Global Contract FreeFit ECS+ Handset User manual

Visit us on the Internet at globalcontract.com • [phone]
ISO 9001:2015OHSAS 18001:2007 ISO 14001:2015 Global Contract Inc. 565 Petrolia Road
North York, Ontario, M3J 2X8
REVISED: SPRING 2019
FreeFit
ECS+ Handset
Manual
2019

Page • globalcontract.com2
• Spring 2019
GLOBALContract
User Manual for ECS+ Handset Display
Connect the handset
Display layout
Settings
Mount the handset
This manual is a quick guide of the
functionality for the ECS+ Handset Display.
This handset is intended to be used with ECS+ control box only.
Use the 2 attached screws for fixing to the table top. If the thickness
of the table top is less than 0,72 inch (18mm) please use shorter
screws.
Connect the cable to the ECS+ box.
Explanation of the symbols.Handset Layout
10 sec -sleep mode:
The display will go to sleep mode after 10
sec of interactivity.
By pressing Up and Down buttons simultaneously
you enter the Settings menu.
You are now able to step between the Settings menu
with the Up and Down button.
To exit the menu have the following steps in this order:
Err
ECS
SOF
rES
SL
SU
CAL
Un - Settings menu entry level
Exit
To enter an menu, press Up and Down button
simultaneneously.
Menu mode
Memory
Error codes
Reset
Imperial, Inch
Thermometer
Metric, Centimeter
• January 2015

•Pageglobalcontract.com 3
• Spring 2019
GLOBALContract
Wheel Controls
How to set memory:
Run/Drive the table to the position you will store,
sitting or standing.
(This device have 5 memories position memories)
Press menu button + “stand” icon 1 time to come
to set memory menu.
Calibrate:
Measure the distance between the floor and the top
of the table sheet.
Press menu button + “stand” icon 2 times to come
to calibrate menu.
Use arrow up and down to navigate to set memory
setting.
Press Menu/Enter, and the value are stored.
The display confirm by flashing 3 times and then
returns to normal mode.
Press Menu/Enter to confirm
Press Menu/Enter to confirm
Press Menu/Enter, and the value are stored.
Press Menu/Enter, and the value are
stored.
Adjust the figures to the selected value with the
arrows up or down.
1
5
CAL
28
.
0
Upper limit:
Set the upper limit if there are limited
space in height.
Press menu button + “stand” icon 3
times to come to set memory menu.
Units:
Choose between metric or imperial
system.
Press menu button + “stand” icon 5
times to come to set memory menu.
Error codes:
Reset Away:
Press menu button + “stand” icon 6
times to come to set memory menu.
Lower limit:
Set the lower limit if there are device/
equipment which could create a risk
of pinching or risk for table damages.
Press menu button + “stand” icon 4
times to come to set memory menu.
Adjust the figures to the chosen level
with the arrows up or down.
Press Menu/Enter to confirm. Press Menu/Enter to confirm.
1. Hard stop
2. Back off
3. Soft top
4. Waiting for button
5. Waiting for button release.
6. Motor lost
Overheating. Thermometer flashing,
wait 10 minutes for motor cooling.
Adjust the figures to the chosen level
with the arrows up or down.
Adjust the figures to the chosen level
with the arrows up or down.
Press Menu/Enter, and the value are
stored.
Press Menu/Enter, and the value are
stored.
Press Menu/Enter, and the value are
stored.
Press ‘down” and hold until the columns
have gone to the lowest position.
Do reset if any parts have been changed
of if you discover interference between
the columns.
Please note that the figures count
from the table top surface.
Please note that the figures count from
the table top surface/ calibrated level.
UL
50
.
0
LL
27
.
5
UN
RES
3

Page • globalcontract.comH.14
• July 2012
GLOBALContract
THE GLOBAL GROUP SHOWROOM
1350 Flint Road, Toronto, Ontario, M3J 2J7
Sales & Marketing • TEL: [phone] • FAX: [phone]
Customer Service • TEL: [phone] • FAX: [phone]
VANCOUVER SHOWROOM
675 West Hastings Street, Suite 1000, Vancouver, BC, V6B 1N2
EDMONTON SHOWROOM
201-10158 103 Street N.W. Edmonton, Alberta, Canada T5J 0X6 • TEL: [phone]
CALGARY SHOWROOM
302 8 Avenue SE Calgary, AB, T2G 2M3 • TEL: [phone]
WINNIPEG SHOWROOM
220-111 Lombard Avenue, Winnipeg, MB, R3B 0T4 • TEL: [phone]
OTTAWA SHOWROOM
251 Laurier Avenue West, 4th Floor, Ottawa, ON, K1P 5T6
MONTREAL SHOWROOM
980 St-Antoine Street Ouest Montreal, Bureau 200, QC, H3C 1A8 • TEL: [phone]
HALIFAX SHOWROOM
1061 Marginal Road, Suite 120, Halifax, Nova Scotia, B3H 4P7 • TEL: [phone]
QUEBEC SHOWROOM
Complex Lebourgneuf 2, 815, boul. Lebourgneuf, Suite 502 Quebec, QC, G2JOC1 • TEL: [phone]
Visit us on the Internet atglobalcontract.com
ISO 9001:2015OHSAS 18001:2007 ISO 14001:2015