Global Solutions GS1630 User manual

Physical Address: Corporate HQ
301 Meuse Argonne | Hicksville, OH 43526
800.782.6761 • 419.542.7751 • f: 419.542.6690
Global Solutions Distribution Center/Test Kitchen
4300 E Magnolia Street | Phoenix, AZ 85034
November 10, 2020
globalsolutionsfoodequipment.com
OPERATING INSTRUCTIONS
Introduction :
1. Please read instructions before using this appliance.
2. When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock and
injury.
3. Clean machine thoroughly before and after each use following
the cleaning instructions provided below.
Electrical Requirements :
Refer to the product tag (serial plate) on the back of the unit for
voltage and wattage requirements. Be sure to plug unit into
grounded outlet with sufficient power.
WARNING: DURING NORMAL OPERATION, THE EXTERIOR
OF THE UNIT IS HOT!
Preparation :
1. Remove all packing pieces and lift unit out of the box.
2. Remove any outside packaging.
3. Set unit on a flat, stable, solid surface and position itaway from
any water source.
4. Position the unit near a power outlet. Avoid the use of
extension cords. Do not run cord under carpeting or cover
with runners or the like Plug heat unit into a grounded outlet
with correct voltage and sufficient power capacity. Refer to the
product label (serial plate) on the lamp for voltage and wattage
requirements.
5. Do not use if there are problems with the product or power
supply.
6. Do not use if there is damage or a malfunction after the product
is accidentally dropped.
7. If unit fails to work properly when first operated call Global
Solutions customer service at 1-800-782-6761.
Rice Cooker/Warmer
Model Series:
GS1630
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Warning! All power must be disconnected at power source
before any service procedure is performed.
2. Check whether the specified power supply voltage of the
product matches the power supply (AC only).
3. Use a grounded wall socket and insert the plug. Do not use
the universal socket with other electrical appliances at the same
time.
4. When disconnecting the plug, hold the plug to pull out. Do not
yank out or twist to unplug the power cord from the socket.
5. If the power cord is damaged, it must be replaced by a
qualified service agent.
6. Insert the plug into the back of the socket, otherwise the
components may fail prematurely due to overheating caused by
poor contact.
7. Always unplug appliance when not in use and before cleaning.
8. Extreme caution is necessary when any appliance is used
near children and whenever the appliance is left unattended.
9. Do not use this appliance on uneven, damp or heated surfaces
to avoid damage or malfunction.
10. Do not start the operation when the liner in not in the main
machine or the liner is empty.
11. Do not remove the liner while the product is on.
12. Do not place the product directly on a fire or in places near
any heat or ignition sources.
13. Do not place the liner directly on other heat sources for
heating, such as a gas stove.
14. Do not directly touch the metal parts of the product while unit
is operating.
15. Do not put any food or water in the main machine before the
liner is placed inside.
16. Put proper amount of food in accordance with the capacity of
the liner. Please do not over-fill the liner in case of foods spills.
17. Keep the bottom and edge of the liner clean. There should
be no water droplets or debris attached to the surfaces of the
bottom of the liner and the heating plate. The liner cannot be
tilted; otherwise the components may fail prematurely due to poor
contact of the heating plate and liner.
18. While in use, the product will produce high temperature and
steam. Do not put hands and face near the steam port. Do not
cover the lid with a damp cloth. In addition to the liner, water
injection and soaking of any other parts of the product are
prohibited.
19. Unplug the unit after use and each time before cleaning and
maintenance.
20. The appliance should not be cleaned with a water jet.

