Gigaset Gigaset M34 Mounting instructions

EN Dear Customer,
Gigaset Communications GmbH is the legal successor to
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), which in turn continued the Gigaset business
of Siemens AG. Any statements made by Siemens AG or
SHC that are found in the user guides should therefore be
understood as statements of Gigaset Communications
GmbH.
We hope you enjoy your Gigaset.
DE Sehr geehrte Kundin, sehr geehrter Kunde,
die Gigaset Communications GmbH ist Rechtsnachfolgerin
der Siemens Home and Office Communication Devices
GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschäft
der Siemens AG fortführte. Etwaige Erklärungen der
Siemens AG oder der SHC in den Bedienungsanleitungen
sind daher als Erklärungen der Gigaset Communications
GmbH zu verstehen.
Wir wünschen Ihnen viel Freude mit Ihrem Gigaset.
FR Chère Cliente, Cher Client,
la société Gigaset Communications GmbH succède en droit
à Siemens Home and Office Communication Devices GmbH
& Co. KG (SHC) qui poursuivait elle-même les activités Giga-
set de Siemens AG. Donc les éventuelles explications de Sie-
mens AG ou de SHC figurant dans les modes d’emploi
doivent être comprises comme des explications de Gigaset
Communications GmbH.
Nous vous souhaitons beaucoup d’agrément avec votre
Gigaset.
IT Gentile cliente,
la Gigaset Communications GmbH è successore della Sie-
mens Home and Office Communication Devices GmbH &
Co. KG (SHC) che a sua volta ha proseguito l’attività della
Siemens AG. Eventuali dichiarazioni della Siemens AG o
della SHC nei manuali d’istruzione, vanno pertanto intese
come dichiarazioni della Gigaset Communications GmbH.
Le auguriamo tanta soddisfazione con il vostro Gigaset.
NL Geachte klant,
Gigaset Communications GmbH is de rechtsopvolger van
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), de onderneming die de Gigaset-activiteiten
van Siemens AG heeft overgenomen. Eventuele uitspraken
of mededelingen van Siemens AG of SHC in de gebruiksaan-
wijzingen dienen daarom als mededelingen van Gigaset
Communications GmbH te worden gezien.
Wij wensen u veel plezier met uw Gigaset.
ES Estimado cliente,
la Gigaset Communications GmbH es derechohabiente de la
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC) que por su parte continuó el negocio Gigaset
de la Siemens AG. Las posibles declaraciones de la
Siemens AG o de la SHC en las instrucciones de uso se
deben entender por lo tanto como declaraciones de la Giga-
set Communications GmbH.
Le deseamos que disfrute con su Gigaset.
PT SCaros clientes,
Gigaset Communications GmbH é a sucessora legal da Sie-
mens Home and Office Communication Devices GmbH &
Co. KG (SHC), que, por sua vez, deu continuidade ao sector
de negócios Gigaset, da Siemens AG. Quaisquer declara-
ções por parte da Siemens AG ou da SHC encontradas nos
manuais de utilização deverão, portanto, ser consideradas
como declarações da Gigaset Communications GmbH.
