GIGAMEDIA GGM HDCPLKIT User manual
Please read b elo w safe ty in struct io n s carefully b efo re inst allatio n an d
o p erat io n :
1. Please pay attentio n to all the warning s and hints o n this d evice.
2 . D o n o t exp o se th is un it to rain, m o isture an d liq u id .
3. Do no t p ut any stuff into the d ev ice.
4 . D o n o t rep air th e d ev ice o r o p en the enclo sure w it ho ut p rofessio nal
p erso n g u id an ce t o av o id ele ctro n ic sh o ck .
5 . M ake su re g o o d v entilatio n o p e ning s to av o id p ro d uct o v erhe at in g
damag e.
6. Shut o ff po w er and make sure en v iro n men t is saf e b efo re in stallatio n .
7 . D o n o t p lu g-in / o ut th e n et wo rk cab les and IR cab les when it is in
using to av o id cab les damag e.
8. M ake sure the sp ecificatio n matched if using 3 party DC ad ap ters.
• Im p o rtan t saf ety n o tice
rd
• In t ro d uctio n
• Packag e co nten ts
Th an k y o u fo r p urch asin g this p ro d uct . Fo r o p timu m p e rfo rm an ce a nd
safety, please read the instructio ns carefully and keep the manual fo r
future reference.
• Featu res
1. It use p o werline to transmit signal, and can b e co nnected where there
is o u tlet, elimina tin g t he w irin g o f n etw o rk cab le o r H D M I Cab le.
2 . In put v o ltag e: A C 1 0 0~ 2 40 V .
3 . It can ex te nd s 1 0 80 P@ 6 0H z sig nal up to 3 00 M u nd er th e co n d it io n
o f fluen t elect ric p o w er en v iro nme nt.
4. It supp o rts IR p ass back .
5 . Sup p o rt s H DM I lo o p o utp ut fro m T X
6. Firep roo f raw material is used to ensure safety and reliab ility.
7. Easy setup , p lug and p lay .
H D M I Ex tend er T X
se n d e r*1 p c
H D M I Ex tend er RX
re ce iv e r*1 p c
A C 1 0 0 -2 4 0 V
p o w er li ne *2 p cs
I R b laster exten sio n
cab le *1 p c
I R receiv er exte n sio n
cab le *1 p c
U se r m a n u al*1 p c
1. HDM I so urce dev ice (DV D, PS3, Set to p bo x, PC etc).
2 . H DM I d isp lay d ev ice like SDT V, H DT V, an d p ro jecto r w it h H DM I p o rt .
3 . A C 1 00 ~ 24 0 V Po wer inp u t.
• In st allat io n Req u irem en t
• Panel d escrip tio n
This HDMI powerline extender applies the H D BitT t ransm issio n protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric meter, it just needs to connect
transmitt er and receiv er .Pow er them on and they can match automatically .
Plug and play design giv es user s ver y convenient and por table connection.
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
Reset Press reset button to r estart the device
Power input Connect with A C100~240V power line
HDMI output
IR blaster extension
cable inter face
Connect with IR blaster extension cable. Please put the IR blaster
close to s ource d evice t o b est transmit t he IR signal from receiver
2. HDMI Extender RX receiver
Specification
HDMI signal Full comp atible with HDCP
Suppor t resolution 4 8 0 i@ 6 0 H z , 4 8 0 p @ 6 0 H z , 5 7 6 i @ 5 0 H z, 5 7 6 p @ 5 0 H z ,
7 2 0 p @ 5 0 / 6 0 H z , 1 0 8 0 i @ 5 0 / 6 0 H z , 1 0 8 0 p @ 5 0 / 6 0 H z
Transmit distance
It e xte nd s 1 0 8 0P@ 6 0 Hz sig n al up t o 3 0 0 m et ers in g o o d
ele ct ric p o w er env iro n me nt .
W orking temperatur e 0 60
Input voltage AC 100240V
Power consumption TX: 7.5W; RX: 7W
Product dimension
W eight
Color
Items
Black
Enclosure material fireproo f engineering plastics
Transpor t pr otocol HDbitT
• Co n nect io n
• FA Q
Q: TV display “waiting for connection… ” on the bott om right corner?
A: Please check if the pow er supply of TX (sender) is well connect ed and the
pow er indicat or led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX .
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
• Sp ecificat io n
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
Reset Press reset button to r estart the device
Power input Connect with A C100~240V power line
IR r eceiv er extension
cable int erface
Connect with IR r eceiver extension cable. Please mak e sure the
remote contr ol is within the r equir ed range o f IR receiver .
HDMI output Connect with HDMI display device
1. HDMI Extender TX sender
Q: Display not fluent and stable?
A: 1) Please check if the pow erline is arranged smooth and If the pow eline
length is ov er the limitation of this product.
2) Please check if the pow erline capacity is ov er loaded
3) Please check if there is electricity int erruption equipment. And it is
advised to plug in wall outlet and avoid using pow er charger and
pow er adapt er.