Physical Address: Corporate HQ
301 Meuse Argonne | Hicksville, OH 43526
800.782.6761 • 419.542.7751 • f: 419.542.6690
Global Solutions Distribution Center/Test Kitchen
4300 E Magnolia Street | Phoenix, AZ 85034
November 10, 2020
globalsolutionsfoodequipment.com
Product Features :
1. Microcomputer control, more accurate temperature control and
better insulation effect.
2. Temperature can be adjusted. Adjust corresponding hold
temperatures for different foods.
3. Function of steaming that will steam different foods.
4. Digital display window that enables a more intuitive display of
the corresponding function and temperature.
5. Simple operation panel, making it easy to operate.
6. Food-grade stainless steel liner: keeps the foodwarm and easy
to clean.
Operation :
Step 1
1. Plug cord into grounded electrical outlet of the correct voltage.
2. After all the lights on digital screen are on for 1 second, the
machine enters the standby mode, and the digital screen will
scroll HELLO characters.
3. Press the ON/OFF button, the product enters the working state.
Then press the function keys to select desired function.
Step 2
4. Press the ON/OFF button to select the function. The digital
screen flickers the NO-A function.
5. Press the FUNCTION buttons in cycle, the product displays the
function NO-A, NO-B, NO-C and NO-D in turn.
6. If no function is selected after six seconds the cooker operates
at the default setting.
Step 3
7. Select function NO-A, NO-B, or NO-C, and press up arrow or
down arrow to adjust the set temperature. Return to the
function name after releasing it for 2 seconds. Product begins
to work after 4 seconds. Function name and the set
temperature switch alternately.
8. Select function NO-D and press up arrow or down arrow to
adjust the set time. Return to the functionname after releasing
it for 2 seconds. Product begins to work after 4 seconds,
displays the dynamic icon of steam, and timing begins after
water boils.
Preparation Before Use :
1. Be sure to wipe off the water drops and debris from the outside
of the liner and the inside of the pot to ensure that the inside
and outside of the insulation pot are kept clean.
2. When putting the liner into the insulation pot, gently rotate the
liner towards left or right a few times, so that the liner and the
heating plate inside the insulation pot fit more closely, which is
conducive to more even heat.
3. Select the appropriate function according to the density of food.
Warming Function :
Pour the cooked food into the liner of the insulation pot,
press the ON/OFF button after power on press on press
the function buttons to select the function according to the
different food, and press up arrow or down arrow buttons
to set the temperature and time.
•NO-A Use for low density food—default
temperature of 185°F; temperature adjustment
range of 140 –185°F
•NO-B Use for medium density food —
default temperature of 176°F; temperature
adjustment range of 140 - 185°F.
•NO-C Use for high density food —default
temperature of 158°F; temperature adjustment
range of 140 - 185°F.
•NO-D Use for food steaming—The default
setting is 5 minutes of steaming after water boils,
with the time range of 5-60 minutes. After cook
time is complete or the water is boiled away,
machine will beep 5 times and enter into warming
mode.
NOTE :
1. When using Rice Cooker to keep food warm stir
regularly, otherwise the food may sick to the bottom.
It is recommended to stir food with low density per
hour; for food of medium densitystir every40 minutes;
for food of high density stir every 20 minutes.
2. This product cannot be used to directly cook mushy
food such as porridge.
Cleaning :
NOTE: Proper maintenance plays an important part in the
life span and functioning of the warmer.
1. Odor residues are likely to exist after the cooker is
used, so be sure to clean the same day.
2. Before cleaning and maintenance, make sure that the
rice cooker is turned off and is fully cooled.
3. Please use a clean and absorbent soft cloth with mild
soap and water to wipe the outer cover, upper cover
and other parts to keep the pot clean. (Note: Please
do not wipe the operation panel, plug and power cord
with wet soft cloth.)
4. Do not use corrosive chemical liquids or hard objects
to clean the inside and outside of the product.
5. Water is strictly prohibited inside the electrical
appliance. Please do not immerse the insulation pot
in water or put in the dishwasher.
6. Water or other debris may be attached to the heating
plate. Please wipe it with a drycloth, and donot wash.

Physical Address: Corporate HQ
301 Meuse Argonne | Hicksville, OH 43526
800.782.6761 • 419.542.7751 • f: 419.542.6690
Global Solutions Distribution Center/Test Kitchen
4300 E Magnolia Street | Phoenix, AZ 85034
November 10, 2020
globalsolutionsfoodequipment.com
REPAIR :
To avoid serious injury or damage, do not repair the induction
cooker or replace a damaged power cord yourself. Repairs mustbe
coordinated through: Global Solutions customer service at 1-800-
782-6761.
TROUBLESHOOTING :
Fault Phenomenon
Possible Causes
Solutions
Screen not bright
1. Power supply circuit not connected.
Check if the power supply is connected
2. Circuit fault
Contact Global Solutions customer service
Heating plate not
heating
1. Fuse burn out
Contact Global Solutions customer service
2. Heating plate fault
Low holding
temperature
1. Liner not in place
Rotate the liner gently to bring it back to normal
2. Foreign matter between the liner and the
heating plate
Clean the foreign matter, but do not wash it with water
directly
3. Deformation of the liner
Contact Global Solutions customer service
4. Circuit fault
5. Sensor fault
Food stuck to bottom
1. Liner not in place
Rotate the liner gently to bring it back to normal
2. Food not stirred for a long time
Stir food
3. Deformation of the liner
Contact Global Solutions customer service
4. Circuit fault
5. Sensor fault
Buzzer ring 10 times,
Digital flash show
E1/E2/E3/E4
1. Liner not in place
Rotate the liner gently to bring it back to normal
2. Foreign matter between the liner and the
heating plate
Clean the foreign matter, but do not wash it with water
directly
3. Circuit fault
The temperature sensor is open or shorted, or the input
power is not correct. If after adjusting the power and switch
on again, the fault still exists, contact Global Solutions
customer service