Desejamos que tenham bons momentos com o seu Gigaset.
DA Kære Kunde,
Gigaset Communications GmbH er retlig efterfølger til Sie-
mens Home and Office Communication Devices GmbH &
Co. KG (SHC), som fra deres side videreførte Siemens AGs
Gigaset-forretninger. Siemens AGs eller SHCs eventuelle
forklaringer i betjeningsvejledningerne skal derfor forstås
som Gigaset Communications GmbHs forklaringer.
Vi håber, du får meget glæde af din Gigaset.
FI Arvoisa asiakkaamme,
Gigaset Communications GmbH on Siemens Home and
Office Communication Devices GmbH & Co. KG (SHC)-yri-
tyksen oikeudenomistaja, joka jatkoi puolestaan Siemens
AG:n Gigaset-liiketoimintaa. Käyttöoppaissa mahdollisesti
esiintyvät Siemens AG:n tai SHC:n selosteet on tämän
vuoksi ymmärrettävä Gigaset Communications GmbH:n
selosteina.
Toivotamme Teille paljon iloa Gigaset-laitteestanne.
SV Kära kund,
Gigaset Communications GmbH övertar rättigheterna från
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), som bedrev Gigaset-verksamheten efter Sie-
mens AG. Alla förklaringar från Siemens AG eller SHC i
användarhandboken gäller därför som förklaringar från
Gigaset Communications GmbH.
Vi önskar dig mycket nöje med din Gigaset.
NO Kjære kunde,
Gigaset Communications GmbH er rettslig etterfølger etter
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), som i sin tur videreførte Gigaset-geskjeften i
Siemens AG. Eventuelle meddelelser fra Siemens AG eller
SHC i bruksanvisningene er derfor å forstå som meddelelser
fra Gigaset Communications GmbH.
Vi håper du får stor glede av din Gigaset-enhet.
EL Αγαπητή πελάτισσα, αγαπητέ πελάτη,
ηGigaset Communications GmbH είναι ηνομική διάδοχος της
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), ηοποία έχει αναλάβει την εμπορική
δραστηριότητα Gigaset της Siemens AG. Οι δηλώσεις της
Siemens AG ήτης SHC στις οδηγίες χρήσης αποτελούν
επομένως δηλώσεις της Gigaset Communications GmbH.
Σας ευχόμαστε καλή διασκέδαση με τη συσκευή σας Gigaset.
HR Poštovani korisnici,
Gigaset Communications GmbH pravni je sljednik tvrtke
Siemens Home and Office Communication Devices GmbH &
Co. KG (SHC), koji je nastavio Gigaset poslovanje tvrtke
Siemens AG. Zato sve izjave tvrtke Siemens AG ili SHC koje
se nalaze u uputama za upotrebu treba tumačiti kao izjave
tvrtke Gigaset Communications GmbH.
Nadamo se da sa zadovoljstvom koristite svoj Gigaset
uređaj.
SL Spoštovani kupec!
Podjetje Gigaset Communications GmbH je pravni naslednik
podjetja Siemens Home and Office Communication Devices
GmbH & Co. KG (SHC), ki nadaljuje dejavnost znamke
Gigaset podjetja Siemens AG. Vse izjave podjetja Siemens
AG ali SHC v priročnikih za uporabnike torej veljajo kot izjave
podjetja Gigaset Communications GmbH.
Želimo vam veliko užitkov ob uporabi naprave Gigaset.
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark
licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications
reserved.
www.gigaset.com

