Go AirTies Smart Wi-Fi User manual

Home Wi-Fi
in every corner.
Guaranteed.
Set-up Guide
go.com.mt
Smart Wi-Fi

What’s included
in the box
Power supply
Ethernet cable
Installation guide
Smart Wi-Fi pods

LED
Indicator State LED Colour
LED
Behaviour
Power
button
Power off Off
Power on White Solid
Device not ready White Blinking
5 GHz
WLAN is active and the Access Point has an
active strong MESH connection on the Access
Point
Green Blinking
WLAN is active and all MESH links on the
Access Point are weak
Red Solid
Access Point is inactive Off
WPS is in progress Green Blinking
WPS is successful Green Solid
Unconfigured device Green Blinking
2.4 GHz
WLAN active, device configured, no MESH link
on the Access Point
Green Solid
There is a configured MESH connection on the
Access Point, however connection is inactive
(Can’t connect)
Red Blinking
WPS Is unsuccessful Red Solid
LED Indicator status list
3

GO Smart Wi-Fi
Setting up your mesh network

STEP 1
Plug the pod into a power outlet.
STEP 3
Connect the pod to your GO router/
modem using the supplied Ethernet
cable.
STEP 2
Switch off the Wi-Fi of your GO
modem/router.
STEP 4
Wait for the pod to go through the
setup process - this can take up to 3
minutes. The indicator lights on the
pod will turn green as soon as it is
paired to your GO modem/router.
OFF
5

STEP 6
Download the AirTies WiFi app
from the App Store/Play Store to
maximise your experience and
set up additional pods.
AirTies WiFi
STEP 5
Setup the second GO Smart Wi-Fi
pod in another area of your home by
plugging it in to a power outlet. The
indicator lights on the pod will turn
green as soon as it is paired to your GO
modem/router.
6

GO Smart Wi-Fi
Adding additional pods
using the Airties Wi-Fi app
OPTION 1
Airties Wi-Fi app

This setup process requires you to download
the AirTies WiFi app on your mobile phone/
tablet.
STEP 1
Connect your mobile phone/tablet to
your Wi-Fi Mesh network.
STEP 2
Plug the additional pod into a power
outlet.
STEP 3
Open the AirTies WiFi app on your
mobile phone/tablet.
8

STEP 4
Select ‘My Network’ from the app menu.
STEP 5
Click on +AirTies unit.
STEP 6
Follow the instructions on the app to
successfully set up your pod.
9

GO Smart Wi-Fi
Adding additional pods
manually
OPTION 2
Manual

STEP 1
Plug the additional pod into a power
outlet.
STEP 2
Press the WPS button on the front of
the pod connected to the modem for
1-5 seconds. Press the WPS button on
the front of the additional pod for 1-5
seconds.
STEP 3
Wait for the pod to go through the
setup process - this can take up to 3
minutes.
The indicator lights on the pod will
turn green as soon as it is paired to
your GO modem/router.
11