Godrej SeeThru User manual

User Manual
Godrej & Boyce Mfg. Co. Ltd.
Godrej Security Solutions
Regd. Office: Plant No.17, Pirojshanagar, Vikhroli, Mumbai - 400 079
Tel.: [phone] | Fax: [phone]
Toll-free: 1800 209 9955 | SMS <GSS> to 53636
Email:[e-mail] | Visit: www.godrejsecure.com
In view of the Godrej Policy of continuous development and improvement, the
dimensions as seen on the catalogue of the product may not match with the actual
product. The colour combinations of the products as seen on this catalogue may
vary and not match with the actual colour of the product due to printing limitations.
An ISO 9001:2008 & ISO 14001:2004. BS OHSAS 18001:2007
Products Marketed and Serviced By Godrej & Boyce Mfg. Co. Ltd.
7'' TOUCH SCREEN
VIDEO DOOR PHONE

Table of Contents
1. Name and Functions of Each Part. . . . . . . . . . . . . . . . . . . . . . . . 2
1.1 Front Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Rear Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Features and Functions ................................5
2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Main Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Packing Contents ....................................6
4. Connection Diagram ..................................7
4.1 System Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2 Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. Installation .........................................13
5.1 Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.2 Wire & Monitor Installation. . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Operation Description ................................15
6.1 Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.2 Visitor Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.3 Monitor Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.4 Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.4.1. Image & Video Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.4.2. Image & Video Review . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.4.3. Voicemail Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.4.4. Photo Frame Function . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.5 Intercom Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6.6 Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
6.6.1. Call Forwarding Function . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.6.2. Control the Door Station by Telephone . . . . . . . . . . . . . . . 29
6.7 Setting page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

WARNING AND CAUTION
Do not disassemble, install, or repair this product on your own accord
Do not use water, thinner or a detergent used to wash oil products
when you wash the exterior
Make sure to clean it by using a dry cloth to prevent any breakdown or
electric shock
If the product emits a peculiar noise, odour or smoke, immediately cut off
the power, and then contact the service center
Make sure to prevent foreign substances from entering the product
Avoid direct rays of the sun or heating devices at a time of installation
Do not unplug the TF card when recording, this generally will cause
loss of data
Please make sure to follow the instructions to prevent any danger or
property losses
Do not place the product near a hot or humid place
Do not forcibly bend the cord or put a heavy object on the product
Do not connect to other products while in use
Do not put the plug in the socket with a wet hand
Make sure that dust or foreign substances are not gathered on the product
Install the product in a flat and stable place
Pull the plug if the product is not used for a long time
1. Name and Functions of Each Part
1.1 Front Part
Warning: Death or serious injuries are expected
Caution: An injury or property losses are expected
1 2

1. Name and Functions of Each Part 1. Name and Functions of Each Part
1.2 Rear Part
NO. Part Name Description
1 Power Indicator
2 Review Button Touch button for reviewing picture or video
3 Intercom Button Touch button for intercom
4 Monitor Button Touch button for monitoring
5 Talk Button Touch button for talking with visitor
6 Door Release Button Touch button for releasing door
7 Touch Screen 7 inch touch screen
8 MIC Microphone
9 Power Cable AC power cable
10 Power Switch
11 TF Card Slot Socket for TF card
NO. Part Name Description
12 Speaker Loud speaker
13 75Ω Switcher Impedance matching for video signal
14 Video Input/Output CCTV1/CCTV2/CCTV3/CCTV4/
video out (2 wire in polarity)
15 DC Power 14.5V DC supply
16 Telephone Interface for the telephone line
17 Connection Interface Interface for door station 1/door station 2/
extensions/audio phone
3 4

3. Packing Contents
2. Features and Functions
2.1 Features
•
• Support 2 door stations, 4 CCTV cameras, 1 master monitor + 3
extension monitors, 1 audio phone and 1 CCTV output
• Built-in flash memory:100 pictures
• Support telephone function and call forwarding
• TF card: 1024 images and 128 videos
• 16 melodies for different door stations
• Support motion detection
• Leaving voice messages for family & visitors
• Point-to-point intercom and broadcast
• Support digital photo frame
2.2 Main Functions
• Monitoring and talking with a visitor
• Door lock release
• Support AC/DC power input
• Support multi-language
• Do-not-disturb function
• Date and time display
• Surface mount
7” TFT-touch screen, 800×480 Resolution
Main Body Wall Bracket User Manual
CCTV Wire
2*5 pin cable for 4* CCTV IN
and 1*CCTV OUT
Wall Bracket
Mounting Screw
Plastic
Expansion Pipe
2 pin cable for
telephone
2 pin DC input cable
5 6

4. Connection Diagram
There are two CCTV connection modes.
• CCTV connection mode 1
Each monitor can connect to different CCTV, and can only monitor the
directly connected CCTV (Extensions ≤ 3).
4.1 System Layout •CCTV connection mode 2
Only master monitor can connect to CCTV, extensions get CCTV video
from the master. The extensions monitor CCTV by sending requests to the
master. Only one monitor can monitor CCTV at a time.
7 8
4. Connection Diagram