CS Vážení zákazníci,
společnost Gigaset Communications GmbH je právním
nástupcem společnosti Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), která dále
přejala segment produktůGigaset společnosti Siemens AG.
Jakékoli prohlášení společnosti Siemens AG nebo SHC, které
naleznete v uživatelských příručkách, je třeba považovat za
prohlášení společnosti Gigaset Communications GmbH.
Doufáme, že jste s produkty Gigaset spokojeni.
SK Vážený zákazník,
SpoločnosťGigaset Communications GmbH je právnym
nástupcom spoločnosti Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), ktorá zasa
pokračovala v činnosti divízie Gigaset spoločnosti Siemens
AG. Z tohto dôvodu je potrebné všetky vyhlásenia
spoločnosti Siemens AG alebo SHC, ktoré sa nachádzajú v
používateľských príručkách, chápaťako vyhlásenia
spoločnosti Gigaset Communications GmbH.
Veríme, že budete so zariadením Gigaset spokojní.
RO Stimate client,
Gigaset Communications GmbH este succesorul legal al
companiei Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), care, la rândul său, a
continuat activitatea companiei Gigaset a Siemens AG.
Orice afirmaţii efectuate de Siemens AG sau SHC şi incluse
în ghidurile de utilizare vor fi, prin urmare, considerate a
aparţine Gigaset Communications GmbH.
Sperăm ca produsele Gigaset săfie la înălţimea dorinţelor
dvs.
SR Poštovani potrošaču,
Gigaset Communications GmbH je pravni naslednik
kompanije Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), kroz koju je nastavljeno
poslovanje kompanije Gigaset kao dela Siemens AG. Stoga
sve izjave od strane Siemens AG ili SHC koje se mogu naći u
korisničkim uputstvima treba tumačiti kao izjave kompanije
Gigaset Communications GmbH.
Nadamo se da ćete uživati u korišćenju svog Gigaset
uređaja.
BG Уважаеми потребители,
Gigaset Communications GmbH еправоприемникът на
Siemens Home and Office Communication Devices GmbH
& Co. KG (SHC), която на свой ред продължи бизнеса на
подразделението Siemens AG. По тази причина
всякакви изложения, направени от Siemens AG или
SHC, които се намират връководствата за
потребителя, следва да се разбират като изложения на
Gigaset Communications GmbH.
Надяваме се да ползвате судоволствие вашия Gigaset.
HU Tisztelt Vásárló!
A Siemens Home and Communication Devices GmbH & Co.
KG (SHC) törvényes jogutódja a Gigaset Communications
GmbH, amely a Siemens AG Gigaset üzletágának utódja.
Ebből következően a Siemens AG vagy az SHC felhasználói
kézikönyveiben található bármely kijelentést a Gigaset
Communications GmbH kijelentésének kell tekinteni.
Reméljük, megelégedéssel használja Gigaset készülékét.
PL Szanowny Kliencie,
Firma Gigaset Communications GmbH jest spadkobiercą
prawnym firmy Siemens Home and Office Communication
Devices GmbH & Co. KG (SHC), która z kolei przejęła
segment produktów Gigaset odfirmy Siemens AG. Wszelkie
oświadczenia firm Siemens AG i SHC, które można znaleźć
w instrukcjach obsługi, należy traktowaćjako oświadczenia
firmy Gigaset Communications GmbH.
Życzymy wiele przyjemności z korzystania z produktów
Gigaset.
TR Sayın Müşterimiz,
Gigaset Communications GmbH, Siemens AG'nin Gigaset
işletmesini yürüten Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC)'nin yasal
halefidir. Kullanma kılavuzlarında bulunan ve Siemens AG
veya SHC tarafından yapılan bildiriler Gigaset
Communications GmbH tarafından yapılmışbildiriler olarak
algılanmalıdır.
Gigaset'ten memnun kalmanızıümit ediyoruz.
RU Уважаемыи покупатель!
Компания Gigaset Communications GmbH является
правопреемником компании Siemens Home and Office
Communication Devices GmbH & Co. KG (SHC), которая,
всвою очередь, приняла подразделение Gigaset всвое
управление от компании Siemens AG. Поэтому любые
заявления, сделанные от имени компании Siemens AG
или SHC ивстречающиеся вруководствах
пользователя, должны восприниматься как заявления
компании Gigaset Communications GmbH.
Мы надеемся, что продукты Gigaset удовлетворяют
вашим требованиям.
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark
licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications
reserved.
www.gigaset.com

