Gira 1259 00 User manual
Installation and
Operating Instructions
Add-On Module for
Built-In Loudspeakers
1259 00
2
Device description
With the add-on module for built-in loud-
speakers 12 additional bell buttons can be
connected to the built-in loudspeaker.
Up to 5 add-on modules with 12 bell buttons
each can be connected to the built-in loud-
speaker. With these door communication
systems with up to 70 audio devices can be
realised, e.g.
1 Audio control device
1 Built-in loudspeaker with
5 Add-on modules
68 Surface-mounted, hands-free
feature home stations
The add-on module can only be used in con-
junction with the built-in loudspeaker.
iNumber of devices
The Gira door communication system is
designed for the following numbers of
devices:
Audio: 70 devices,
Video: 20 devices.
3
Device presentation
1 System interfaces:
Connection of the built-in loudspeaker or
other system components
2 Terminal strip
0: Common earth for bell buttons
1 - 12: Connection for bell buttons
3 Mounting tab
1
2
3
4
Mounting
The add-on module can be mounted with a
screw on the mounting tab or with the adhe-
sive pad.
Adhesive mounting
1. Remove the protective foil from the adhe-
sive pad.
2. Press the add-on module onto the desired
mounting point for approx. 12 seconds.
Attention
Installation and mounting of electrical
devices may only be carried out by a quali-
fied electrician.
Attention
When using adhesive mounting, make sure
the surface is oil and grease-free.
5
Connection
1. Connect the add-on module to the built-in
loudspeaker or another add-on module
with the 6-pole audio connection cable.
2. Connect the bell buttons. The
maximum cable length is
2m.
Do not connect "0" terminals
The "0" terminal of the add-on module may
not be connected to the"0" terminal of the
built-in loudspeaker or other add-on mod-
ules.
0
6
Start-up
Once you have installed all of the devices
(built-in loudspeaker, add-on module, home
station, control device etc.), you can put the
door communication system into operation.
Commissioning is described in the system
manual included with the control device.
iNote
When commissioning large systems,
please note that a maximum of 20 bell but-
tons can be temporarily stored per work
step. If more than 20 bell buttons are
installed, at first the initial 20 bell buttons
must be assigned to the home stations.
Then the next 20 or the remaining bell but-
tons are assigned.
7
Acceptance of guarantee
We accept the guarantee in accordance with
the corresponding legal provisions.
Please return the unit postage paid to our
central service department giving a brief
description of the fault.
Gira
Giersiepen GmbH & Co. KG
Service Center
Dahlienstraße 12
42477 Radevormwald
Germany
The CE sign is a free trade sign
addressed exclusively to the
authorities and does not include
any warranty of any properties.
Gira
Giersiepen GmbH & Co. KG
P.O. Box 1220
42461 Radevormwald
Tel +49 21 95- 602-0
Fax +49 21 95- 602-339
www.gira.com
Table of contents
Other Gira Speakers manuals
