Global Sat GD-101 User manual

GPS Director
GD-101 Quick Start Guide
Version1.0

2
Accessories
GD-101Main Unit
Quick Guide
Hang tape
CD
NOTE：
If any accessory is not included or damaged, please contact the local dealer.
Appearance
Front view and Back view
➊Display Shows the GPS fix status, power level, destination direction and distance
➋Battery Cover Open the battery cover by rotating it according to the arrow.
➌Power/Backlight
Button
Short-click (1sec): Turn on backlight.
Long-click (2sec):
1. Power off device under main screen.
2. Return to last page under each setting screen.
➍Selection/
Setting Button
Short-click (1sec): To select.
Long-click (2sec): To set.
Make GD-101 enter main screen by long clicking Power/Backlight Button and
Selection/ Setting Button at the same time.

3
START TO USE
Install Battery Magnetic North Adjustment
Open Battery cover Loosen the cover
Install Battery
Lock the cover
1. When using GD-101 for the first time,
GD-101 will automatically perform the
magnetic-north adjustment as seen in the
screenshot below.
2. For the method of adjustment, please refer
to User Manual Chapter 3-2.
3. If GD-101 shows the incorrect or
inaccurate direction, please perform the
magnetic adjustment by operating the
function button.
MAIN Screen
Icon Explanation
The GPS fix indication will keep ON when
device gets a GPS fix. GPS fix indicator will flash
when device does not have GPS fix.
The distance between GD-101 and destination will
only be shown/ displayed when device has GPS
fix.
The direction of the setting destination of GD-101.
The arrow will direct to the destination after
GD-101 has GPS fix and has performed the
magnetic-north adjustment.
What is shown on upper right corner is the battery
power level

4
Automatic Setting the Destination
Description
1. Under direction indication screen, click Selection/ Setting button
to select and set the following 5 destination’s coordinates.
2. After GD-101 has GPS fix, long click Selection/ Setting button will
save the present coordinates as the selected destination’s
coordinates.
While GD-101 is saving coordinates, GD-101 will display as seen in
the screen shot to the left and then return to the direction indication
screen.
If you try to save the present coordinates under no GPS fix status,
GD-101 will display as seen in the screenshot to the left and then
return to the direction indication screen.
Manual Setting Destination’s Coordinate
In the direction indication screen, you could make GD-101 enter main screen by long clicking
Power/Backlight Button and Selection/ Setting Button at the same time.
ICON Function Operation
Long click Selection/Setting button to enter
setting screen.
You could set the following 5 destination’s
coordinates.
Manual Set
Destination’s
Coordinate

5
Setting Destination’s Coordinate
ICON Explanation
Set Home’s coordinates. The indication will be ON when
the destination’s coordinates are set.
Set Building’s coordinates. The indication will be ON when
the destination’s coordinates are set.
Set Car’s coordinates. The indication will be ON when the
destination’s coordinates are set.
Set Travel’s coordinates. The indication will be ON when
the destination’s coordinates are set.
Set My Favorite’s coordinates. The indication will be ON
when the destination’s coordinates are set.
Setting Destination’s Longitude
1. The upper left corner is the selected destination. The number is the
setting longitude (East or West). An arrow will be indicated to the
number on the initial screen.
2. Short click Selection/Setting button to select the number. Long
click Selection/Setting button to enter the selected value and move
to the next digit for setting.
3. The maximum setting is 180 ° 00 ’00 . 00 ”
Setting Destination’s Latitude
1. The upper left corner is the selected destination. The number is the
setting longitude (North or South). An arrow will be indicated to the
number on the initial screen.
2. Short click Selection/Setting button to select the number. Long
click Selection/Setting button to enter the selected value and move
to the next digit for setting.
3. The maximum setting is 90 ° 00 ’00 . 00 ”