GIONIEN GTM724T Specification sheet

Ceramic Hob
Instruction Manual / Installation Manual
MODEL: GTM724T

2
Safety Warnings
Your safety is important to us.Please read this
information before using your cooktop.
The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities,or lack of
experience and knowledge,unless they have
been given supervision or instruction.Children
being supervised not to play with the
appliance.Cleaning and user maintenance
shall not be made by children without
supervision.
WARNING:The appliance and its accessible
parts become hot during use.
Care should be taken to avoid touching
heating elements.
Children less than 8 years of age shall be kept
away unless continuously supervised.
Warning:If the surface is cracked,switch off
the appliance to avoid the possibility of electric
shock,for hob surfaces of glass-ceramic or
similar material which protect live parts.
Warning:A steam cleaner is not be used.
That the appliance is not intended to be
operated by means of external timer or
separated remote-control system.
Danger of fire:Do not store items on the
cooking surfaces.

3
CAUTION:The cooking process has to be
supervised.A short term cooking process has
to be supervised continuously.
WARNING:Unattended cooking on a hob with
fat or oil can be dangerous and may result in a
fire.
If the supply cord is damaged,it must be
replaced by the manufacturer,its service
agent or similarly qualified persons in order to
avoid a hazard.
Never try to extinguish a fire with water,but
switch off the appliance and then cover flame
e.g. with a lid or a fire blanket.
WARNING:Use only hob guards designed by
the manufacturer of the cooking appliance or
indicated by the manufacturer of the appliance
in the instructions for use as suitable or hob
guards incorporated in the appliance.The use
of inappropriate guards can cause accidents.
Power cord can’t accessible after installation.
Congratulations on the purchase of your new Ceramc Hob.
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.

4
Product Overview
Top View
Heating zone Power
Heating Zone Max.Power（220-240V~ 50/60Hz）
2200W/1100W(230~)
(Double ring)
1200W(230~)
2000W/1100W(230~)
1800W(230~)
Total Rating Power 7200W(230~)

5
User interface
Reference Description
AZone Select Key
BON/OFF Key
CPower Regulating Key(Reduce)
DPower Regulating Key(Increase)
E
Double Ring Control Key
FChild Lock Key
GTimer Key
 -
 
 
  邑
． ． ．
．
．
•••

6
Product functions
> The ceramic hob caters for all kind of cooking,with its radiant heat
cooking zones and its electronic touch controls and multi-functions,
making it the ideal choice for the modern family.
> The ceramic hob is extremely user-friendly,durable and safe.
Special functions
Protection from over-heating
A sensor monitors the temperature in the cooking zones.When the
temperature exceeds a safe level,the cooking zone is automatically
switched off.
Residual heat indicator
When the hob has been operating for some time,there will be some
residual heat. The letter “H” appears to warn you that it is too hot to
touch the surface.
Auto Shutdown Protection
Auto shut down is a safety protection function for your ceramic hob.It shut down
automatically if ever you forget to turn off your cooking.The default working
times for various power levels are shown in the below table:
Power level
1-2
3-4
5
6-9
Default working timer (min)
360
300
240
90
Protection against unintended operation.
If the electronic control detects a button being held down for approx
10 seconds it will switch off automatically.The control sends out an
audible error signal to warn the sensors have detected the presence
of an object. The display will indicate an error code “ER03”.If the hob
is still hot,the display "H" and "0" flash alternatively.

7
Before using your New Ceramic Hob
• Read this guide,taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Ceramic hob.
Using the Touch Controls
• The controls respond to touch,so you don’t need to apply any pressure.
• Use the ball of your finger,not its tip.
• You will hear a beep each time a touch is registered.
• Make sure the controls are always clean,dry,and that there is no object (e.g. a
utensil or a cloth) covering them.Even a thin film of water may make the
controls difficult to operate.
Choosing the right Cookware
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth,sits flat against the glass,and is the
same size as the cooking zone.Use pans whose diameter is as large as the graphic
of the zone selected.Using a pot a slightly wider energy will be used at its
maximum efficiency.If you use smaller pot efficiency could be less than expected.
Always centre your pan on the cooking zone.

