Global 641287 User manual

U RIGHT VACUUM
12-INCH CLEANING ATH
Model 641287Global Equipment Company
Call 1-800-645-2986
globalindustrial.ca
Distribucion Industrial Globales S DE RL DE CF
Assembly Instructions Instrucciones de Ensamblaje Directives d’assemblage
g
glo
Assembly Instructions
Customer Service
US: 1-800-645-2986
globalindustrial.ca
Assembly Instructions Instrucciones de Ensamblaje
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
México: 01.800.681.6940
globalindustrial.ca
Instrucciones de Ensamblaje
Servicio de atención al Cliente
México: 01.800.681.6940
Distribucion Industrial Globales S DE RL
Instrucciones de Ensamblaje
Servicio de atención al Cliente
ectives d’assemblageDir
Service à la clientèle
Canada: 888-645-2986
DE CFDistribucion Industrial Globales S DE RL
ectives d’assemblage
Service à la clientèle
Canada: 888-645-2986
US: 1-800-645-2986US: 1-800-645-2986 México: 01.800.681.6940
México: 01.800.681.6940 Canada: 888-645-2986Canada: 888-645-2986

IM ORTANT SAFEGUARDS
When usin an electrical appliance, basic precautions should always be followed,
includin the followin :
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
SAVE THESE INSTRUCTIONS
Do not use outdoors or on wet surfaces.
Do not use with dama ed cord or plu . If vacuum cleaner is not workin
as it should, has been dropped, dama ed, left outdoors or dropped into
water, return it to a service center before usin .
Close supervision is necessary when any appliance is used by or near
children. Do not allow vacuum cleaner to be used as a toy or to run
unattended at any time.
Keep hair, loose clothin , fin ers, feet and all parts of body away from
openin s, rotatin a itator and other movin parts.
Do not operate cleaner in bare feet or when wearin open toe shoes or
sandals.
Do not pick up anythin that is burnin or smokin , such as ci arettes,
matches, or hot ashes.
Avoid pickin up hard, sharp objects with the cleaner. They may dama e
the cleaner and the ba .
Do not use without dust ba or dirt cup in place. Shake ba and empty
dirt cup frequently when pickin up very fine materials such as powder.
Use extra care when cleanin on stairs.
Do not put any objects into openin s. Do not use with an openin blocked.
Keep free of dust, lint, hair or anythin that may reduce air flow.
Do not pull or carry by cord, use cord as a handle, close door on cord or
pull cord around sharp ed es or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.
Always disconnect cord from electrical outlet before servicin the cleaner.
Unplu cleaner when not in use. Turn off all controls before unplu in .
Do not unplu by pullin on cord. To unplu , rasp the plu , not the cord.
Never handle plu or appliance with wet hands.
1

HOW TO ASSEMBLE THE GLOBAL INDUSTRIAL VACUUM
A Unpack The Enclosed acket
Enclosed in a packet are two nut and bolts
for the handle and one upper (lar er) and
lower (smaller) plastic cord hooks. An extra
drive belt is included.
B Assemble Handle
Place lower handle into the handle
socket. Take upper handle and slide
on top of lower handle. Make sure
holes ali n for nut and bolts. Make
sure upper handle curves towards
back of vacuum cleaner. Insert nut
and bolts and ti hten.
C Upper Cord Hook And Lower Cord Hook Assembly
Take lower cord hook with vacuum facin frontwards and snap into slot on
lower handle with hook facin down. Make sure cord is in cord slot before
clip is snapped in. Take upper cord hook and place cord with sprin retainer
into slot and snap in. Wrap cord around cord clips.
1. Place Inner tab
into slot
2. Press hoo
around handle
3. SNAP opposite inner
tab into place
BAG
SUPPORT
HOOK
spring
upper handle
cloth bag
lower handle
lower clip
upper clip
B
A
D
C
2

D Install The Bag
Take lower part of cloth ba with latch and ba adapter clip and ali n with back
of vacuum. Brin the ba collar forward and turn latch so ba locks onto the rivet.
Take sprin from cloth ba and attach to support on upper cord hook.
3

