Glasdon ORBIS POST MOUNTING KIT User manual
1
ORBIS EXTENDED POST BRACKET
Installation Guide
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
A. B. C.
Offer Rear Bracket (1) into
position on the post, ensuring it is
in the correct orientation.
Tighten the parallel
Grub Screws (2*) to secure
Bracket in place.
Offer Extended Bracket (3*) into
position, and feed the Long M8
screws (4), with M8 washers (5)
through xture holes from secured
Rear Bracket side.
Ensure that personnel carrying out this installation have the relevant
qualications/certicates.
Ensure that all relevant personnel read the points listed within this leaet and
that a copy is given to staff involved with the installation and maintenance of
this product.
Please refer to ‘The Manual Handling Operations Regulations 1992’.
Glasdon recommends that a full Health and Safety analysis is carried out prior
to installation.
!
KIT CONTENTS
1 - Ø40/50/60mm Rear Bracket x1
2 - M6x16 Grub Screws x2 *
3 - Ø40/50/60mm Extension Bracket x1 *
4- M8 Long Socket Button Screw x4
5- M8 Washers x8
6- M8 Nyloc Nut x4
* Extension kit only (for Orbis with Lid)
EQUIPMENT REQUIRED
- Ø13 Spanner
- 5mm Allen Key
- Personal Safety Equipment (gloves, safety boots etc.)
23
4
5
1
Illustrations are for ‘Extended’ kits (ie Orbis with lift up Lid).
For Orbis without the Lid, Items 2 and 3 are not required or included
ORBIS POST MOUNTING KIT
FOR Ø40/50/60mm POSTS
ORBIS EXTENDED POST BRACKET
2
D.
G.
E.
H.
F.
Offer Orbis Ring into position
ensuring exposed M8 screws (4)
enter the xtures holes.
...and using a Ø13 spanner to
fasten the Nyloc Nuts (6) within
the Orbis Ring.
Loosely fasten the Orbis Ring to
the post using M8 washers (5)
and Nyloc Nuts (6).
Review the nal assembly to
ensure a robust and secure
xture.
Tighten each of the four xtures
by securing the Screw with an
Allen key on the Rear Bracket
side....
Glasdon U.K. Limited
Preston New Road
BLACKPOOL
Lancashire FY4 4UL
Tel: 01253 600410
Fax: 01253 792558
email: [email protected]
web: www.glasdon.com
AND ORBIS ARE TRADEMARKS OF GLASDON GROUP OR ITS
SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES
•A planned maintenance schedule of regular inspection is recommended, replacing
components as necessary.
• Replacement components are available direct from GLASDON UK LIMITED.
• GLASDON UK LIMITED cannot be held responsible for claims arising from incorrect
installation, unauthorised modifications or misuse of the product.
Issue August 2013 C000/0432
© Copyright 2013
Glasdon UK Ltd reserve the right to alter specifications without prior notice.
4
6
5
6
Issue 4 ... July 2015 C000/0432 07B324-100
2015
ORBIS POST MOUNTING KIT
FOR Ø40/50/60mm POSTS