IR remote contr ol Sup p o rt 2 0~ 6 0 kH z I R rem o te d ev ice
15 0 (W ) x 9 2.7 (D) x 2 5 (H) m m *2p cs
TX : 3 30 g R X : 31 6g
TV
D V D
TV
Se n d er
Receiv er
IR O U T
IR IN
Powerline
HDMI cable
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input Connect with HDMI sour ce device
Connect with HDMI display device
N o t e: Th e t ra n sm i ssi o n d i sta nce m ay v a ry i n d i f f ere n t
elect ric p o w er e nv iro n men t.
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA:
http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be
thrown in the trash or dumped. Substances in the product may be hazardous to human health
or the environment. Disposal may be done by returning the product to your dealer or leaving it
a collection point provided for this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD
2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has been assessed in
accordance with applicable standards in effect.
NETWORKING
EQUIPMENT
www.gigamedia.net
USER
MANUAL
GGM HDCPLKIT
HDbitT HDMI Extender over Powerline
Please read b elo w safet y in stru ctio ns carefu lly b efo re installat io n an d
o p erat io n :
1. Please pay attentio n to all the warning s and hints o n this d ev ice.
2 . D o no t exp o se th is unit to rain , m o ist ure an d liq uid .
3. Do no t put any stuff into the d ev ice.
4 . D o no t rep air the d ev ice o r o p en the enclo sure w itho ut p ro fessio n al
p erso n g u id an ce to av o id e lectro n ic sho ck .
5 . M ake sure g o o d ventilatio n o p ening s to av o id p ro d uct o v erh eatin g
damag e.
6. Shut o ff p o w er and make sure en viro nm en t is safe b efo re installatio n.
7 . D o no t p lug -in/ o ut the n et wo rk cab les and IR cab les when it is in
using to avo id cab les damag e.
8. M ake sure the sp ecificatio n matched if using 3 party D C ad apters.
• Im p o rt an t saf ety n o tice
rd
• Int ro d uct io n
• Packag e co n ten ts
Th an k y o u fo r p urch asing th is p ro d uct. Fo r o p timum p erfo rman ce an d
safety, please read the instructio ns carefully and keep the manual fo r
future reference.
• Feat u res
1. It use p o werline to transmit sig nal, and can b e co nnected where there
is o ut let, e lim in at in g t he w iring o f n etw o rk cab le o r HD M I Cab le .
2 . Inp ut vo ltag e: A C 1 00 ~ 2 40 V .
3 . It can e xte nd s 10 80 P@ 6 0H z sig nal up to 3 00 M u nd er the co nd itio n
o f f luent elect ric p o wer en v iro nment.
4. It sup p o rts IR p ass b ack .
5 . Su pp o rt s H DM I lo o p o ut p ut fro m TX
6. Firep ro of raw material is used to ensure safety and reliab ility.
7. Easy setup , p lug and p lay .
H D M I Ex t e n d e r T X
se n d e r*1 p c
H D M I Ex t e n d er RX
re ce iv e r*1 p c
A C 1 0 0 - 2 4 0 V
p o w er lin e*2 p cs
I R b laster extensio n
cab le *1 p c
I R re ceiv er exten sio n
cab le *1 p c
U se r m a nu a l*1 p c
1. HD M I so urce d ev ice (D V D, PS3 , Set to p b ox, PC etc).
2 . H DM I d isp lay d ev ice like SDT V, HDT V, and p ro je cto r w it h H D M I p o rt .
3 . A C 1 00 ~ 24 0V Po we r in p ut.
• Inst allat io n Req u irem en t
• Pan el d escrip t io n
This HDMI powerline extender applies the H D BitT transmissio n protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric meter, it just needs to connect
transmitt er and receiv er .Pow er them on and they can match automatically .
Plug and play design giv es users ver y convenient and por table connection.
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
P ower input Connect with A C100~240V power line
HDMI output
IR blaster extension
cable inter face
Connect with IR blaster extension cable. Please put the IR blaster
close to s ource d evice to b est transmit the IR signal from receiver
2. HDMI Extender RX receiver
Specification
HDMI signal Full comp atible with HDCP
Suppor t resolution 4 8 0 i @ 6 0 H z , 4 8 0 p @ 6 0 H z , 5 7 6 i@ 5 0 H z , 5 7 6 p @ 5 0 H z ,
7 2 0 p @ 5 0 / 6 0 H z , 1 0 8 0 i @ 5 0 / 6 0 H z , 1 0 8 0 p @ 5 0 / 6 0 H z
Transmit distance
It e xt en d s 1 0 8 0P@ 6 0H z si g nal u p t o 3 00 m ete rs i n g o o d
ele ct ric p o w er en viro nm en t.
W orking temperatur e 0 60
Input voltage AC 100240V
Power consumption TX: 7.5W; RX: 7W
Product dimension
W eight
Color
Items
Black
Enclosure material fireproo f engineering plastics
Transpor t pr otocol HDbitT
• C o n nectio n
• FA Q
Q: TV display “waiting for connection… ” on the bott om right corner?
A: Please check if the pow er supply of TX (sender) is well connect ed and the
pow er indicat or led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX .
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
• Sp ecificatio n
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
P ower input Connect with A C100~240V power line
IR r eceiv er extension
cable int erface
Connect with IR r eceiver extension cable. Please mak e sure the
remote contr ol is within the r equir ed range o f IR receiver .
