Step 3-7: FAN Duct Removal and Installation.............................................................. 17
Chapter 4Appearance of GS-SR157L..................................................18
4-1: Front View of GS-SR157L ...................................................................................... 18
4-2: Rear View of GS-SR157L ...................................................................................... 19
4-3: Switch and LED Indicators Introduction ................................................................. 20
4-4: LAN LED Description............................................................................................... 21
4-5 : Connector Icon Description ................................................................................... 22
Chapter 5 Motherboard Layout & Jumper Setting................................23
5-1: GA-8ICXR Motherboard Layout ............................................................................. 23
5-2: Jumper Setting ......................................................................................................... 25

3
Table of Content
Chapter 6 BIOS Setup ..........................................................................26
Main...........................................................................................................28
Advanced Processor Options ........................................................................................ 31
Advanced ...................................................................................................32
Memory Configuration..................................................................................................... 33
PCI Configuration............................................................................................................. 34
I/O Device Configuration................................................................................................. 36
Advanced Chipset Control ............................................................................................. 40
Security ......................................................................................................43
Server.........................................................................................................45
System Management...................................................................................................... 48
Console Redirection........................................................................................................ 49
Boot............................................................................................................52
Exit .............................................................................................................53
7-1: Acronyms................................................................................................................. 56
Chapter 7Appendix..............................................................................56

4
GS-SR157L Rack Mount Server
Safety, Care and Regulatory Information
Important safety information
Readandfollowallinstructionsmarkedontheproductandinthedocumentationbeforeyouoperate
yoursystem.Retainallsafetyandoperatinginstructionsforfutureuse.
*Theproductshouldbeoperatedonlyfromthetypeofpowersourceindicatedontheratinglabel.
*Ifyourcomputerhasavoltageselectorswitch,makesurethattheswitchisintheproper position for
yourarea.Thevoltageselectorswitchissetatthefactorytothecorrectvoltage.
*Theplug-socketcombinationmustbeaccessibleatalltimesbecauseitservesasthemaindisconnect-
ingdevice.
*Allproductshippedwithathree-wireelectricalgrounding-typeplugonlyfitsintoagrounding-typepower
outlet.Thisisasafetyfeature.Theequipmentgroundingshouldbeinaccordancewithlocalandnational
electricalcodes.Theequipmentoperatessafelywhenitisusedinaccordancewithitsmarkedelectrical
ratingsandproductusageinstructions
*Donotusethisproductnearwateroraheatsource.
*Setuptheproductonastableworksurfaceorsoas to ensure stabilityofthesystem.
*Openingsinthecaseareprovidedforventilation.Donotblockorcovertheseopenings.Makesureyou
provideadequatespacearoundthesystemforventilationwhenyousetupyourworkarea.Neverinsert
objectsofanykindintotheventilationopenings.
*To avoid electrical shock,always unplug allpower cables and modem cables from the wall outlets
beforeremovingcovers.
*Allowtheproducttocoolbeforeremovingcoversortouchinginternalcomponents.
Precaution for Product with Laser Devices
Observethefollowingprecautionsforlaserdevices:
*DonotopentheCD-ROMdrive,makeadjustments,orperformprocedures onalaserdeviceotherthan
thosespecifiedintheproduct'sdocumentation.
*Onlyauthorizedservicetechniciansshouldrepairlaserdevices.
Precaution for Product with Modems, Telecommunications, ot Local Area
Network Options
Observethefollowingguidelineswhenworkingwithoptions:
*Donotconnectoruseamodemortelephoneduringalightningstorm.Theremaybeariskofelectrical
shockfromlightning.

