Global Fire Equipment GFE-PA-VOX-C User manual
GFE-PA-VOX-C
INSTRUCTION MANUAL V.1 02/2015
Enclosure Construction Material
White or Red ABS
Flame Retardant rating 94V0
Weight
Module - 30 g
Boxed - 125 g
Including packaging - 160 g
MECHANICAL SPECIFICATION
FEATURES
Message Programming
via USB interface
Multi-Language
120 dB maximum sounder
output at 1 m
Synchronization
for fast activation
Compatible with most
conventional panels
TECHNICAL SPECIFICATIONS
SUPPLY VOLTAGE
SOUNDER CIRCUIT - CURRENT
EXTERNAL SUPPLY - CURRENT
POWER OUTPUT MAX.
MAX. CABLE SIZE
MAX. HUMIDITY
OPERATING TEMPERATURE
ENCLOSURE - MATERIAL
PROTECTION CATEGORY
DIMENSIONS
WEIGHT
Loop:17-30 V DC - External Supply: 20-30 V DC
2.0 mA (Sounder Active)
5.0 mA (Quiescent) - 1.0 A (Sounder Active)
24 Watts rms
2
2.5 mm
85% RH Non-Condensing
-10ºC to 50 ºC
White or Red ABS
IP44
100 (D) x 48 (H) mm
125 g - 160 g including packaging
ORDER CODE DESCRIPTION
Conventional Voice Controller/Amplifier
GFE-PA-VOX-C
Conventional Voice
Controller/Amplifier
48
100
NOTE: All dimensions in mm
Made in Portugal-EU
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL
Tel: +351 289 896 560 • Sales: [email protected] • Technical Support: techs@globalfire.pt • www.globalfire.pt
The GFE-PA-VOX-C is a conventional PA
Speaker Controller/Amplifier which is
available in either Red or White housings.
The GFE-PA-VOX-C is able to provide a
maximum of 24 W of sound output to a
single PA Speaker.
The GFE-PA-VOX-C, can broadcast pre-
loaded messages. The desired message can
be downloaded from our own proprietary
recording PC application, via a standard
USB interface. This product is controlled by
a conventional sounder circuit and
externally powered.
In order to indicate the status of the module’s working
condition, 3 LEDs are provided:
STATUS: This LED will flash Green, while the
conventional sounder circuit is active.
FAULT: The Yellow LED will be ON when there is a fault
in the module.
FIRE: This Red LED will be illuminated intermittently
whenever the speaker is active.
Sounder
Circuit
PANEL
+24V DC
GND
To next device
in sounder circuit.
End-of-line device should be
connected to last device on
sounder circuit. Please always
follow panel manufacturer
instructions.
STATUS
ZONE & EXT. SUPPLY CONNECTIONS
SPEAKER CONNECTION
USB CONNECTOR
Maximum
Load Allowed
1 x 8 Ohm
24 Watt rms
or
2 x 16 Ohm
12 Watt rms
Note: This device is polarity sensitive.
USB CONNECTOR
Use USB connector in conjuction with
GFE’s Vox Loader PC Software to
program new tones and voice messages.
Software can be downloaded from
our website www.globafire.pt