HDMI output Connect with HDMI display device
1. HDMI Extender TX sender
Q: Display not fluent and stable?
A: 1) Please check if the pow erline is arranged smooth and If the pow eline
length is ov er the limitation of this product.
2) Please check if the pow erline capacity is ov er loaded
3) Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using pow er charger and
pow er adapt er.
IR remote contr ol Su p p o rt 2 0~ 6 0 kH z I R remo te d ev ice
150(W ) x 9 2.7(D ) x 2 5(H ) m m *2p cs
TX : 33 0g R X : 31 6g
TV
D V D
TV
Se n d er
Receiver
IR O U T
IR IN
Powerline
HDMI cable
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input Connect with HDMI sour ce device
Connect with HDMI display device
N o t e: T he t ra n sm i ssi o n d ist an ce m ay v ary in d i f f e re n t
ele ct ric p o w e r en v iro nm ent .
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA:
http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be
thrown in the trash or dumped. Substances in the product may be hazardous to human health
or the environment. Disposal may be done by returning the product to your dealer or leaving it
a collection point provided for this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD
2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has been assessed in
accordance with applicable standards in effect.
NETWORKING
EQUIPMENT
www.gigamedia.net
USER
MANUAL
GGM HDCPLKIT
HDbitT HDMI Extender over Powerline
Please read b elo w safe ty in stru ctio n s carefu lly b ef o re in stallat io n and
o p erat io n :
1. Please p ay attentio n to all the warning s and hints o n this d ev ice.
2 . D o no t exp o se t his un it to rain , m o isture and liq uid .
3. Do no t p ut any stuff into the d evice.
4 . D o no t rep air th e d ev ice o r o p en t he en clo su re w it ho u t p ro fe ssio n al
p e rso n g u id an ce to av o id e lect ro nic sh o ck.
5 . M ake sure g o o d v en tilatio n o p en in g s to av o id p ro d uct o v erh eatin g
d amag e.
6. Shut o ff p o wer and make sure env iro nm ent is saf e b ef o re installat io n .
7 . D o no t p lu g -in/ o ut t he ne tw o rk cab les and IR cab les w hen it is in
using to av o id cab les damag e.
8. M ake sure the sp ecificatio n matched if using 3 p arty DC ad ap ters.
• Im p o rt an t safet y n o tice
rd
• In tro d uct io n
• Packag e co ntents
Th an k y o u f o r p urch asin g t his p ro d uct . Fo r o p timum p erfo rm ance and
safety, please read the instructio ns carefully and keep the manual fo r
future reference.
• Featu res
1. It use p o werline to transmit sig nal, and can b e co nnected where there
is o ut let, elim in at in g the w irin g o f net wo rk cab le o r HD M I Cab le.
2 . In p ut v o ltag e: A C 10 0~ 2 4 0V .
3 . It can ext end s 1 08 0P@ 6 0H z sig nal up to 3 00 M u nd er th e co n d itio n
of f luent ele ctric p o w er env iro n ment .
4. It sup p o rts IR p ass back .
5 . Sup p o rts H D M I lo o p o ut p ut fro m TX
6. Firep ro o f raw material is used to ensure safety and reliab ility.
7. Easy setup , p lug and p lay .
H D M I Ex t e n d er TX
se n d e r*1 p c
H D M I Ex t e n d e r RX
re ce iv e r*1 p c
A C 1 0 0 - 2 4 0 V
p o w er li ne *2 p cs
I R b laster exten sio n
cab le *1 p c
I R re ceiv er extensio n
cab le *1 p c
U se r m a n u al*1 p c
1. HD M I so urce d ev ice (DV D, PS3, Set to p b o x, PC etc).
2 . H DM I d isp lay d ev ice like SDT V, H DTV, an d p ro jecto r with HD M I p o rt.
3 . A C 1 00 ~ 2 40 V Po wer inp ut .
• In stallatio n Req u irem en t
• Pan el d escrip t io n
This HDMI powerline extender applies the H D Bit T t ran smissio n protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric met er, it just needs to connect
transmitt er and receiv er .Pow er them on and they can match automatically .
Plug and play design giv es user s ver y convenient and por table connection.
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
HDMI output
IR blaster extension
cable inter face
Connect with IR blaster extension cable. Please put the IR blaster
close to source d evice t o b est transmit t he IR signal from receiver
2. HDMI Extender RX receiver
Specification
HDMI signal Full comp atible with HDCP
Suppor t resolution 4 8 0 i @ 6 0 H z , 4 8 0 p @ 6 0 H z , 5 7 6 i @ 5 0 H z, 5 7 6 p @ 5 0 H z ,
7 2 0 p @ 5 0 / 6 0 H z , 1 0 8 0 i @ 5 0 / 6 0 H z , 1 0 8 0 p @ 5 0 / 6 0 H z
Transmit distance
It e xt en d s 1 0 80 P@ 6 0 Hz sig n al u p to 3 0 0 m ete rs in g o o d
ele ct ric p o w er e nv iro n me nt .