5
SafetyInformation
*Toreducetherisk of fire, useonlyNo.26AWGorlargertelecommunicationslinecord.
*Donotplugamodemortelephonecableintothenetworkinterfacecontroller(NIC)receptacle.
* Disconnect the modem cable before opening a product enclosure, touching or installing internal
components,ortouchinganuninsulatedmodemcableorjack.
*Donotuseatelephonelineto report agasleakwhileyouareinthe vicinity of theleak.
Federal Communications Commission (FCC) Statement
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,
pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterference whenthe equipmentis operatedin acommercial environment. This equipment
generates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewith
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
requiredtocorrecttheinterferenceathisownexpense.
Properlyshieldedandgroundedcablesandconnectorsmustbeusedin order to meet FCCemission
limits.Neithertheprovidernorthemanufacturerareresponsibleforanyradioortelevisioninterference
caused by using other than recommended cables and connectors or by unauthorized changes or
modificationstothisequipment.Unauthorizedchangesormodificationscouldvoidtheuser'sauthorityto
operatetheequipment.
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired
operation.
FCC part 68 (applicable to products fitted with USA modems)
ThemodemcomplieswithPart68oftheFCCRules.Onthisequipmentisalabelthatcontains,among
otherinformation,theFCCregistrationnumberandRingerEquivalenceNumber(REN)forthisequipment.
Youmust,uponrequest,providethisinformationtoyourtelephonecompany.
If your telephone equipment causes harm to the telephone network, the Telephone Company may
discontinueyourservicetemporarily.Ifpossible,theywillnotifyinadvance.But,ifadvancenoticeisnot
practical,youwillbenotifiedassoonaspossible.Youwillbeinformedofyourrighttofileacomplaintwith
the FCC.

6
GS-SR157L Rack Mount Server
Yourtelephonecompanymaymakechangesinitsfacilities,equipment,operations,orproceduresthat
couldaffectproperoperationofyourequipment.Iftheydo,youwillbenotifiedinadvancetogiveyouan
opportunitytomaintainuninterruptedtelephoneservice.
TheFCCprohibitsthisequipmenttobeconnectedtopartylinesorcoin-telephoneservice.
TheFCCalsorequiresthetransmitterofaFAXtransmissionbeproperlyidentified(perFCCRulesPart
68,Sec. 68.381 (c)(3)).
/for Canadianusers only/
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatusassetoutintheradiointerferenceregulationsofIndustryCanada.
Lepresentappareilnumeriquen'emetpasdebruitsradioelectriquesdepassantleslimitesapplicablesaux
appareilsnumeriquesdeClasseBprescritesdanslereglementsurlebrouillageradioelectriqueedictepar
IndustrieCanada.
DOC notice (for products fitted with an Industry Canada-compliant modem)
TheCanadianDepartmentofCommunicationslabelidentifiescertifiedequipment.Thiscertification
meansthattheequipmentmeetscertaintelecommunicationsnetworkprotective,operationalandsafety
requirements.TheDepartmentdoesnotguaranteetheequipmentwilloperatetotheusersatisfaction.
Beforeinstallingthisequipment,usersensurethatitispermissibletobeconnectedtothefacilitiesofthe
localTelecommunicationsCompany.Theequipmentmustalsobeinstalledusinganacceptablemethod
ofconnection.Thecustomershouldbeawarethatcompliancewiththeaboveconditionsmightnotprevent
degradationofserviceinsomesituations.
RepairstocertifiedequipmentshouldbemadebyanauthorizedCanadianmaintenancefacilitydesignated
bythesupplier.Anyrepairsoralterationsmadebytheusertothisequipment,orequipmentmalfunctions,
maygivethetelecommunicationscompanycausetorequesttheusertodisconnecttheequipment.
Usersshouldensurefortheirownprotectionthattheelectricalgroundconnectionsofthepowerutility,
telephonelinesandinternalmetallicwaterpipesystem,ifresentareconnectedtogether.Thisprecaution
maybeparticularlyimportantinruralareas.
Caution: Users should not attempt to make such connections themselves, but should contact the
appropriateelectricinspectionauthority,orelectrician,asappropriate.

7
SafetyInformation
NOTICE:TheLoadNumber(LN)assignedtoeachterminaldevicedenotesthepercentageofthetotal
load to be connected to a telephone loop which is used by the device, to prevent overloading. The
terminationonaloopmayconsistofanycombinationofdevicessubjectonlytotherequirementthatthe
sumoftheLoadNumbersofallthedevicesdoesnotexceed100.
/forEuropean usersonly /
CAUTION
Dangerofexplosionifbatteryisincorrectly
replaced.
Replaceonlywiththesameorequivalent
typerecommendedbythemanufacturer.
Disposeofusedbatteriesaccordingtothe
manufacturer’sinstructions.