4. Connection Diagram
Please be careful to wiring on polarity.
• Intercom wiring diagram with one monitor
4.2 Wiring Diagram
• Intercom wiring diagram with master monitor and extensions
(pay attention to the impedance matching switch)
9 10

4. Connection Diagram
• CCTV connection mode 1
Each monitor can connect to different CCTV, can and can only monitor the
connected CCTV.
• CCTV connection mode 2
Only the master can connect to CCTV, extensions get CCTV video from
the master. The extensions monitor CCTV by sending requests to the
master. Only one monitor can monitor CCTV at a time (pay attention to the
impedance matching switch).
11 12

5. Installation
Monitor installation location
Standard monitor installation height is about 1,500mm where screen
centre is at eye level; in this case, wall-hanging metal centre is 1,450mm
above ground level.
5.1 Installation Location 5.2 Wire & Monitor Installation
1) Push down the button
with screwdriver
2) Put the wire into the
hole from the bottom
3) Release the screwdriver
4) Check the fastness of
the wire
5) Remove wall-hanger
bracket behind monitor
6) Install wall-hanger
bracket
7) Connect wires to back
terminal of monitor,
referring to connection
diagram
8) Hang monitor on wall-
hanging, and fix monitor
on wall-hanger bracket
9) Plug monitor’s power
plug into power socket
13 14
5. Installation

6. Operation Description 6. Operation Description
6.1 Main Screen
It will show corresponding functions when pressing each icon on main
screen.
Icon Definition:
Home/Leaving/Do Not Disturb
enter [Camera] enter [CCTV] page
enter [Video] page enter [Image] page
enter [Voicemail] page enter [Photo Frame] page
enter [Intercom] page enter [Telephone] page
enter [Setting] page turn off screen
In [Leaving] mode, when door station calls in, the monitor will play the
voicemail to visitor, if the voice message is recorded and been set in the
[Setting] page. In [Do not Disturb] mode, when door station calls in, the
monitor will be mute.
Remark: To set the voicemail, please see 6.7
15 16

Home Talk Setting Open Exit
TransferRecordChange
6. Operation Description 6. Operation Description
6.2 Visitor Call
When door station calls in, the visitor’s image will be shown on the monitor
screen (on-screen duration 90 seconds).
Icon Definition:
back to [Main Screen] talk
switch between door
stations and CCTVs record video
adjust display parameters call transfer manually
open the door turn off screen
When a door station calls in, press [Talk] to start to talk; press [Talk]
again to terminate the talk.
During the talk:
• press [Change] to switch to other door station or CCTV, and the current
talk will be terminated
• press [Record] to record a video clip or capture a picture from the
calling door station, depending on the system setting (see 6.7)
• press [Setting] to adjust the sound volume, brightness, colour and
contrast
Home Talk Setting Open Exit
TransferRecordChange
CAM1 2013-05-16 14:43:12 TF
TF
CAM1 2013-05-16 15:07:19
Master Ext. 1 Ext. 2 Ext. 3
17 18

6. Operation Description 6. Operation Description
•
• press [Open] to release door.
• press [Exit] or [Home] to end the talk.
press [Transfer] to transfer the current call to other extension monitors.
6.3 Monitor Function
When you press the [Camera1] / [Camera2] or [CCTV1] / [CCTV2] /
[CCTV3] / [CCTV4] icon on main screen, the system will enter monitor
mode, and will show image from the corresponding door station / CCTV.
Remark: The [Transfer] buttons will be in disable status under monitor
mode.
If you insert TF card, monitor can record image and video, if you do not
insert TF card, monitor can only record image. Maximum Capacity: TF
card: 1024 images and 128 videos Built-in flash memory: 100 images
When full, the newest image/video will automatically overwrite the oldest
image/video.
6.4 Multimedia
6.4.1. Image & Video Storage
Home Change Setting Open ExitTalk Record Transfer
CAM1 2013-05-16 14:43:12
Volume
Brightness
Color
Contrast
TF
19 20

6. Operation Description 6. Operation Description
Icon Definition:
6.4.2. Image & Video Review
Press [Image] or [Video] on main screen, you can review the image/video.
There are 6 images/videos in one page. The image/video with white
borderlines means that the image is selected.
return to [Main Screen] switch between TF card and
flash memory
show previous page zoom in/out image and video
show next page delete the selected image/video
You can press the icon or on the top left corner to switch
[Image] / [Video] review mode.
6.4.3. Voicemail Function
•Audio Message Record
Press [Voicemail] on main screen to record an audio message.
Home Prev Zoom Next Delete
Change
IMAGE: 0006/0194
2013-05-16 14:43:12
For Guest For Family
Home Prev Play Next Delete
CCTV 1 IMAGE: 0001/1006
2013-05-23 16:53:12
TF Card Flash
21 22