W orking temperatur e 0 60
Input voltage AC 100240V
Power consumption TX: 7.5W; RX: 7W
Product dimension
W eight
Color
Items
Black
Enclosure material fireproo f engineering plastics
Transpor t pr otocol HDbitT
• Co n nectio n
• FA Q
Q: TV display “waiting for connection… ” on the bott om right corner?
A: Please check if the pow er supply of TX (sender) is well connect ed and the
pow er indicat or led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX .
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
• Sp ecif icatio n
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
IR r eceiv er ext ension
cable int erface
Connect with IR r eceiver extension cable. Please mak e sure the
remote contr ol is within the r equir ed range o f IR receiver .
HDMI output Connect with HDMI display device
1. HDMI Extender TX sender
Q: Display not fluent and stable?
A: 1) Please check if the pow erline is arranged smooth and If the pow eline
length is ov er the limitation of this product.
2) Please check if the pow erline capacity is ov er loaded
3) Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using pow er charger and
pow er adapt er.
IR remote contr ol Sup p o rt 2 0 ~ 6 0kHz I R rem o t e d e v ice
150 (W ) x 9 2.7(D ) x 2 5(H ) m m *2 p cs
TX : 3 3 0g R X : 31 6g
TV
D V D
TV
Se n d er
Receiver
IR O U T
IR IN
Powerline
HDMI cable
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input Connect with HDMI sour ce device
Connect with HDMI display device
N o t e: Th e t ra n sm i ssi o n d i sta nce m ay v a ry in d i f f e re n t
ele ct ric p o w e r env iro n me nt.
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA:
http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be
thrown in the trash or dumped. Substances in the product may be hazardous to human health
or the environment. Disposal may be done by returning the product to your dealer or leaving it
a collection point provided for this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD
2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has been assessed in
accordance with applicable standards in effect.
NETWORKING
EQUIPMENT
www.gigamedia.net
USER
MANUAL
GGM HDCPLKIT
HDbitT HDMI Extender over Powerline
Please read b elo w safe ty in stru ctio n s carefu lly b ef o re in stallat io n and
o p erat io n :
1. Please p ay attentio n to all the warning s and hints o n this d ev ice.
2 . D o no t exp o se t his un it to rain , m o isture and liq uid .
3. Do no t p ut any stuff into the d evice.
4 . D o no t rep air th e d ev ice o r o p en t he en clo su re w it ho u t p ro fe ssio n al
p e rso n g u id an ce to av o id e lect ro nic sh o ck.
5 . M ake sure g o o d v en tilatio n o p en in g s to av o id p ro d uct o v erh eatin g
d amag e.
6. Shut o ff p o wer and make sure env iro nm ent is saf e b ef o re installat io n .
7 . D o no t p lu g -in/ o ut t he ne tw o rk cab les and IR cab les w hen it is in
using to av o id cab les damag e.
8. M ake sure the sp ecificatio n matched if using 3 p arty DC ad ap ters.
• Im p o rt an t safet y n o tice
rd
• In tro d uct io n
• Packag e co ntents
Th an k y o u f o r p urch asin g t his p ro d uct . Fo r o p timum p erfo rm ance and
safety, please read the instructio ns carefully and keep the manual fo r
future reference.
• Featu res
1. It use p o werline to transmit sig nal, and can b e co nnected where there
is o ut let, elim in at in g the w irin g o f net wo rk cab le o r HD M I Cab le.
2 . In p ut v o ltag e: A C 10 0~ 2 4 0V .
3 . It can ext end s 1 08 0P@ 6 0H z sig nal up to 3 00 M u nd er th e co n d itio n
of f luent ele ctric p o w er env iro n ment .
4. It sup p o rts IR p ass back .
5 . Sup p o rts H D M I lo o p o ut p ut fro m TX
6. Firep ro o f raw material is used to ensure safety and reliab ility.
7. Easy setup , p lug and p lay .
H D M I Ex t e n d er TX
se n d e r*1 p c
H D M I Ex t e n d e r RX
re ce iv e r*1 p c
A C 1 0 0 - 2 4 0 V
p o w er li ne *2 p cs
I R b laster exten sio n
cab le *1 p c
I R re ceiv er extensio n
cab le *1 p c
U se r m a n u al*1 p c
1. HD M I so urce d ev ice (DV D, PS3, Set to p b o x, PC etc).
2 . H DM I d isp lay d ev ice like SDT V, H DTV, an d p ro jecto r with HD M I p o rt.
3 . A C 1 00 ~ 2 40 V Po wer inp ut .
• In stallatio n Req u irem en t
• Pan el d escrip t io n
This HDMI powerline extender applies the H D Bit T t ran smissio n protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric met er, it just needs to connect
transmitt er and receiv er .Pow er them on and they can match automatically .
Plug and play design giv es user s ver y convenient and por table connection.
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
HDMI output
IR blaster extension
cable inter face
Connect with IR blaster extension cable. Please put the IR blaster
close to source d evice t o b est transmit t he IR signal from receiver
2. HDMI Extender RX receiver
Specification
HDMI signal Full comp atible with HDCP
Suppor t resolution 4 8 0 i @ 6 0 H z , 4 8 0 p @ 6 0 H z , 5 7 6 i @ 5 0 H z, 5 7 6 p @ 5 0 H z ,
7 2 0 p @ 5 0 / 6 0 H z , 1 0 8 0 i @ 5 0 / 6 0 H z , 1 0 8 0 p @ 5 0 / 6 0 H z
Transmit distance
It e xt en d s 1 0 80 P@ 6 0 Hz sig n al u p to 3 0 0 m ete rs in g o o d
ele ct ric p o w er e nv iro n me nt .
