Global Light & Power LCC ARGI-BL220135 User manual

www.globallightllc.com [e-mail] Fax: [phone]Tel: [phone]
PRODUCT FEATURES
Fixture Material Aluminium
Fixture Finish Powder-coated Bronze
Glass Semi-frosted UV resistant
polycarbonate
Driver Built-in
Binning 3 Step MacAdam
Wiring 30 Centimeter of 3 core
0.75mm2rubber cable
Life Span 50,000 hours
LED Chip Nichia
Power Consumption 9W
Input Voltage 180~250V AC, 50/60Hz
Operating Temperature from -20°to 65°C
Color Rendering Index >85
Driver Protection Short circuit
Warranty 3 years against manufacturing
defects
Agency Approval CE , RoHS
ARGI-BL220135
9W BOLLARD LIGHT
Power
(W)
Available color
Temperatures
Luminous Flux IP Rating Available
Beam Angles
3000K 4000K 6000K
9W
2700K
3000K
4000K
6000K
110lm/W 120lm/W 130lm/W 65 60°
Standard option.
Non-standard products may be subject to MOQ. Contact your regional sales representative for more information.

www.globallightllc.com [e-mail] Fax: [phone]Tel: [phone]
INSTALLATION GUIDE
Step 3
Please kindly read the instructions carefully before
installation, and keep it well for your future reference.
Step 4
Step 8
Step 6 & 7
•Step 1: Find the location where the bollard light has to be installed.
•Step 2: Install suitable wiring from the main supply (220V-240V AC, 50/60Hz) to the light fixture.
•Step 3: Unscrew and Remove the bottom plate of the fixture.
•Step 4: Mount the bottom plate of fixture on to a hard surface using stainless steel screws .
•Step 5: Attach a junction box near by the fixture and make all the connections inside the junction box
•Step 6: Connect the fixture power cable to the main supply (220-240V AC, 50/60Hz) using terminal blocks
or connectors. Please make sure the earth (ground) wire is reliable.
•Step 7: Wrap connectors or terminal blocks with 3M waterproof tape & electrical tape.
•Step 8: Install the fixture body to the bottom plate of the fixture.