8
GS-SR157L Rack Mount Server
;Chassis ;GA-8ICXRMotherboard(Installed)
;PowerSupply(Installed) ;GSMT User’s Manual
;FAN Duct x 1 ;CPU Heat Sink x 1
;StandardFloppyDrive(Installed) ;Silm type CD-ROM drive (Installed)
;Cables(RJ45) ;GS-SR157LSystemInstallationGuide
;Case Handle Kit x 2 ;DriverCDformotherboarddriver &utility
;Driver CD for IPMI
Introduction
WelcometoGigabyteGS-SR157LRackmountServerSystemInstallationGuide.Theguide
providesinstructionsforconfigurationhardwarefortheGS-SR157Lyoursystem.
Thisinstallationguidewillassistyouininstallingalltheessentialcomponentsfortheseversystem.
Foryourprotection,pleasereadandundertandallofthesafetyandoperatinginstructionsregardingyour
GigabyteServerandretainforfuturereference.Theproceduresinthisguidebookassusmethatyourare
asystemornetworkadministratorexperiencedininstallingsimilarhardware.
Contents Packages
Whenopeningthepackage,pleaseensure thesystemcomponentsarenotdamagedduringtheshipping.
Using the following checklist to verify the contents. If any component is missing or damaged in the
system,pleasecontactyourvendorimmediately.
Computermotherboards and expansion cards containvery delicateIntegrated Circuit (IC) chips.To
protectthemagainstdamagefromstaticelectricity,youshouldfollowsomeprecautionswheneveryou
workonyourcomputer.
1. Unplugyourcomputerwhenworkingontheinside.
2. Useagroundedwriststrapbeforehandlingcomputercomponents.Ifyoudonothave
one,touchbothofyourhandstoasafelygroundedobjectortoametalobject,suchas
the powersupply case.
3. HoldcomponentsbytheedgesandtrynottouchtheICchips,leadsorconnectors,or
othercomponents.
4. Placecomponentsonagroundedantistaticpadoronthebagthatcamewiththe
componentswheneverthecomponentsareseparatedfromthesystem.
5. EnsurethattheATXpowersupplyisswitchedoffbeforeyoupluginorremovetheATX
powerconnectoronthemotherboard.
WARNING!

9
FeatureSummary
Motherboard GA-8ICXR
Processor Supported SupportsIntel®PentiumPrescotLGA775processor
Intel®PrescotLGA775 supports 800MHzFSB
L2cacheon-dieperprocessorfrom1M
Chipset Intel®MCH E7221 Chipset
Intel®6702PXH-V
Intel®ICH6R
SystemMemory:
Memory Capacity 4 x DDR socket up to 4 GB
MemoryType Un-bufferedDDR333/400
DIMM Size Support 256MB, 512MB, and 1GB memory
ErrorCorrection: Single-bitErrorsCorrection,MultipleBitErrorsDetection
Expansion Slot 1Butter-FlyRisercardsupports2x 64/66~100MHzadd-oncards
(3.3V)
1xLowProfile PCI add-oncard(Half-High/Half-Length)
1xFull-Sizeadd-oncard(Full-High/Half-Length)
ATA RAID controller ICH6R
SupportsdualportsSATARAID 0,1
Cooling Fans: 4 X System Fan
1X Power Fan
IntegratedLANs:
Controller DualIntel®82541GIGbE
Feature WOL
IntegratedGraphics:
Controller Integrated,ATIRage-XL
GraphicsMemory 8MB SDRAM
MassStorageSystem 2 x Internal SATA HDD
1x StandardTypeFDD
1 Slim Type CD-ROM
OptionalDVDCombo
Chapter 1 Features Summary