W orking temperatur e 0 60
Input voltage AC 100240V
Power consumption TX: 7.5W; RX: 7W
Product dimension
W eight
Color
Items
Black
Enclosure material fireproo f engineering plastics
Transpor t pr otocol HDbitT
• Co n nectio n
• FA Q
Q: TV display “waiting for connection… ” on the bott om right corner?
A: Please check if the pow er supply of TX (sender) is well connect ed and the
pow er indicat or led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX .
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
• Sp ecif icatio n
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
IR r eceiv er ext ension
cable int erface
Connect with IR r eceiver extension cable. Please mak e sure the
remote contr ol is within the r equir ed range o f IR receiver .
HDMI output Connect with HDMI display device
1. HDMI Extender TX sender
Q: Display not fluent and stable?
A: 1) Please check if the pow erline is arranged smooth and If the pow eline
length is ov er the limitation of this product.
2) Please check if the pow erline capacity is ov er loaded
3) Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using pow er charger and
pow er adapt er.
IR remote contr ol Sup p o rt 2 0 ~ 6 0kHz I R rem o t e d e v ice
150 (W ) x 9 2.7(D ) x 2 5(H ) m m *2 p cs
TX : 3 3 0g R X : 31 6g
TV
D V D
TV
Se n d er
Receiver
IR O U T
IR IN
Powerline
HDMI cable
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input Connect with HDMI sour ce device
Connect with HDMI display device
N o t e: Th e t ra n sm i ssi o n d i sta nce m ay v a ry in d i f f e re n t
ele ct ric p o w e r env iro n me nt.
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA:
http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be
thrown in the trash or dumped. Substances in the product may be hazardous to human health
or the environment. Disposal may be done by returning the product to your dealer or leaving it
a collection point provided for this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD
2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has been assessed in
accordance with applicable standards in effect.
NETWORKING
EQUIPMENT
www.gigamedia.net
USER
MANUAL
GGM HDCPLKIT
HDbitT HDMI Extender over Powerline
Please read b elo w safe ty in stru ctio n s carefu lly b ef o re in stallat io n and
o p erat io n :
1. Please p ay attentio n to all the warning s and hints o n this d ev ice.
2 . D o no t exp o se t his un it to rain , m o isture and liq uid .
3. Do no t p ut any stuff into the d evice.
4 . D o no t rep air th e d ev ice o r o p en t he en clo su re w it ho u t p ro fe ssio n al
p e rso n g u id an ce to av o id e lect ro nic sh o ck.
5 . M ake sure g o o d v en tilatio n o p en in g s to av o id p ro d uct o v erh eatin g
d amag e.
6. Shut o ff p o wer and make sure env iro nm ent is saf e b ef o re installat io n .
7 . D o no t p lu g -in/ o ut t he ne tw o rk cab les and IR cab les w hen it is in
using to av o id cab les damag e.
8. M ake sure the sp ecificatio n matched if using 3 p arty DC ad ap ters.
• Im p o rt an t safet y n o tice
rd
• In tro d uct io n
• Packag e co ntents
Th an k y o u f o r p urch asin g t his p ro d uct . Fo r o p timum p erfo rm ance and
safety, please read the instructio ns carefully and keep the manual fo r
future reference.
• Featu res
1. It use p o werline to transmit sig nal, and can b e co nnected where there
is o ut let, elim in at in g the w irin g o f net wo rk cab le o r HD M I Cab le.
2 . In p ut v o ltag e: A C 10 0~ 2 4 0V .
3 . It can ext end s 1 08 0P@ 6 0H z sig nal up to 3 00 M u nd er th e co n d itio n
of f luent ele ctric p o w er env iro n ment .
4. It sup p o rts IR p ass back .
5 . Sup p o rts H D M I lo o p o ut p ut fro m TX
6. Firep ro o f raw material is used to ensure safety and reliab ility.
7. Easy setup , p lug and p lay .
H D M I Ex t e n d er TX
se n d e r*1 p c
H D M I Ex t e n d e r RX
re ce iv e r*1 p c
A C 1 0 0 - 2 4 0 V
p o w er li ne *2 p cs
I R b laster exten sio n
cab le *1 p c
I R re ceiv er extensio n
cab le *1 p c
U se r m a n u al*1 p c
1. HD M I so urce d ev ice (DV D, PS3, Set to p b o x, PC etc).
2 . H DM I d isp lay d ev ice like SDT V, H DTV, an d p ro jecto r with HD M I p o rt.
3 . A C 1 00 ~ 2 40 V Po wer inp ut .
• In stallatio n Req u irem en t
• Pan el d escrip t io n
This HDMI powerline extender applies the H D Bit T t ran smissio n protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric met er, it just needs to connect
transmitt er and receiv er .Pow er them on and they can match automatically .
