Glacier bay HDQFW6AC012CP Assembly instructions

WIDESPREAD LAVATORY FAUCET
SKU#
1008089087
1008089085
1008089080
OMSID#
321486577
321486578
321486583
Model#
HDQFW6AC012CP
HDQFW6AC012BNV
HDQFW6AC012BL
INSTALLATION AND CARE GUIDE
THANK YOU
We appreciate the trust and confidence you have placed in Glacier Bay through the purchase of this lavatory
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY

Table of Contents
Important Information..............................2
Warranty ...................................................2
Pre-Installation.........................................2
Planning Installation...........................2
Tools and Hardware Required.............2
Package Contents...............................3
Installation................................................4
Operation...................................................7
Care and Cleaning ....................................8
Troubleshooting........................................8
Service Parts.............................................9
Important Information
□Observe all local plumbing and building codes.
□Cover the drain in your sink to avoid losing parts.
□Review the care and cleaning section included in this guide.
□This product is engineered to meet the EPA WaterSense flow requirement. The flow rate is governed by the
aerator or flow controller. If replacement is ever required, be sure to replace it with a WaterSense compliant
aerator or flow controller to retain the water conserving flow rate of this product.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.
Simply return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-
434-5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental / inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the
duration of the warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
Pre-Installation
PLANNING INSTALLATION
Before you begin to install this product, ensure that all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service for
replacement parts.
TOOLS AND HARDWARE REQUIRED
Adjustable
wrench
Safety
goggles Sealant Channel-lock
pliers
Phillips
Screwdriver
(2)
Supply
lines
SILICONE
2

Pre-Installation (continued)
PACKAGE CONTENTS
Faucet Assembly Drain Assembly
N*
O*
P*
M*
K
C*
D*
E*
B*
F*
H*
I
G*
A
J
Tool
LNOTE: *Items come pre-assembled.
Part Description Quantity
A Handle assembly - Hot 1
B Aerator 1
C Rubber washer 2
D Metal washer 2
E Guide washer 2
F Rubber spacer 1
G Metal spacer 1
H Lock nut 1
I Quick connecting hose 1
J Faucet body 1
Part Description Quantity
K Handle assembly - Cold 1
LAerator wrench 1
MMain plunger 1
NRubber washer 1
OLock nut 1
PDrain body 1
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
3

Installation
A
A
E
K
K
C
D
E
E
J
J
F
G
H
F
G
H
H
□Shut off the water supply. Remove the old faucet.
□Clean off the mounting surface.
□Remove pre-assembled lock nut (H), metal
spacer (G), and rubber spacer (F) from shank of
faucet body (J).
□Place the faucet (J) through the mounting holes
in the sink.
□Ensure the slot openings of the rubber spacer
(F) and metal spacer (G) face toward the rear of
the sink.
□Secure the faucet (J) to the sink using the lock
nut (H) provided.
1 Installing the faucet assembly 2 Installing the faucet handles
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□Remove the preassembled guide washers (E),
metal washers (D) and rubber washers (C) from
the hot and cold faucet handles (A and K).
□Loosen the screws on the guide washers (E) until
the ends of the screws are flush with the face of
the guide washers (E).
□Insert the hot faucet handle (A) to the left of the
spout and cold faucet handle (K) to the right of
the spout.
□Attach the faucet handles (A and K) underneath
the sink using the rubber washers (C), metal
washers (D) and guide washers (E). Securely
tighten the screws on the guide washers (E).
4

Installation (continued)
2
3
1
K
A
I
J
3 Attaching the quick connecting
hose 4 Connecting the supply lines
□Remove the cap from the quick connect hose.
□Attach the quick connecting hose (I)
connections to the hot faucet handle (A)
connection, faucet body (J) connection, and
cold faucet handle (K) connection. Push until
the connections snap together.
□Pull down moderately to ensure the connection
has been made.
□Use 1/2 in. I.P.S. faucet connections (1), or a
3/8 in. O.D. ball-nose riser (2) with supply line
coupling nuts (3) (not included).
□Use two wrenches to tighten the connections.
Do not over tighten or torque the copper supply
line.
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
5

Installation (continued)
M
N
P
O
□Install main plunger (M), rubber washer (N) and
drain body (P) above the sink.
□From below the sink, install the lock nut (O).
1 Flushing and checking for leaks
5 Installing the drain
6

Operation
3
2
1
1
A
J
K
L
B
CAUTION: Use caution when removing the quick
connecting hose connections in order to prevent cutting
your hands.
□If it is necessary to remove the quick
connector, push the quick connecting
hose (I) up, hold the housing together
and pull down.
IMPORTANT: After installation is complete, remove the
aerator to the flush the water lines. Do not lose the
gasket in the aerator.
□Ensuring the handles are in the off
position, turn on the water supply and
check for leaks. If you discover any leaks,
check your connections to ensure they
are installed properly.
□Use a wrench (L) to remove the aerator
(B) from the faucet (J). Turn on the hot
and cold handles to allow the water to
run for at least one minute. This flushes
away any debris that could cause
damage to internal parts.
□Turn off the water and reinstall the
aerator and housing (if applicable).
1Flushing and checking for leaks
2Removing the quick connector
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
7

Care and Cleaning
Troubleshooting
□To clean, wipe down with a damp cloth and towel dry.
□Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
Problem Possible Cause Solution
There are leaks from the
handle.
□The bonnet nut is loose.
□The O-ring on the cartridge is
dirty or damaged.
□Tighten the bonnet nut.
□Clean or replace the O-ring.
The aerator leaks or has a
reduced water flow.
□The aerator is dirty or mis-fitted.
□The cartridge may be clogged.
□Remove the aerator and check for
debris.
□Remove the cartridge and check for
debris.
□Ensure the aerator is properly
installed.
The spout leaks. □The retainer nut is loose. □Tighten the retainer nut.
The sink drain at the base of
the sink is leaking.
□The sink surface is rough or
irregular.
□Apply additional silicone sealant to
the beveled side of the drain flange.
□Retighten and test for leaks.
The water will not shut off
completely.
□The locking nut is loose or
cartridge is not positioned
correctly.
□Remove the handle and cartridge to
check the rubber seat and spring.
□Tighten the lock nut.
□Clean or replace.
NOTE: Refer to the service parts section in this manual
for a detailed drawing showing the location of the parts
listed below.
8

Service Parts
* Specify Finish
2.
1.
5.1
6.
4.
3.2
5.2
3.1
8.
10.
9.
12.
7.
11.
DATECODE：
DONOT REMOVE
1-888-328-2383
HOT
Many replacement cartridges, aerators, and drain
assemblies can be purchased at your local The
Home Depot store or online at HOMEDEPOT.COM.
Part Description Part No.
1 Metal Handle A069455*
2 Index Botton A66G503
Index Botton(BL) A66G503KP
3.1 Adaptor & Screw-Cold A66D574CZN-H
3.2 Adaptor & Screw-Hot A66D574HZN-H
4 Retainer Nut A016002CP
5.1 Ceramic Disc Cartridge-Cold A507004N
5.2 Ceramic Disc Cartridge-Hot A507003N
Part Description Part No.
6 Handle Base Trim ring A667287*
7Mounting HardwareAssembly A66D900ZN-H
8 Aerator 1.2gpm A66D658N-T*
9 Wrench A031025ZN
10 Mounting Hardware A603233
11 Y Adapter A135141N
12 Push Down Drain A505218*
Faucet ID Tags can be found
on the hot supply line.
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for
further assistance.
9

Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.