10
GS-SR157L Rack Mount Server
Super I/O
Controller ITEIT8712F-A SuperI/O
Built-in I/O 1 x Serial port (COM)
1xUSB 2.0 dual-portconnector
1x VGAconnector
2 x RJ45 LAN ports
P/S2 Keyboardand Mouse Connectors
1xRJ45onfrontforconsoleredirection
System BIOS:
BIOS Type Phoenix®BIOS,Multi-bootBBS1.0Compliant4MbFlashMemory
SpecialFeatures BIOSHWMonitoringreporting(The valuesmonitoredbyHW
Monitoringchipset)
ConsoleRedirection via COMports
Intel®HyperThreadingSupport
ResumeafterAC Back
Wake On LAN
ACPI 1.0 Compliant/ACPI defined S1, S4, and S5
Server Management Functions: (Optional)
BMC Chip NS IPMI 1.5 controller
FailureDetection IPMI1.5specificationofServermanagement
EventLogging 32KB NonvolatileMemory to Log System FailureEvents
RemoteManagement FollowtheIPMI1.5specificationofServermanagement
Environment
AmbientTemperature OperatingTemperature:5oCto35oC
Non-operatingTemperature:0oCto50oC
RelativeHumidity 10-80%operatingHumidity at 30oC
SafetyRegulations FCC, CE, BSMI, CB, Win2000, 2003 WHQLIPMI 1.5 ( Option)
System Dimention: 427.5mmx 521mm x 42.6 mm
Electrical Power Supply SinglePower Supply 250W

11
System Overview
Chapter 2 System Overview
A
B
C
D
E
F
G
H
H
I
G
J
D
A. ChassisCover F. ZCR Slot
B. Motehrboard - GA-8ICXR G. HDD Plate
C. Heat Sink H.HDD
D. System Fans I. FDD
E. Riser Card Support J. Power

12
GS-SR157L Rack Mount Server
Pleaseobservethesafetyinformationinchapter“ImportantSafetyInformation”
Donotexposethe servertoextreme environmentalconditions. Protect itfromdust,
humidity,andheat.
Step 3-1: Chassis Removal and Installation
Step1 Loosenthethumbscrewfromthebackoftheserver.
Step2 Pushdowntheindentationlocatedattwosidesofthechassis,andslidetowardto removethe
topcover.
Step3 ReverseStep1,and2 to replacethechassis cover.
Chapter 3 System Hardware Installation
Step 2
Note:BeforeinstallingCPU, you mustremovethe FANduct.ForFANductremoval,please
seeSub-section3-7“FANDuctRemovalandInstalltion”fordetailinstruction.
Step 1
Thumbscres

13
Hardware Installation Process
Step 3-2: CPU Installation
PleasemakesuretheCPUtypeandspeedthat aresupportedbythemotherboard.
Step 3
Step 1 Step 2
Step1 GentlyliftthemetalleverlocatedontheCPUsockettotheupper-rightposition.
Step2 Remove theplastic covering on the CPUsocket.
Step3 AligntheindentedcorneroftheCPUwiththetriangleandgentlyinserttheCPUintoposition.
(GraspingtheCPUfirmlybetweenyourthumbandforefinger,carefullyplaceitintothesocket
inastraightanddownwardsmotion.Avoidtwistingorbendingmotionsthatmightcause
damagetotheCPUduringinstallation.)
Step4 Oncethe CPU isproperlyinserted,pleasereplacetheplastic covering andpushthemetal
leverbackintoitsoriginalposition.
Step5 Close the lever, reverse step 1 & 2.
Step 4

14
GS-SR157L Rack Mount Server
Step 3-3: Heat Sink Installation
Step1 PlacetheHeatSink on theCPU. Beforeputtingthe heatsinkon theCPU, please well
remember toapplythethermalconductivitycompoundontheCPU.
Step2 Seattheheatsinkintheretentionmoduleswiththefourscrews.Installationcompleted.
Step 3-4: Memory Installation
1. TheDIMMslot has anotch, so theDIMM memory modulecan onlyfitin onedirection.
2. InserttheDIMM memorymodulevertically intothe DIMMslot.Then pushit down.
3. Closetheplasticclipatboth edges oftheDIMMslotstolock the DIMMmodule.
4. When installing the DIMM into the DIMM module, we recommend to populate one DIMM in
Channel A module and one in Channel B module for best performance.
Pleasenote that each logicalDIMM must be made oftwo identical DIMMs havingthe same
device size on each and the same DIMM size.
5.Reversethe installationstepswhen you wishto remove theDIMMmodule.
Step 2
Step 1