Plug and play design giv es user s ver y convenient and por table connection.
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
HDMI output
IR blaster extension
cable inter face
Connect with IR blaster extension cable. Please put the IR blaster
close to source d evice t o b est transmit t he IR signal from receiver
2. HDMI Extender RX receiver
Specification
HDMI signal Full comp atible with HDCP
Suppor t resolution 4 8 0 i @ 6 0 H z , 4 8 0 p @ 6 0 H z , 5 7 6 i @ 5 0 H z, 5 7 6 p @ 5 0 H z ,
7 2 0 p @ 5 0 / 6 0 H z , 1 0 8 0 i @ 5 0 / 6 0 H z , 1 0 8 0 p @ 5 0 / 6 0 H z
Transmit distance
It e xt en d s 1 0 80 P@ 6 0 Hz sig n al u p to 3 0 0 m ete rs in g o o d
ele ct ric p o w er e nv iro n me nt .
W orking temperatur e 0 60
Input voltage AC 100240V
Power consumption TX: 7.5W; RX: 7W
Product dimension
W eight
Color
Items
Black
Enclosure material fireproo f engineering plastics
Transpor t pr otocol HDbitT
• Co n nectio n
• FA Q
Q: TV display “waiting for connection… ” on the bott om right corner?
A: Please check if the pow er supply of TX (sender) is well connect ed and the
pow er indicat or led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX .
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
• Sp ecif icatio n
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
IR r eceiv er ext ension
cable int erface
Connect with IR r eceiver extension cable. Please mak e sure the
remote contr ol is within the r equir ed range o f IR receiver .
HDMI output Connect with HDMI display device
1. HDMI Extender TX sender
Q: Display not fluent and stable?
A: 1) Please check if the pow erline is arranged smooth and If the pow eline
length is ov er the limitation of this product.
2) Please check if the pow erline capacity is ov er loaded
3) Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using pow er charger and
pow er adapt er.
IR remote contr ol Sup p o rt 2 0 ~ 6 0kHz I R rem o t e d e v ice
150 (W ) x 9 2.7(D ) x 2 5(H ) m m *2 p cs
TX : 3 3 0g R X : 31 6g
TV
D V D
TV
Se n d er
Receiver
IR O U T
IR IN
Powerline
HDMI cable
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input Connect with HDMI sour ce device
Connect with HDMI display device
N o t e: Th e t ra n sm i ssi o n d i sta nce m ay v a ry in d i f f e re n t
ele ct ric p o w e r env iro n me nt.
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA:
http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be
thrown in the trash or dumped. Substances in the product may be hazardous to human health
or the environment. Disposal may be done by returning the product to your dealer or leaving it
a collection point provided for this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD
2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has been assessed in
accordance with applicable standards in effect.
NETWORKING
EQUIPMENT
www.gigamedia.net
USER
MANUAL
GGM HDCPLKIT
HDbitT HDMI Extender over Powerline
Please read b elo w safe ty instru ctio n s caref ully b ef o re installat io n an d
o p erat io n :
1. Please pay attentio n to all the warning s and hints o n this d evice.
2 . D o no t exp o se t his un it t o rain , m o isture and liq uid .
3. Do no t p ut any stuff into the d ev ice.
4 . D o no t rep air the d ev ice o r o p en t he en clo su re w it ho u t p ro fessio n al
p erso n g u id an ce to av o id ele ctro n ic sh o ck .
5 . M ake sure g o o d v en tilat io n o p enin gs to av o id p ro d uct o v erh eating
damag e.
6. Shut o ff p o w er and make sure env iro nm ent is safe b e fo re in stallatio n.
7 . D o no t p lug -in/ o ut t he n et wo rk cab les and IR cab les w hen it is in
using to av o id cab les damag e.
8. M ake sure the specificatio n matched if using 3 party DC ad ap ters.
• Im p o rt an t safety n o tice
rd
• Int ro d uct io n
• Packag e co n ten ts
Th an k y o u fo r p urch asin g this p ro duct. Fo r o p tim um p erfo rman ce an d
safety, please read the instructio ns carefully and keep the manual fo r
future reference.
• Feat u res
1. It use p o werline to transmit sig nal, and can b e co nnected where there
is o utlet, elim in at in g t he w irin g o f netw o rk cab le o r H DM I Cab le.
2 . In p ut v o ltag e: A C 1 00 ~ 2 40 V .
3 . It can e xtend s 1 0 80 P@ 6 0H z sig nal up to 3 00 M u nd er the co nd it io n
o f flu en t ele ctric p o w er env iro nm ent.
4. It sup p o rts IR pass b ack .
5 . Sup p o rts HD M I lo o p o utp ut f ro m TX
6. Firep ro of raw material is used to ensure safety and reliab ility.
7. Easy setup , plug and p lay .
H D M I Ex t e n d e r T X
se n d e r*1 p c
H D M I Ex t e n d e r RX
re ce iv e r*1 p c
A C 1 0 0 - 2 4 0 V
p o w er lin e*2 p cs
I R b laste r e xt e n sio n
cab le *1 p c
I R re ce iv er e xte n sio n
cab le *1 p c
U se r m a n u al*1 p c
1. HD M I so urce d evice (D V D, PS3 , Set to p bo x, PC etc).
2 . H DM I d isp lay d ev ice like SDT V, H DTV, an d p ro jecto r w it h H D M I p o rt.
