2 D6040 - SIL 3 Digital Output Driver G.M. International ISM0411-0
General Description:
The single or dual channel Loop Powered Digital Output Isolators, D6040S and D6040D, are suitable for driving solenoid valves, visual or audible alarms to alert a plant operator,
or other process control devices from driving signals. They can also be used as controllable supplies to power measuring or process control equipment.
Their use is allowed in applications requiring up to SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. The Safety PLC or DCS driving
signals control the field devices through D6040S and D6040D, which provide isolation. For each channel two basic output circuits are selectable, with different parameters, to interface
the majority of devices on the market. The selection among the two output characteristics is obtained by connecting the field device to a different couple of terminal blocks.
Mounting on standard DIN-Rail or on customized Termination Boards.
Functional Safety Management certification:
G.M. International is certified by TÜV to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3.
Technical Data
Characteristics
Loop Input:
loop powered control signal.
Loop Supply: 24 Vdc nom (18 to 30 Vdc) reverse polarity protected,
2 A time lag fuse internally protected.
Current consumption @ 24 V: 45 mA with 30 mA output for each channel of D6040D, typical in normal operation. 55 mA with 40 mA output (typical for D6040S).
Power dissipation: 0.75 W with 24 V supply, output energized at 35 mA nominal load for each channel of D6040D;
0.85 W with 24 V supply, output energized at 45 mA nominal load for D6040S.
Isolation (Test Voltage):
Out/In 1.5 KV; Out/Out 500 V; In/In 500 V.
Output:
See next page for detailed output diagrams and characteristics.
Short circuit current:
≥45 mA (50 mA typical) for single output configuration (D6040S);
≥35 mA (40 mA typical) for single output configurations (D6040D);
≥70 mA (80 mA typical) for parallel output configurations (D6040D).
Response time: ≤75 ms.
Frequency response: 50 Hz
Compatibility:
CE mark compliant, conforms to Directive: 2014/30/EU EMC, 2014/35/EU LVD, 2011/65/EU RoHS.
Environmental conditions:
Operating: temperature limits – 40 to + 70 °C, relative humidity 95 %, up to 55 °C.
Storage: temperature limits – 45 to + 80 °C.
Approvals:
TÜV Certificate No. C-IS-722134640-01, SIL 3 conforms to IEC61508:2010 Ed.2.
TÜV Certificate No. C-IS-236198-09, SIL 3 Functional Safety Certificate conforms to IEC61508:2010 Ed.2, for Management of Functional Safety.
Mounting:
T35 DIN-Rail according to EN50022, or on customized Termination Board.
Weight: about 110 g.
Connection: by polarized plug-in disconnect screw terminal blocks to accomodate
terminations up to 2.5 mm2.
Protection class: IP 20.
Dimensions: Width 12.5 mm, Depth 123 mm, Height 120 mm.
FSM
SIL 3