s
Gigaset M34 USB
PC Adapter & Software
Installation
Issued by
Siemens Home and Office Communication Devices GmbH & Co. KG
Schlavenhorst 66
D-46395 Bocholt
© Siemens Home and Office Communication Devices GmbH & Co. KG 2006
All rights reserved. Subject to availability.
Rights of modification reserved.
www.siemens.com/gigaset
cyan magenta yellow black Liebreich Medienproduktion
*A31008-M1716-B103-1-6319*
A31008-M1716-B103-1-6319
A31008-M1716-B103-1-6319.qxd 05.04.2006 15:24 Uhr Seite 1

1
Contents
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / M34_USB_BookletIVZ.fm / 07.04.2006
Schablone 2004_12_27
Contents
For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Notes on the operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the software and device drivers . . . . . . . 5
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Gigaset products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Minimum PC requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Pack contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Preparing the base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the Gigaset M34 software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Start the Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing the device drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Possible problems during installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Checking successful installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Registering a base station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Status displays for the Gigaset M34 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Service (Customer Care) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Guarantee Certificate United Kingdom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Guarantee Certificate Ireland . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2
For your safety
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Sicherheitshinweise.fm / 07.04.2006
Schablone 2004_12_27
For your safety
ìBefore installing the Gigaset M34 USB PC adapter and software, carefully read the
following information:
Notes on the operating instructions
Online Help
uDuring installation, detailed descriptions appear on the screen.
uThere is also an online help for each component of the Gigaset M34 software. Open
the appropriate component and then either click on the Help icon in the toolbar or
press the F1 key.
Operating instructions
You can also print out all the operating instructions, which can be found in *.pdf format
on the CD-ROM supplied. To read the instructions you will need the Adobe Acrobat
Reader program. You can install this directly from the Gigaset M34 software Setup Wiz-
ard.
ìRead the instructions carefully before using for the first time.
Up to date information
The Gigaset M34 CD-ROM also includes the file readme.txt. This contains further
important information that only became available after the manual had been printed.
ìRead the additional information contained in the file readme.txt carefully.
ìAlso note the product information on the Internet at
http://www.siemens.com/gigasetm34usb.

3
For your safety
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Sicherheitshinweise.fm / 07.04.2006
Schablone 2004_12_27
Safety precautions
General safety precautions
uOnly give the Gigaset M34 USB to third parties with the installation instructions and
CD-ROM.
uAll electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
This crossed-out wheeled bin symbol on the product means the product is covered
by the European Directive 2002/96/EC.
The correct disposal and separate collection of your old appliance will help prevent
potential negative consequences for the environment and human health. It is a pre-
condition for reuse and recycling of used electrical and electronic equipment.
For more detailed information about disposal of your old appliance, please contact
your city office, waste disposal service or the shop where you purchased the prod-
uct.
uNot all of the functions described in this manual are available in all countries.
Installation information
uIn the Windows 2000 and Windows XP operating systems, you must be logged in as
a user with administration rights. Contact your system administrator for details if
necessary.
uBefore installing the Gigaset M34 software, read the information in Chapter "System
requirements" on page 6 to avoid loss of data.
uDuring installation, you are prompted to connect the Gigaset M34 USB to a free USB
port on your PC. This starts the Windows operating system's automatic hardware
recognition routine and installs the device drivers.
Safety precautions for the Gigaset M34 USB PC adapter
uThe operation of medical appliances may be affected.
uDo not operate the Gigaset M34 USB in bathrooms or shower areas. The Gigaset
M34 USB PC adapter is not splash proof.
uAvoid the immediate proximity of heat sources such as radiators and do not expose
the Gigaset M34 USB to direct sunlight.
uOnly use the USB extension cable supplied.
uDo not connect or disconnect the Gigaset M34 during a storm. This brings a risk of
electric shock.
uIf the Gigaset M34 USB comes into contact with liquid, do not use it.
– Allow the liquid to drain out of the device, and then pat all parts of the device dry.
– Store the Gigaset M34 USB in a warm, dry place for at least 72 hours. In many
cases, you will then be able to use it again.

4
For your safety
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Sicherheitshinweise.fm / 07.04.2006
Schablone 2004_12_27
Wireless transmission between the base station and portable part is based on the
DECT 6.0 standard. The Gigaset M34 USB PC adapter meets the appropriate European
specifications. Should there nevertheless be any picture and sound interference with
satellite receivers, please consult your retailer to have your satellite receiver equipment
tested for poor shielding.
Trademarks
Windows 2000 and Windows XP as well as Outlook, Windows Media Player and
Windows-Explorer are registered trademarks of the Microsoft Corporation.
Acrobat is a registered trademark of Adobe Systems Incorporated.
Yahoo! is a registered trademark of Yahoo! Inc.

5
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
Installing the software and device drivers
The Setup Wizard for the Gigaset M34 software guides you through the installation of
all the associated software components. The number and kinds of installation steps
depend on the features of your base station and the devices and functions you want to
use with your base station.
Normally, the following steps are necessary to successfully install the Gigaset M34 soft-
ware:
1. Prepare base station for use, see page 8.
2. Insert Gigaset M34 CD and run the Setup Wizard, see page 8.
3. Reboot the PC
4. Connect the Gigaset M34 USB PC adapter to the PC
5. Install the device drivers for the Gigaset M34 USB PC adapter
6. Set up further components as required
After successful installation, you can start the Gigaset M34 software and configure it to
your own requirements.
iWhen the software has been installed successfully please do not
plug in the device until the Setup Wizard prompts you to do so.
!With the Gigaset S450 Y supplied, Yahoo! and Y! Out are assigned to the two display keys on your handset if you register the Gigaset M34 USB
adapter on this base station.