3 . A C 1 00 ~ 24 0 V Po we r in put.
• Inst allat io n Req u irem en t
• Pan el d escrip t io n
This HDMI powerline extender applies the H D Bit T t ran smissio n protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric meter, it just needs to connect
transmitt er and receiv er .Pow er them on and they can match automatically .
Plug and play design giv es users ver y convenient and por table connection.
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
HDMI output
IR blaster extension
cable inter face
Connect with IR blaster extension cable. Please put the IR blaster
close to source d evice to b est transmit the IR signal from receiver
2. HDMI Extender RX receiver
Specification
HDMI signal Full comp atible with HDCP
Suppor t resolution 4 8 0 i@ 6 0 H z , 4 8 0 p @ 6 0 H z , 5 7 6 i @ 5 0 H z, 5 7 6 p @ 5 0 H z ,
7 2 0 p @ 5 0 / 6 0 H z , 1 0 8 0 i @ 5 0 / 6 0 H z , 1 0 8 0 p @ 5 0 / 6 0 H z
Transmit distance
It e xt en d s 1 0 8 0P@ 6 0 H z sig n al u p t o 3 00 m ete rs in g o o d
ele ct ric p o w er env iro nm ent .
W orking temperatur e 0 60
Input voltage AC 100240V
Power consumption TX: 7.5W; RX: 7W
Product dimension
W eight
Color
Items
Black
Enclosure material fireproo f engineering plastics
Transpor t pr otocol HDbitT
• Co n nect io n
• FA Q
Q: TV display “waiting for connection… ” on the bott om right corner?
A: Please check if the pow er supply of TX (sender) is well connect ed and the
pow er indicat or led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX .
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
• Sp ecificat io n
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
R eset Press reset button to r estart the device
Power input Connect with A C100~240V power line
IR r eceiv er ext ension
cable int erface
Connect with IR r eceiver extension cable. Please mak e sure the
remote contr ol is within the r equir ed range o f IR r eceiver .
HDMI output Connect with HDMI display device
1. HDMI Extender TX sender
Q: Display not fluent and stable?
A: 1) Please check if the pow erline is arranged smooth and If the pow eline
length is ov er the limitation of this product.
2) Please check if the pow erline capacity is ov er loaded
3) Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using pow er charger and
pow er adapt er.
IR remote contr ol Su p p o rt 2 0~ 6 0 kH z I R remo te d ev ice
150(W ) x 9 2.7(D ) x 2 5 (H) m m *2 p cs
TX : 33 0g R X : 3 16 g
TV
D V D
TV
Se n d er
Receiver
IR O U T
IR IN
Powerline
HDMI cable
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input Connect with HDMI sour ce device
Connect with HDMI display device
N o t e: T he t ra n sm i ss io n d i sta nce m ay v ar y in d i f f ere n t
ele ct ric p o w e r en v iro nm ent .
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA:
http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be
thrown in the trash or dumped. Substances in the product may be hazardous to human health
or the environment. Disposal may be done by returning the product to your dealer or leaving it
a collection point provided for this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD
2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has been assessed in
accordance with applicable standards in effect.
NETWORKING
EQUIPMENT
www.gigamedia.net
USER
MANUAL
GGM HDCPLKIT
HDbitT HDMI Extender over Powerline
Please read b elo w saf ety instru ctio ns care fu lly b ef o re inst allatio n an d
o p erat io n :
1. Please p ay attentio n to all the w arning s and hints o n this d evice.
2 . D o n o t e xp o se this unit to rain , m o isture an d liq u id .
3. Do no t p ut any stuff into the dev ice.
4 . D o n o t rep air th e d ev ice o r o p e n the e nclo sure w it ho u t p ro fe ssio n al
p erso n g u id an ce to av o id ele ctro n ic sh o ck .
5 . M ake su re g o o d v ent ilatio n o p en in g s to av o id p ro duct o v erh eating
d amag e.
6. Shut o ff p o wer and make sure env iro n men t is safe b ef o re inst allatio n.
7 . D o n o t p lu g -in/ o ut th e n etw o rk cab les an d IR cab les w hen it is in
using to avo id cab les damag e.
8. M ake sure the sp ecificatio n matched if using 3 party DC ad ap ters.
• Im p o rtan t saf et y n o tice
rd
• In tro d u ct io n
• Packag e co n ten ts
Th an k y o u fo r p u rchasin g th is p ro d uct. Fo r o p timum p erfo rm ance an d
safety, please read the instructio ns carefully and keep the manual fo r
future reference.
• Featu res
1. It use p o werline to transmit sig nal, and can be co nnected where there
is o ut let , e lim in at in g th e w iring of ne tw o rk cab le o r HD M I Cab le.
2 . In put v o lt ag e: AC 1 00 ~ 2 40 V .
3 . It can exten d s 1 08 0P@ 6 0H z sig n al up to 30 0M und e r th e co nd itio n
o f f luen t e lect ric p o w er env iro n ment .
