GILKON 8IMFP7-WM User manual

All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
SPECIFICATION & INSTALLATION GUIDE
8IMFP7-WM
Wall Mount Unit for Flat Panel Display
with Motorized Raise and Lower
www.gilkon.com.au
email: [email protected]
phone: [phone]
fax: [phone]

All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
CONTENTS
1
1. DISCLAIMER Page 2
2. WARNINGS & SAFETY INSTRUCTIONS Page 3
3. PACKAGE CONTENTS Page 4
4. SPECIFICATIONS Page 5-6
5. INSTALLATION: Attach wall and floor brackets Page 7
6. INSTALLATION: Attaching the display Page 8
7. INSTRUCTION: Raising & lowering Page 9

All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
1. DISCLAIMER
Wilson & Gilkes Pty Ltd, intends to make this manual accurate and complete. However, Wilson & Gilkes Pty Ltd makes no claim
that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency
in connection with the installation or use of this product. Information contained in this document is subject to change without notice
or obligation of any kind. Wilson & Gilkes makes no representation of warranty, expressed or implied, regarding the information
contained herein. Wilson & Gilkes assumes no responsibility for accuracy, completeness or sufficiency of the information contained
in this document.
2

All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
2. WARNINGS & SAFETY INSTRUCTIONS
Failure to read, understand and follow all instructions can result in serious personal injury, damage to
equipment or voiding warranty. It is the installer’s responsibility to make sure all components are properly
installed using the instructions provided.
3
WARNING!
!
● Installation & assembly work must be carried out by properly licenced technicians or qualified trades people.
● Incorrect installation can cause the 8IMFP7-WM unit to fall and cause injury. This company assumes no responsibility for injuries or damages that may
occur due to improper installation and handling.
● The unit is designed for use with specific products and weight. Exceeding maximum weight capacity to the moving frame may damage product and equipment
and could lead to serious personal injury.
● Adhering to proper installation instructions is critical in ensuring all components function properly. A small difference in installation can lead to a severely skewed
and distorted projection image. In order to obtain a square image without the use of digital adjustment of the projector, follow the step by step instructions as
shown.
● Installation will require the lifting of heavy components. A minimum of two people are required.
● Fully tighten all mounting screws as specified in the installation instructions. However, attachment points can be damaged if a power drill is used to tighten
screws. Screws should be turned by hand first before tightening with a hex key. Do not over tighten screws. Check fasteners regularly to avoid parts becoming
loose.
● Do not allow children to climb onto the frame
● Make sure cables are not caught between moving parts to ensure cables will not be damaged. Cable tie all loose cables to avoid damage.
● When the 8IMFP7-WM is not in use, switch off the power source.
● Make sure the fully raised height of the 8IMFP7-WM does not exceed the height of the building/room the 8IMFP7-WM will be used in.

All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
3. PACKAGE CONTENTS
Electric Wall Mount
8IMFP7-WM
Frame
(Qty: 1)
ALLEN KEY
(Qty: 1) Fastener kit
(Qty: 2)
4
Lower Wall Bracket
(Qty: 1)
NOTE: Packaged contents may look different to content shown in diagrams
Upper Wall Bracket
(Qty: 1)
NOTE: Wall fixing fasteners/anchors are not supplied by Wilson & Gilkes
OPTIONAL Front Mounted Computer Kit
Mount Bracket
(Qty: 1)
Keyboard & Mouse
Pockets
(Qty: 1)
Camera Bracket
(Qty: 1)
Fastener kit
(Qty: 1

Wall Mount for
Flat Panel Displays
with Motorized
Raise and Lower
Model: 8IMFP7-WM
All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
4. SPECIFICATIONS
5
Screen Mounting Compatibility:
Supports mounting hole pattern from 75mm to 800mm wide and from 75mm to 400mm high.

All specifications are subject to change without notice.Copyright ©2017 Wilson & Gilkes. All rights reserved. 6
Component/ Feature Specifications Description Reference
page
WEIGHT
8IMFP7-WM Approx 42kg 8IMFP7-WM Wall Mount assembled
MAXIMUM
WEIGHT CAPACITY 120kg
MOVEMENT
Total Lift 645mm Page 5
DIMENSIONS
Height (raised) 1805mm Height of 8IMFP7-WM Wall Mount when fully raised Page 5
Height (closed) 1160mm Height of 8IMFP7-WM Wall Mount when fully closed Page 5
Depth 137mm Depth of 8IMFP7-WM Wall Mount Page 5
Width 1050mm Width of fully assembled F8IMFP7-WM Wall Mount
without display screen attached
Page 5
Gilkon®8IMFP7-WM Wall Mount by Wilson & Gilkes

All specifications are subject to change without notice.Copyright ©2017 Wilson & Gilkes. All rights reserved.
5. INSTALLATION: Attach Upper & Lower Brackets
7
WARNING!
!
● 8IMFP7-WM EXCEEDS 15KG. TWO MEN OPERATION REQUIRED.
NOTE: Wall fixing fasteners /anchors are not supplied by Wilson & Gilkes,
1. Attach upper
bracket to frame
in upper holes
using M6 Screws
& washers (fastener
kit) provided.
2. Attach lower
bracket to wall
at desired height.
ensure bracket
is level.
Wall anchors
not supplied.
3. Rest frame in
lower bracket,
attach upper wall
bracket to wall.
Wall anchors
not supplied.

All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
6. INSTALLATION: Attaching the display
(1) To mount the display onto the wall mount, attach hook arms to the mounting points at
the back of the display. The lock of the hook arms should be at the lower side of the display
screen.
NOTE: Make sure the hook arms are aligned horizontally, or the picture will become skewed.
(2) Hook the hook arms on the back of the display onto the crossbars on the frame of the
wall mount (as shown). Adjust the screen horizontally along the crossbar until it is in the
desired position. When the display is in the desired position, push the locks upwards so the
pin of the lock engages a slot on the underside of the crossbar.
CAUTION: Due to the weight of the display screens and the height of the mounting
crossbars, the lifting of the display should be done by a minimum of two people.
(3) To unlock/release the screen, turn the key to release the spring loaded pin in the lock.
(1)
(2)
(3)
8

All specifications are subject to change without notice.
Copyright ©2017 Wilson & Gilkes. All rights reserved.
9. INSTRUCTION: Raising & Lowering
9
(1) To raise or lower the
screen, use the switch
mounted on the side of
the 8IMFP7-WM.
wall mount.
Note: the switch is tethered
to the unit with a cable and can
be utilised in front of the screen.
(1)