6
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
System requirements
In order to be able to use the full range of functions, the following minimum require-
ments must be met for installation of the Gigaset M34 USB and software:
Gigaset products
Base station and handset
ìThe table below provides information about which functions you can use with your
base station.
*For these base stations, the Gigaset SX205/255 must undergo a firmware update during the
installation.
** One Gigaset M34 USB PC adapter and a maximum of 4 handsets can be registered on these base
stations.
uYou can also use a SL1, SL1 colour, S1, S1 colour, C34, E45, S44, S45, SL55 or
SL74 handset with one of the above base stations.
uThe base station is ready for use.
For details, refer to the operating instructions for your base station.
Base stations Internet access (IP) Internet telephony and
PC control
Maximum number of
handsets
C340/345 –+6
C350/355 –+6
E450/455 –+6
S440/445 –+6
S450/455 –+6
S450 Y –+6
S645 –+6
SL440 –+6
SL550/555 –+6
CX340/345isdn + + 1+4**
CX100/150isdn +–6
SX100/150isdn +–6
SX203/253isdn +–8
SX205/255isdn +–8
SX303/353isdn +–8
SX440/445isdn + + 1+4**
SX450/455isdn + + 1+4**
SLX740isdn +–8
4170/75isdn*+–8
3070/75isdn*+–8

7
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
Gigaset M34 USB PC adapter
uThe Gigaset M34 USB should not be connected to the PC before installation.
Minimum PC requirements
Hardware
uIBM AT-compatible Pentium III with 500 MHz processor speed
u128 MB RAM main memory
u20 MB free hard disk memory
u1 free USB port
u1CD-ROMdriveor 1 DVD drive
Software
uOperating system
Windows 2000 (Service pack 4) or Windows XP.
Have the installation CD for your Windows operating system to hand. During the
installation of the Gigaset M34 software, the Setup Wizard checks the configuration
of your operating system. You may be prompted to install certain additional Win-
dows components.
uUser rights
In the Windows 2000 and Windows XP operating systems, you must be logged in as
a user with administration rights. Contact your system administrator for details if
necessary.
Pack contents
u1 Gigaset S450 Y
u1 Gigaset M34 USB PC adapter
u1 USB extension cable
u1 CD-ROM containing software and comprehensive operating instructions
u1 set of installation instructions
iPlease note that applications that you would like to use with the
M34 USB, such as Voice over IP, do not support all operating systems.

8
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
Preparing the base station
ìRead the operating instructions for your base station.
ìConnect your base station.
– Connect your base station to your phone line or PABX using the telephone cable.
– Connect the base station to the power supply using the mains adapter.
Your base station is now ready for use.
Installing the Gigaset M34 software
ìRead the information in "System requirements" on page 6 and the readme.txt file
before starting to install the Gigaset M34 software. You will find the readme.txt file
in the readme directory on the product CD. It contains current additional informa-
tion on installation and software.
ìClose all the programs running on your PC. This also includes those programs
(e. g. antivirus software), whose activity is only indicated by an icon in the status
area of the taskbar (next to the clock).
Start the Setup Wizard
ìInsert the Gigaset M34 CD into your PC's CD-ROM drive.
The Setup Wizard for the Gigaset M34 software is started automatically.
i
Now that your base station is ready for use, you can make external calls
and also take incoming calls.
It is not necessary to install the Gigaset M34 software to do this.
ìYou can check that your base station is working properly by dialling
an external telephone number.
ìIf you cannot make the call, check your phone line or the settings for
your PABX.
You will find a detailed description in the operating instructions for
your phone line or PABX.
iWhen the software has been installed successfully please do not
plug in the device until the Setup Wizard prompts you to do so.
i
If the Setup Wizard for the Gigaset M34 software does not start automat-
ically:
ìOpen Windows Explorer.
ìSelect the CD-ROM drive.
ìDouble-click start.exe.

