Global Sat GH-561 GPS TREK PRO User manual

Outdoor GPS Device
GH-561 GPS Trek Pro
Quick Start Guide
1
2
3
5
6
4
POWER / LIGHT
MARK W.P. / ESC
FIND WAYPOINT
TRACK BACK
SCROLL
OK

GlobalSat
www.globalsat.com.tw
What is GPS?
GPS stands for Global Positioning System. For 3D fix, we need at least
four satellites. Normally the accuracy of GPS under open sky which
means no tall building and clear sky is within 10 meters per second.
Therefore, if the device shift 10 meter at that second, the device may
shows 36 kilometer per hour instant speed. Nowadays, the GPS
consumer product has built in adjust algorithm and assisted method
to extend capability of GPS.
What is IPX4?
The IPX4 waterproof standard is for device to protect against
splashing water without any adverse operational effects. Waterproof
standards usually measure by the pressure of water. IPX4 standard
provides device protection for under raining weather, and spray water.
The consumer usually misunderstands the waterproof standard of
IPX4 and misuse the IPX4 device with water activities like swimming.
However, the pressure of swimming usually exceeds IPX4 standard.

Note!!
Do not near fire or lay on magnetic source
avoiding e-compass aging.
Please fully charge before first use.
Considering waterproof, no decompose
by yourself.
Please wipe USB connect inside before
charging and plugging to prevent damage
device.
Symbol Explanations
GPS status indicator
zNone: No signal
zSolid: 3D fix

zSolid with 1 bar: 3D fix with poor signal
zSolid with 2 bar: 3D fix with good signal
zSolid with 3 bar: 3D fix with strong signal
Battery capacity indication
E-Compass status indicator
- Blinking: E-Compass got magnetic interference or
unstable, it needs to calibrate at this situation.
How To Start a Route
1. Press button to select the
route you’ve planed on PC
software( Travel Manager)
2. To select the route files for
traveling.
3. Press to select
‘’BACKWARD’’ or ‘’ FORWARD’’ or
‘’DELETE’’

4. The display will show direction and
remain distances and needed time
to destination accordingly.
-Solid arrow means system is at 3D
fix
-Blank arrow means system is GPS
no fix and at e-compass navigation
mode.
5. When near to destination, system
will advise you, if you want to stop
during duration, press button,
system will ask if you want to exit
route or not
How To Find Waypoint
1. Press button to choose the
waypoint you’ve saved to go.
2. Press button to choose the
waypoint you’ve saved.
3. The display will show the direction
and remain distance and time
needed to destination..

Hot Key for the Settings
1. On compass screen, press +
simultaneously
2. The setting information is including
-Compass Setting
-Setup Time
-Display Setting
-GPS Info
-Factory Reset
-About
Press will go into selected page
Press will exit
Notice: You can set the time zone, check GPS receiving status at this
page and set contrast of display, the most items are not necessary to
change.
Hot Key for E-Compass Calibration

1. On compass screen, press
+ simultaneously
2. Follow the instruction to
calibrate X & Y axis first
3. Calibrated X & Y axis, continue
to calibrate Z axis
3. When you finished X/Y/Z axis
calibration, the display will
show ‘’ Calibration OK’’.
4. Press will return to
compass display’.
Notice: Usually, system will calibrate e-compass automatically after
power on. It doesn’t need to have a calibration every time, unless got
magnetic interference or base on particular request.