15
Hardware Installation Process
Step 3-5: PCI Expansion Card Installation
GS-SR157LprovidesexpansionriserslotsforonePCI-Xfull-height/full-length64/66~100MHz;andone
withPCI-Xlow-profile64-Bit/66~100MHz.Toinstalltheperipheral,pleasegothroughthefollowingsteps.
Note!!BeforeinstallingthePCIexpansioncard,pleasecheckthecard sizelimitation.Sizelimitation
forPCI-Xfull-height/full-lengthis228.5mmx91.5mm;sizelimitationforLow-ProfileCard: 167.5mm
x 56 mm .
Step1 Loosentheriserbracket screws.
Step2 Lifttheriserbracketslightly,thenpullitoutfromtheserverchassis.
Step3 Aligntheexpansioncardwiththeguidinggroove.Slidetheexpansioncardintotheslotuntilthe
cardfirmlyseats.
Step4 Aligntheriserbrackettothesystemmodule(seethearrowdirectionmark1),andpush
ittolockedposition.
Step5 ReverseStep1 & 2tolocktheriserbracketfirmly.Installationcompleted.
Step 1 Step 2
Step 3 Step 4

16
GS-SR157L Rack Mount Server
Step 3-6: Hard Disk Drive Installation
Step1 Lossenthescrewssecuringtheharddriveplate.
Step2 Slidetowardtoremovetheharddriveplatefromsystem.
Step3 Placeharddiskonthe plateandlock hard drivewith4 screws.
Step4 Replacetheharddriveplate,slidetheblankintothebayuntilitlocksintoplace.ConnectHDD
powercable.
Step5 Reversestep1,2,3and4to complete the HDD installtion.
Step 1
Step 4
Step 2
Step 3
Remove

17
Hardware Installation Process
Step 3-7: FAN Duct Removal and Installation
Step1 Pullupthescrew-holderandlossenthethumbscrews.Liftuptoremovethefanduct.
Step2 ForFANDuctInstallation,placethefanductonthetopof heatsinks.Fastenthescrewstothe
lockedpositionandpushdownthescrew-holders.
Step 1 Step 2

18
GS-SR157L Rack Mount Server
4-1: Front View of GS-SR157L
Chapter 4 Appearance of GS-SR157L




MOR-DCepyTmilS
ypoolFdradnatS
rotcennoCBSU
sDEL
)noitcerideRelosnoCroF(54JR

SystemAppearance
19
4-2: Rear View of GS-SR157L




 
rewoP
troPAGV
troPMOC
tolSresiReliforPwoL
tolSresiRhtgnel-lluF/ezis-lluF
rotcennoCdraobyeK
rotcennoC
esuoM
srotcennoCBSU
stroP2&1NAL

20
GS-SR157L Rack Mount Server
4-3: Switch and LED Indicators Introduction
Power/Sleep
NMI LAN1/2Activities
HDD
Status HDD Fail Warning
ID
Name
Power
Status
HDD
LAN1
Activity
LAN2
Activity
Identification
Color Condition Description
Green On Power On
Green Blink Sleep(S1)
-- Off Power Off (S4/S5)
Green On System Ready On/Alarm
Amber Blink SystemReady butdeqraded, CPUFailed,
DIMM Killed.
Amber On CriticalAlarm:CriticalPower ModuleFailure,
CriticalFANsFailure, Voltage(PowerSupply)
CriticalTemperatureandVoltage
-- Off System Not Ready/ Post error/NMI event/CPU
orterminatormissing
Green Blink Hard Disk DriveAccess
Amber On HDDFault
-- Off NoAccess and No HDD Fault
Green On LAN Link / No access
Green Blink LAN access
-- Off Idle
Green On LAN Link / No access
Green Blink LAN access
-- Off Idle
Blue Blink Unitselectedforidentification
-- Off Noidentification