9
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
The Setup Wizard guides you through the installation.
ìSelect the language in which you want to install the Gigaset M34 software.
ìClick on Continue.
The main menu for the installation software is opened.
ìClick on one of the following options if you want to read additional information
about installing the software.
Or
ìClick on Install software to start the installation of the Gigaset M34 software.
You will find a detailed description of the installation steps in the next chapter.
Installing the software
Installation involves various steps in which you can select a number of options. After
each step confirm your selection with Continue to continue with the installation proce-
dure. Use Back to return to your previous selection.
You will find detailed information about installing, configuring and operating "Yahoo!
Messenger with Voice“ in the operating instructions for these software packages. You
will find these operating instructions in PDF format in the gigaset-m34-software\man-
uals directory on the CD you received when you bought the M34 USB adapter.
When you select the Install software option, the InstallShield Wizard for the
Gigaset M34 software starts up. This installation wizard guides you through the indivi-
dual installation steps.
Readme files Up to date additional information about installation
and the software.
Operating instructions The operating instructions for the Gigaset M34 USB
and software. The operating instructions are in
PDF format and can be viewed on your PC or printed
out. To do this, you will need the free Acrobat Reader
software. This can be found in the Service & Support
area of the CD-ROM supplied. As well as the operat-
ing instructions in PDF format, the software also pro-
vides an online help, which you can call up directly
from within the program.
Service & Support This area contains Internet links to the web pages
for Siemens Home and Office Communication
Devices GmbH & Co. KG. You can also install the
Acrobat Reader program to view the operating
instructions.
Uninstall all components This is used to remove the entire Gigaset M34 soft-
ware, including all components, from your PC.

10
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
ìClick on Continue to start the installation.
The directory in which the software is to be installed is shown.
ìSelect the appropriate mode for installing device drivers. We recommend that you
do not change the Simple (Recommended) settings.
ìClick on Continue
ìSelect the folder where the selected software components are to be installed:
– Click Continue to confirm the default installation directory.
Or
– Click Browse to choose your own installation directory.
ìClick on Install.
ìAfter installation of the software components, click on Finish to confirm completion
of the installation procedure. You then need to reboot your PC. You can only set up
the Gigaset M34 USB PC adapter after rebooting.
ìClick on Yes to reboot the PC.
iIf a dialog box appears during installation informing you about a missing
signature, click on Yes to continue the installation.

11
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
Installing the device drivers
After restarting, installation is continued automatically. You are prompted to connect
the Gigaset M34 USB PC adapter to the PC and the driver software is then installed.
Later, you should register the Gigaset M34 USB PC adapter on your base station and you
can then use the full range of functions of the software.
ìConnect the Gigaset M34 USB to a free USB port on your PC.
ìWhen you connect the Gigaset M34 USB, hardware recognition is started. This
feature monitors the installation of new device drivers. Depending on the previous
configuration of your PC, it may be necessary to install several drivers for you
Gigaset M34 USB PC adapter. Hardware recognition is started automatically for each
driver installation.
–Followthehardware recognition instructions.
– On Windows XP, confirm the preset options with Continue and then click on
Finish.
If you cancel hardware recognition, the driver software cannot be correctly
installed.
ìWait until the hardware recognition procedure has completed installation of the
device drivers and you see a message to that effect. Once this message is displayed,
click on Continue in the Setup Wizard.
ìClick on Finish in the Setup Wizard.
ìReboot your PC if you are prompted to do so.
ìA message will be displayed, informing you that the standard device settings for
recording and playback have been changed (see also section "Audio settings" on
page 13). Click on OK to complete the installation.