8
Always lift pans off the ceramic hob – do not slide,or they may scratch the glass.
Using your Ceramic Hob
To start cooking
1.Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
2.Touch the ON/OFF key for 1 second.
After power on, the buzzer beeps once, all displays
show “ 0 “, indicating that the ceramic
hob has entered the state of standby mode.
3.According to the heating zone where the pan is placed, select a relevant zone
select key by pressing key (A).The symbol 0. selected will be flashing.
4.Select the power level by pressing the “+”key (D) or “-”key(C)
5.The power level will start at 0.Pressing the “+”will count up the power levels
from 0 to 9 in numerical order.Pressing the “-”key will take the power straight

9
from 9 to 0.
• If you don’t choose a heat setting within 20 seconds, the ceramic hob will
automatically switch off. You will need to start again at step 2.
• You can modify the heat setting at any time during cooking.
Using Child Lock Function
• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the OFF control are
disabled.
To lock the controls
Touch the child lock key for 3 seconds.The indicator above the child lock key
will be on and the timer indicator will show “Lo “.
To unlock the controls
1.Make sure the hob is turned on.
2.Touch and hold the keylock control for a while.
3.You can now start using your ceramic hob.
When the hob is in the lock mode,all the controls are disable except OFF,you can
always turn the hob off with the OFF control in an emergency,but you shall unlock
the hob first in the next operation .
Using the Timer
• You can set it to turn one cooking zone off after the set time is up.
• You can set the timer for up to 99 minutes.
1.Select the relevant cooking zone which is working by touching the zone select
key (A).
2.Press the timer key ,the timer indicators will show “10”.
． ． ．
．
．
•••

10
3.Using the “ “ or ” ” buttons,you can realize the setting of timing from 1 to 99
minutes.
4.When the time is set,it will begin to count down immediately.The red dot next to
power level indicator will illuminate indicating that zone has set timer.
5.If you need to check the remaining time,you can operate step 1 and step 2
again.
6.When cooking timer expires, the corresponding cooking zone will be switch off
automatically.Other cooking zone will keep operating if they are turned on
previously.
• The timer function only work when at least one cooking is turned on.
• If you do not select any zone and touch the timer(G) directly to active the timer
function,it only work as a Minute Minder.Buzzer will only bips for seconds and the
timer indicator will turn off when the setting time finished,but cooking zones will
not be switch off and still working .
Using the Double ring zone
> You can set the double ring zone after the zone is working.
> You can set the zone working by double ring or single ring.
1.Turn on,the double ring work by default,the double ring indicator light on.
2.Press the double ring control key(E),the double ring indicator light off,then only
inner ring works.

11
Care and maintenance
Damaged power cables should be replaced by a
competent person or qualified electrician.
For domestic use only.
Never place an empty pan on the hob as this will cause
an error message to appear on the control panel.
When a cooking zone has been on for a long time, the
surface remains hot for some time afterwards so do not
touch the ceramic surface.
For sealed foods, please do not heat them before
opening removing the lid so as to avoid any dangers of
explosion due to heating expansion.
If the surface of the hob is cracked, disconnect from
power supply to avoid any possibility of electric shocks.
Do not place rough or uneven pans on the hob, as they
could damage the ceramic surface.
Avoid banging pots and pans down on the hob.
The ceramic surface is tough but not unbreakable.
Do not put detergents or flammable materials beneath
the hob.
Warning
Always switch off the electricity supply before
performing maintenance work. In the event of a fault,
contact customer services.

12
Appliance cleanliness
> The appliance should be cleaned after use.
> The surface of the ceramic hob may be easily cleaned in the following
way:
Type of dirt Cleaning method Cleaning materials
Lime scale
Apply white vinegar to the surface,
then wipe it dry with soft cloth
Special ceramic cleaner
Burnt-on stains
Clean with damp cloth and dry it
with a soft cloth
Special ceramic cleaner
Light stains
Clean with damp cloth and dry it
with a soft cloth
Cleaning sponge
Melted plastics
Use a scraper suitable for
ceramic glass to remove
residue
Special ceramic cleaner
By means of a scraper immediately remove any aluminum foil bits,food
spills,grease splashes,suger marks and other high sugar content food from
the surface in order to avoid damaging the hob. Subsequently clean the
surface with some towel and appropriate product,rinse with water and dry by
means of a clean cloth.Under no circumstance should sponges or abrasive
cloths be used,also avoid using aggressive chemical detergents such as
oven sprays and spot removers.
Caution
• Avoid rubbing with any abrasive or with the base of the
pans, etc, as this will wear the markings on the top of the
ceramic hob over time.
• Clean the ceramic hob on a regular basis to prevent the
build up of food residue.

13
Trouble shooting
Before calling the customer services,please check that the appliance is
correctly connected,any of the following cases are not covered by the
guarantee
> Damage caused by improper use,storage or maintenance.
> Damage caused by unauthorised disassembly and repair.
> Damage caused by misuse.
> Using the ceramic hob for commercial purposes.
If an abnormality comes up,the ceramic hob will enter the protective state
automatically and display corresponding protective codes:
Error
Message
Possible Cause
What to do
ER03
Water or pot on the glass over the
control
Clean the user interface
ER21
The temperature inside the
produce was too high
The produce must be stopped
and cooling.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the ceramic hob and please contact the supplier.
Technical Specification
Cooking Hob
GTM724T
Cooking Zones
4 Zones
Supply Voltage
220-240V~
Installed Electric Power
7200W(230V~)
Product Size L×W×H(mm)
770X520X50
Building-in Dimensions A×B (mm)
740X490
Weight and Dimensions are approximate.Because we continually strive to
improve our products we may change specifications and designs without prior
notice.

