gobandit Ant+ User manual

ENGLISH
How to use ANT+ devices
with your gobandit LIVE camera
ANT+®
USER MANUAL

2
Important product and safety informaon
For your own safety read the Important product and safety informaons
of the gobandit products and/or accessories before you use them. You
can nd the Important product and safety informaons of the gobandit
products on the web page www.gobandit.com/support. There you can also
nd the latest version of this document.
Important informaon on safety and handling
CAUTION: Non-observance of these notes on safety can lead to injuries of
persons, res, electric shocks or other ensuing damages, or to damage of
the gobandit products or other components.
gobandit is a registered trademark of gobandit GmbH. Microso, Windows and the Windows logo are
trademarks or registered trademarks of Microso Cooperaon. Mac and the Mac logo are trademarks or
registered trademarks of Apple Computer Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. ANT is a trademark
of Garmin Ltd., Dynastream Innovaons, Inc. or its companies’. HDMI is a registered trademark of HDMI
Licensing, LLC. All other trademarks or registered trademarks are the property of their respecve owners.
Technical specicaons, features, designs and colors are subject to change without noce.

3
Choose your ANT+ device:
The gobandit LIVE camera supports gobandit cered ANT+® accessories,
like a Remote Control or Heart Rate Belt.
Note: For a list of supported heart rate belts please visit
www.gobandit.com/antplus
Power on your ANT+ device:
· Read the user manual of your ANT+ device, how to power on the device
· Some ANT+ devices, like the Remote Control or Heart Rate Belt have no
dedicated switch to power on the deice. In most cases, to power on
devices having buons, like the Remote Control, press any buon – to
power on devices like a Heart Rate Belt, simply wear it on your chest
using the delivered belt (if necessary, moisturize your chest).
To pair your ANT+ device with your gobandit LIVE camera:
Note: ANT+ is only supported by gobandit LIVE camera. Make sure,
that only ANT+ device are in the near range of your camera, that you want
to pair with your camera.
· Power on your gobandit LIVE camera
· Push the buon shortly to toggle through the available display modes
unl display shows: SET
· Press the buon shortly to enter sengs mode – the rst sengs
funcon is blinking in the display: VID
· Push the buon quickly to toggle through the available sengs unl
you see ANT+ blinking in the display
· Press the buon shortly to select ANT+ funcons.

4
· You will see the funcon “NEW ANT+” as the rst ANT+ funcon to pair
ANT+ devices:
· Press the buon shortly to select this funcons. The display shows
“ON ANT+” and the camera starts to scan for ANT+ devices - the
“Link” icon is blinking while the camera is searching.
· If a device is found, the display shows “OK ANT+”. Further the “Link”
icon is displayed solid.
· If your device is a Heart Rate Belt, the Heart Rate display is showing
the measured bpm (beats per minute):
· If no device is found within search period (appriox. 30 seconds), the
display shows “NO ANT+”. Press the buon shortly twice to search
again.
Using your ANT+ device with your gobandit LIVE camera:
· Aer you have paired your ANT+ device(s) once, the gobandit LIVE
camera stores the device(s) in its memory – even aer you have switched
o your gobandit camera.
· The gobandit LIVE camera regulary searches for paired ANT+ devices.
You will see the “Link” icon displayed solid, as soon as a formerly
paired ANT+ device is found and linked.
· If your paired and linked a Heart Rate Belt, the Heart Rate display is
showing the measured bpm (beats per minute). Simpy push the
Mode buon ( ) shortly to toggle trough the available display modes.

5
To unpair / remove your ANT+ device from your camera:
Note: The funcon to unpair / remove ANT+ devices from your camera
removes all once paired ANT+ devices from your gobandit camera. There
is no funcon to unpair/remove selected ANT+ devices from your gobandit
camera.
· Select the sengs menu SET – toggle to ANT+
· Press the buon shortly
· Push the buon quickly to toggle to “CLR ANT+”
· Press the buon shortly to unpair/remove all ANT+ devices from your
camera. The acon is conrmed by showing “RST ANT+” in the display.
To deacvate ANT+ on your camera:
Note: If you have once paired a ANT+ device with your camera, it
regulary searches for paired ANT+ devices and is therefore acvang the
ANT+ radio transmier.
The ANT+ radio transmier can be deacvated by unpairing / removing all
ANT+ devices from your camera – see above.
Making use of a Heart Rate Belt:
If your paired and linked a Heart Rate Belt,
· the Heart Rate display is showing the measured bpm (beats per minute).
Simpy push the Mode buon ( ) shortly to toggle trough the available
display modes.
· the Heart Rate data is added to the performace data to your video.
You can display the Heart Rate value in your video by making use of
gobandit STUDIO, a free Windows PC / Mac soware applicaon or by
gobandit MOBILE, a free mobile app (both downloadable under
www.gobandit.com/start)

6
gobandit GmbH
Max-Planck-Str. 4
85609 Aschheim/Dornach
Germany
www.gobandit.com
© 2012 gobandit GmbH. All rights reserved. Technical specicaons, features, designs
and colors are subject to change without noce. gobandit is a trademark of gobandit
GmbH. All other trademarks and registraons are the property of their respecve
owners. Internet connecon required. Patent Pending.
Version 1.0
GBX0030
www.gobandit.com/support