12
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
Possible problems during installation
On rare occasions it can happen that a program called up by the Gigaset M34 software
Setup Wizard does not respond:
ìClose the Setup Wizard and the program that is not responding and try again.
If the USB driver cannot be found even though it has been set properly:
ìDisconnect the Gigaset M34 USB PC adapter from your PC.
ìReboot your PC.
ìReconnect the Gigaset M34 USB to your PC.
ìRestart the Setup Wizard.
Checking successful installation
After rebooting the PC, the following things indicate that the Gigaset M34 USB and soft-
ware have been successfully installed:
uThe Start menu contains three new links:
–Start >Programs >Gigaset DECT >Gigaset M34 Software
–Start >Programs >Gigaset DECT >Gigaset M34 USB – Firmware update
uThe following items have been added to the Device Manager in your Windows
operating system (Start >Settings >Control Panel >System >Hardware >
Device Manager):
–UnderDECT Devices:DECT Data Device
–UnderNetwork Adapters
–UnderAudio, Video and Game Controllers: USB audio device
–IntheUSB-Controller section: Cordless Device Configuration, Cordless Device
Line Access, Cordless Device Update, Cordless PC Control
i
uIf you want to use your Gigaset M34 USB PC adapter for Internet
telephony (VoIP), you must install "Yahoo! Messenger with Voice“ on
your PC. The software is available on the Internet at
http://uk.messenger.yahoo.com/
Reboot your PC after installation.
!
In some older PC systems, chipsets are fitted, which no longer corre-
spond to the valid USB standard. This can lead to problems with the
USB connection.
Manufacturers of these hardware components normally supply a driver
update. Please contact the manufacturer of your PC.

13
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
uThe Software area in the Control Panel of the Windows operating system shows
the names of the installed software components:
–Gigaset M34 Software
–Gigaset M34 USB
Audio settings
Owing to Microsoft Software Regulations the audio device driver USB audio device
has been installed on your PC as your default device for recording and playback. This is
also necessary because it allows you to listen to music through your handset with
Windows Media Player and make phone calls via the Internet.
For example, if you wish to record or playback sound on your PC (e.g. through your PC's
loudspeaker/microphone or connected headphones) while playing a computer game,
you must change the settings of the device driver.
ìClick on Start > Settings > Control Panel > Sounds and Audio Devices
(Windows 2000) or Sounds and Multimedia (Windows XP), Audio tab.
ìFor sound playback and recording, select the default sound card driver of your PC as
the default device instead of the USB audio device entry.
ìClick on OK to apply the setting.
Using PC loudspeaker/headset with your handset
In most Windows applications you can also create specific settings for the audio device
driver irrespective of the settings in the Control Panel. This allows you to specify where
sound is recorded and played back (PC or handset) for specific applications.
For example, if you have set your PC's default soundcard driver, you can make a phone
call with your handset over the Internet while listening to music through your PC's loud-
speakers at the same time.
Please note: For Internet telephony with Yahoo! Messenger with Voice, the device
driver USB audio device is automatically set (temporarily) as soon as you make a call
with your handset.
i
uCertain entries are only displayed when a base station is connected.
uDepending on the Windows operating system you are using and the
voice packets installed, differences in the naming of the driver can
arise.

14
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
Registering a base station
You can register your Gigaset M34 USB on up to 6 base stations. To do this, you enter
the base stations available at the relevant location of the PC in the Gigaset M34 soft-
ware. The registered base stations are saved in the software and you can then connect
to one of the registered base stations as required.
ìOpen the Gigaset M34 software via Start > Programs > Gigaset DECT
> Gigaset M34 Software.
ìIn the menu tree, select the M34 USB > Configuration entry.
ìUnder Base stations click on one of the <free base> options.
The Register button is activated.
ìSet the base station to registration mode.
– Press and hold the registration key for a few seconds. Some base stations indicate
registration via a flashing LED or an acoustic signal.
– Refer to the operating instructions for your base station for more details.
ìClick on Register to begin registration.
This opens the Register dialog.
ìEnter the PIN for the base station (factory default "0000") and confirm your entry
with OK.
ìWait until registration has been completed.
The Register dialog is closed.
Once the connection between your base station and the M34 USB has been estab-
lished, you will see the base station data on your PC. The Name field contains the
name under which the Gigaset M34 USB has been registered on the base station.
You will need this name to establish the connection between the handset and the
M34 USB.
i
Requirements:
uThere must be a free space in the list under Base stations.
uThere must be another free registration location for internal
subscribers on the base station.
uThe base station must be in registration mode before commencing
the registration procedure.
uThe base station PIN must be entered during registration.
For further information, refer to the operating instructions for the rele-
vant base station.