14
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use,a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30 mm.Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate. As shown below:
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
770 520 47 43 740 490 50 mini
Under any circumstances,make sure the ceramic cooker hob is well ventilated
and the air inlet and outlet are not blocked.Ensure the ceramic cooker hob is in
good work state.As shown below
Note: The safety distance between the hotplate and the cupboard above
the hotplate should be at least 650 mm.
H
SEAL
W
D
L
X
B
XX
A
X
D
C
BE
A
！

15
A(mm)
B(mm)
C(mm)
D
E
650
50 mini
20 mini
Air intake
Air exit 5mm
Before you install the hob,make sure that
• The work surface is square and level, and no structural members interfere with
space requirements.
• The work surface is made of a heat-resistant material.
• If the hob is installed above an oven, the oven has a built-in cooling fan.
• The installation will comply with all clearance requirements and applicable
standards and regulations.
• A suitable isolating switch providing full disconnection from the mains power
supply is incorporated in the permanent wiring,mounted and positioned to
comply with the local wiring rules and regulations.
The isolating switch must be of an approved type and provide a 3 mm air gap
contact separation in all poles (or in all active [phase] conductors if the local
wiring rules allow for this variation of the requirements).
• The isolating switch will be easily accessible to the customer with the hob
installed.
• You consult local building authorities and by-laws if in doubt regarding
installation.
• You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the
wall surfaces surrounding the hob.
When you have installed the hob,make sure that
• The power supply cable is not accessible through cupboard doors or drawers.
• There is adequate flow of fresh air from outside the cabinetry to the base of the
hob.
• If the hob is installed above a drawer or cupboard space,a thermal protection
barrier is installed below the base of the hob.
• The isolating switch is easily accessible by the customer.

16
Installation
fig.3
fig.4
Do not use adhesive to fix the hob into the worktop.Once the seal is fitted
position the hob into the cutout in the worktop. Spply gentle downwards
pressure onto the hob to push it into the worktop ensuring a good seal
around the outer edge(fig.4)
Stretch out the supplied seal along the underside edge of the hob,ensuring
the ends overlap.
fig.2
SILICONE
SILICONE
fig.1
Cut out worktop to supplied dimensions shown(fig.1) with suitable
equipment. Seal the cut edge of the worktop using silicone PTFE and
allow to dry prior to fitting the hob.

17
Cautions
1.The ceramic hotplate must be installed by qualified personnel or technicians.
We have professionals at your service.Please never conduct the operation by
yourself.
2.The hob will not be installed directly above a dishwasher,fridge,freezer,
washing machine or clothes dryer,as the humidity may damage the hob
electronics.
3.The ceramic hotplate shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4.The wall and induced heating zone above the table surface shall withstand heat.
5.To avoid any damage,the sandwich layer and adhesive must be resistant to
heat.
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply,check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply,do not use adapters,reducers or branching
devices,as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 90˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without
alterations.Any alterations must only be made by a qualified electrician.
This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow=E or Earth
All installation work must be carried out by a
competent person or qualified electrician.
Before connecting the mains supply ensure that
the mains voltage corresponds to the voltage on
the rating plate inside the cooker hood.
Warning: THIS APPLIANCE MUST BE ARTHED.
！
！

18
This appliance requires a 32 Amp Miniature Circuit Breaker.
• If the cable is damaged or to be replaced, the operation must be carried out the
by after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm between
contacts.
• The installer must ensure that the correct electrical connection has been made
and that it is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians
only.
DISPOSAL: Do not
dispose this product
as unsorted municipal
waste. Collection of
such waste separately
for special treatment is
necessary.
This appliance is labeled in compliance with European directive
2011/65/EU for Waste Electrical and Electronic Equipment (WEEE).
By ensuring that this appliance is disposed of correctly,you will help
prevent any possible damage to the environment and to human
health,which might otherwise be caused if it were disposed of in the
wrong way.
The symbol on the product indicates that it may not be treated as
normal household waste. It should be taken to a collection point for
the recycling of electrical and electronic goods.
This appliance requires specialist waste disposal.For further
information regarding the treatment,recover and recycling of this
product please contact your local council,your household waste
disposal service,or the shop where you purchased it.
For more detailed information about treatment,recovery and
recycling of this product,please contact your local city office,your
household waste disposal service or the shop where you purchased
the product.