HOW TO USE VACUUM
The GLOBAL INDUSTRIAL vacuum cleaner is desi ned to be used on many types
of carpetin and floor.
A Adjusting Handle Back and Forth
Simply step on the wide area foot release pedal and lower handle. Press down
a ain and handle will o down to floor level. This will enable you to clean
underneath furniture.
B On/Off switch foot activated
Step on the power switch located on
top of the heavy duty metal hood. Press
down with foot and power will o on.
Step a ain on the top of the switch and
power will shut off.
C Electric cord storage
Always wrap cord around cord hooks and fasten cord to prevent unwindin .
4

Large, Easy to Turn Adjustment Knob For Carpet ile Height
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts
of body away from any moving part (such as the revolving brush). Turn off the
switch and unplug the cleaner before changing the cleaner height setting.
Adjust the vacuum cleaner hei ht settin to match the carpet pile hei ht. Refer to the
followin chart of recommended settin s for carpet types.
While vacuum cleaner is off and unplu ed from the outlet, turn the extra lar e
adjustment knob to desired settin . If vacuum is hard to push on settin while in
operation, simply shut off cleaner and unplu from outlet. Turn dial to next settin and
continue testin the settin until vacuum is comfortable to move and effective cleanin
is desired.
5

Maintenance
Disconnect vacuum from electrical outlet before attempting to service it in any
manner.
The instructions iven in this booklet serve as a uide to routine maintenance. To avoid
unnecessary service calls, check the ba , belt and brush roll often.
Clear Fan Chamber Instructions
The removable clear fan chamber enables the user of the vacuum cleaner to
observe if any obstructions, dirt buildup, broken fan, broken belt or any other
maintenance issue needs to be addressed. It is recommended that a qualified
vacuum repair specialist repair maintenance issues.
CAUTION: When chan in the belt please be careful. The pulley is heated after
motor was runnin .
6

7
Brush Roll Belt
When to replace belt.
NOTE: Turn off the switch and unplug the electrical cord before replacing belt.
Belt pulleys can become hot during normal use. To prevent burns, avoid
touching the belt pulley when servicing the drive belt.
The belt on the vacuum drives the brush roll to clean the carpet. Make sure to check if
the belt is not stretched, cracked or worn. It is recommended to chan e the belt if any
of the above should happen.
IM ORTANT: Improper installation of the brush roll or brush roll belt could cause
carpet or cleaner damage.
A. Turn back locks to remove metal
bottom plate.
B. Remove belt from pulley. Lift up
brush roll and remove from
vacuum, take off belt.
E. ull belt over pulley and set. Rotate pulley to make sure belt is riding
smooth on motor pulley.
F. ut bottom plate back on and lock back in with both locks.
C. ut new belt on center of brush
roll.
D. Set brush roll back in place in
vacuum and align belt with the
belt guide.

8
How To Empty Cloth Bag
NOTE: Turn off the switch and unplug the electrical cord before servicing the
bag. Never operate the vacuum cleaner without the dust bag.
A. Unlock sprin from top clip
B. Unlatch ba from vacuum
C. Remove slide and sprin from top
of cloth ba
D. Empty contents into the appropriate
container
E. Put slide and sprin back on the
top of cloth ba
F. Reinstall cloth ba back on vacuum
icking up fine powders, substrates or carpet fresh powders can clog the cloth
bag - lease remember to empty bag often so that vacuum cleaner can operate
more efficiently.

THE GLOBAL INDUSTRIAL
LIMITED WARRANTY
WHAT THIS WARRANTY COVERS
Your GLOBAL INDUSTRIAL cleaner is warranted to be free from
all defects in material and workmanship in normal use FOR A
ERIOD OF ONE YEAR. The warranty is granted only to the
original purchaser of the cleaner. The warranty is subject to the
following provisions.
WHAT THIS WARRANTY DOES NOT COVER
• arts of the cleaner that require replacement under normal use,
such as bumpers, bags, bristle strips, belts and impellers.
• Damages or malfunctions caused by negligence, abuse or use
not in accordance with the Owner’s Guide.
• Defects or damages caused by unauthorized service or the use of
other than GLOBAL INDUSTRIAL parts.
GLOBAL INDUSTRIAL will, at its option, repair or replace a
defective cleaner or cleaner part that is covered by this warranty.
As a matter of warranty policy, GLOBAL INDUSTRIAL will not
refund the consumer’s purchase price.
GLOBAL INDUSTRIAL does not recognize internet sales, the warranty
is null and void if the unit is purchased on a non-authorized site.
The warranty is null and void if the user does not use original
GLOBAL INDUSTRIAL original paper bags as well as any parts.
9