15
Installing the software and device drivers
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Installieren.fm / 07.04.2006
Schablone 2004_12_27
Status displays for the Gigaset M34 USB
LED is constantly illuminated: Base station found; Gigaset M34 USB is ready for use.
LED flashes slowly: Gigaset M34 USB is looking for the base station or no base station
has been registered.
LED flashes quickly: Data connection active between Gigaset M34 USB and base
station.
LED flickers: Gigaset M34 USB is in firmware update mode.

16
Appendix
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Anhang.fm / 07.04.2006
Schablone 2004_12_27
Appendix
Service (Customer Care)
We offer you fast support tailored to your specific needs!
uOur Online Support on the Internet can be contacted any time from anywhere:
It will give you 24/7 support for all our products. It also provides interactive trouble-
shooting, a list of FAQs and answers plus operating instructions and current soft-
ware updates for you to download.
uPersonal advice on our range of products is available on our Premium-Hotline:
You can talk to qualified Siemens technicians who will guide you expertly through
product information and installation.
uFor fast and dependable assistance w ith any repairs or guarantee/warranty claims,
contact our Service Centres in:
Please have your proof of purchase ready when calling.
Replacement or repair services are not offered in countries where our product is not sold
by authorised dealers.
Please address any questions about the DSL or cable connection to your network pro-
vider.
Authorisation
This device is intended for use within the European Economic Area and Switzerland.
If used in other countries, it must first be approved nationally in the country in question.
Country-specific requirements have been taken into consideration.
We, Siemens Home and Office Communication Devices GmbH & Co. KG, declare that
this device meets the essential requirements and other relevant regulations laid down
in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address:
http://www.siemens.com/gigasetdocs.
www.siemens.com/gigasetcustomercare
United Kingdom 0 90 69 50 04 30
Ireland 18 50 77 72 77
United Kingdom 0 84 53 67 08 12

17
Appendix
M34 FIFA KBA / englisch / A31008-M1716-B103-1-7619 / Anhang.fm / 07.04.2006
Schablone 2004_12_27
Guarantee Certificate United Kingdom
Without prejudice to any claim the user (customer) may have in relation to the dealer or
retailer, the customer shall be granted a manufacturer's Guarantee under the conditions
set out below:
uIn the case of new devices and their components exhibiting defects resulting from
manufacturing and/or material faults within 24 months of purchase, Siemens shall,
at its own option and free of charge, either replace the device with another device
reflecting the current state of the art, or repair the said device. In respect of parts
subject to wear and tear (including but not limited to, batteries, keypads, casing),
this warranty shall be valid for six months from the date of purchase.
uThis Guarantee shall be invalid if the device defect is attributable to improper treat-
ment and/or failure to comply with information contained in the user manuals.
uThis Guarantee shall not apply to or extend to services performed by the authorised
dealer or the customer themselves (e.g. installation, configuration, software down-
loads). User manuals and any software supplied on a separate data medium shall be
excluded from the Guarantee.
uThe purchase receipt, together with the date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims under the Guarantee must be submitted
within two months of the Guarantee default becoming evident.
uOwnership of devices or components replaced by and returned to Siemens shall vest
in Siemens.
uThis Guarantee shall apply to new devices purchased in the European Union. For
Products sold in the United Kingdom the Guarantee is issued by: Siemens Home and
Office Communication Devices GmbH & Co. KG, Schlavenhorst 66, D-46395
Bocholt, Germany.
uAny other claims resulting out of or in connection with the device shall be excluded
from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a
Customers Statutory Rights, nor the manufacturer's liability for death or personal
injury resulting from its negligence.
uThe duration of the Guarantee shall not be extended by services rendered under the
terms of the Guarantee.
uInsofar as no Guarantee default exists, Siemens reserves the right to charge the cus-
tomer for replacement or repair.
uThe above provisions does not imply a change in the burden of proof to the detri-
ment of the customer.
To invoke this Guarantee, please contact the Siemens telephone service. The relevant
number is to be found in the accompanying user guide.