4. It sup po rts IR p ass back .
5 . Su p p o rts HD M I lo o p o utp ut f ro m TX
6. Firep ro of raw material is used to ensure safety and reliab ility.
7. Easy setup , plug and p lay .
H D M I Ex tend er TX
se n d e r*1 p c
H D M I Ex tend er RX
re ce iv e r*1 p c
A C 1 0 0 -2 4 0 V
p o w er li ne *2 p cs
I R b la st e r e x t en sio n
cab le *1 p c
I R re ce iv e r e x tensio n
cab le *1 p c
U se r m a n u al*1 p c
1. HDM I so urce d ev ice (D V D, PS3, Set to p b ox, PC etc).
2 . H DM I d isp lay d ev ice like SDTV, H DT V, an d p ro jecto r w ith H DM I p o rt.
3 . A C 1 00 ~ 24 0V Po w er in p ut.
• In st allat io n Req u irem en t
• Pan el d escrip tio n
This HDMI powerline extender applies the H D BitT tran smissio n protocol
and transmits audio and video signal over existing power line. It does not
require any cabling. Under the same electric meter, it just needs to connect
transmitt er and receiv er .Pow er them on and they can match automatically .
Plug and play design giv es users ver y convenient and por table connection.
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
Reset Press reset button to r estart the device
Power input Connect with A C100~240V power line
HDMI output
IR blaster extension
cable inter face
Connect with IR blaster extension cable. Please put the IR blaster
close to s ource d evice to b est transmit t he IR signal from receiver
2. HDMI Extender RX receiver
Specification
HDMI signal Full comp atible with HDCP
Suppor t resolution 4 8 0 i @ 6 0 H z , 4 8 0 p @ 6 0 H z , 5 7 6 i @ 5 0 H z , 5 7 6 p @ 5 0 H z ,
7 2 0 p @ 5 0 / 6 0 H z , 1 0 8 0 i @ 5 0 / 6 0 H z , 1 0 8 0 p @ 5 0 / 6 0 H z
Transmit distance
It e xte nd s 1 0 8 0P@ 60 H z sig n al u p t o 3 00 me te rs in g o o d
ele ct ric p o w er en viro n ment.
W orking temperatur e 0 60
Input voltage A C 100240V
Power consumption TX: 7.5W; RX: 7W
Product dimension
W eight
Color
Items
Black
Enclosure material firepr oo f engineering plastics
Transpor t pr otocol HDbitT
• Co nn ect io n
• FA Q
Q: TV display “waiting for connection… ” on the bott om right corner?
A: Please check if the pow er supply of TX (sender) is well connect ed and the
pow er indicat or led lights on.
Q: TV display “Please check the TX input signal”?
A: 1) please check if there is an HDMI signal input of sender TX .
2) Try to connect the signal source directly to display device to see if there
is signal output from source device or change the signal source, HDMI
cables and try again.
• Sp ecificat io n
Data transmission
led
Led blinks slowly when it is connecting. Led blinks fast when it
is successfully connected and transmitting data
Connection led Led blinks to indicate a working cir cuit connection
Reset Press reset button to r estart the device
Power input Connect with A C100~240V power line
IR r eceiv er extension
cable int erface
Connect with IR r eceiver extension cable. Please mak e sure the
remote contr ol is within the r equir ed range o f IR receiver .
HDMI output Connect with HDMI display device
1. HDMI Extender TX sender
Q: Display not fluent and stable?
A: 1) Please check if the pow erline is arranged smooth and If the pow eline
length is ov er the limitation of this product.
2) Please check if the pow erline capacity is ov er loaded
3) Please check if there is electricity interruption equipment. And it is
advised to plug in wall outlet and avoid using pow er charger and
pow er adapt er.
IR remote contr ol Su p p o rt 2 0 ~ 6 0 kH z I R rem o te d e v ice
15 0 (W ) x 9 2.7 (D) x 2 5 (H) m m *2p cs
TX : 3 30 g R X : 3 16 g
TV
D V D
TV
Se n d er
Receiver
IR O U T
IR IN
Powerline
HDMI cable
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
WAR N IN G
LAYPEOPLE IS FORBIDDEN TO OPEN IT
HDMI input Connect with HDMI sour ce device
Connect with HDMI display device
N o t e: Th e t ra n sm i ssi o n d i sta nce m ay v ar y i n d i f f e re n t
elect ric p o w er en v iro n men t.
TECHNICAL SUPPORT (OUTSIDE FRANCE)
• Technical self-service portal GIGAMEDIA:
http://support.gigamedia.net
Directive WEEE
This product is covered by the WEEE II Directive (Directive 2012/19 / EU). It should not be
thrown in the trash or dumped. Substances in the product may be hazardous to human health
or the environment. Disposal may be done by returning the product to your dealer or leaving it
a collection point provided for this purpose.
This product bears the CE mark which certifies its conformity with the directives LVD
2014/35/EU ; EMC 2014/30/EU and RoHS 2011/65/EU. Compliance has been assessed in
accordance with applicable standards in effect.
NETWORKING
EQUIPMENT
www.gigamedia.net
USER
MANUAL
GGM HDCPLKIT
HDbitT HDMI Extender over Powerline
Table of contents