6. Operation Description 6. Operation Description
Icon Definition: Icon Definition:
Press [For Guest] / [For Family], enter the recording page to record voice
message. Monitor support up to 30s for each message.
• Review Audio Record
Press to review records.
return to [Main Screen] play previous clip
play
delete
/ : Switch between family message list and guest
message list.
Remarks:
• Up to 32 messages for family and 2 messages for guest. When full, the
newest message will automatically overwrite the oldest message
• This function can be supported with TF card only
return to [Main Screen] List: view audio
message
leave a voice message
for family
leave a voice
message for guest
For Family For Guest
For Guest For Family
2013-05-16 14:43:12
For Family MAG: 006/094
play next clip
Return Prev Next DeletePlay
23 24

6. Operation Description 6. Operation Description
6.4.4. Photo Frame Function
Press [Photo Frame] on main screen, monitor will play the image one by
one automatically.
Icon Definition:
Remark: Only photos with specific format can be shown in the photo
frame. To convert the photo, please see Appendix I.
return to [Main Screen] show previous image
display image show next image
delete
6.5 Intercom Function
Press the [Intercom] icon on main screen, choose the monitor you want to
call, and then press [Call], and then you can talk with the corresponding
monitor.
Icon Definition:
[Inner Call] call the audio phone
[Ext. 1] call extension monitor 1
[Ext. 2] call extension monitor 2
[Ext. 3] call extension monitor 3
[Master] call master monitor
[Broadcast] call all monitors
: In the [Intercom] page, you can enable/disable [Mute]
function, and adjust the volume. To set intercom address: please see
[Setting] → [Intercom].
Home Prev Play Next Delete
25 26

6. Operation Description 6. Operation Description
6.6 Telephone
The Monitor can support telephone function:
• Make and receive a telephone call
• Transfer the call from door station to a specific mobile phone or fixed
phone and control the door station via telephone
Icon Definition:
enable/disable [Mute] function
adjust volume
enable/disable call forwarding function
[Call Forwarding] function is enable
reset phone
redial
6.6.1. Call Forwarding Function
To use call forwarding function, you need to set a forwarding telephone
number, please take the following steps:
1. Press [Telephone] icon on main screen, enter [Telephone] page
2. Set a telephone number you want to forward:
*1* → Phone Number # OK Remark: The tel. number should be
within 20 numbers.
3. Check the telephone number:
*2* → # →OK
→ →
27 28

6. Operation Description 6. Operation Description
4. Set ring time before call forwarding,
*5* → Ring Time → # → OK
Remark: The ring time range = [1s ~ 30s], and you must input 2 figures.
For example:
1. Set "123" as
forwarding phone
number
2. Check the
phone No. you set
3. Set the waiting
time: "06s"
6.6.2. Control the Door Station by Telephone
When no one answers the call from door station, the call will be transferred
to your telephone. During the talk, input 2 + '#' to open the door.
6.7 Setting page
Press [Setting] icon to set up the system.
Icon Definition:
return to [Main Screen] enter [Camera] setting page
enter [Monitor Record]
setting page
enter [Photo Frame]
setting page
enter [Voicemail] setting page enter [Intercom] setting page
enter [General] setting page enter [Melody] setting page
restore factory setting
1
29 30

6. Operation Description 6. Operation Description
[Camera] setting page
In this page, you can turn [Motion Detect] on or off, set one camera as
default for monitoring, set default camera for motion detection, set
detection start & end time and set door open timeout.
• To set a default camera for motion detection, enter into option list:
CAM1/CAM2/CCTV1/CCTV2/CCTV3/CCTV4 Choose one option →
Press [Return] button
• To set time range for motion detection, you can set the start time and
the end time
• To set door open timeout, enter into option list: 1 s/2 s/3 s/Open While
Pressing Choose one option → Press [Return] button
Remark: Once a moving object is detected, camera will automatically
capture a video of 15s. When monitoring door station or CCTV, motion
detection will pause until the monitoring ends.
[Monitor Record] setting page
In this page, you can
• Turn [Auto Record] on or off. If [Auto Record] is on, the monitor will
capture pictures or videos automatically, when door station calls in.
• Select picture or video record mode. To set video recording timeout,
enter into drop-down option list: 15 s/30 s/60 s.
• Copy/delete pictures and videos
• Format TF card and flash memory
31 32

6. Operation Description 6. Operation Description
[Voicemail] setting page [Intercom] setting page
In this page, you can select one voicemail for guest as the message to play
under [Leaving] mode.
Remark: The Voicemail message is stored on the TF card. This
configuration will be invalid if there is no valid TF card inserted. To record
message for guest, please see 6.4.3.
In this page, you can
• Turn [Intercom Receive Enable] on or off
• Set up intercom address. Main monitor should be set up as "Master",
extension monitors should be set up as "Ext.1","Ext.2","Ext.3"
successively.
33 34

6. Operation Description 6. Operation Description
[General] setting page [Melody] setting page
In this page, you can set up date & time; select a language and CCTV
mode. Default option - CCTV mode 1.
Remark: The CCTV mode of every monitor should be the same. With the
CCTV mode of master monitor changing, the extensions' CCTV mode will
change automatically. Note that you should set the master and extension
properly.
In this page you can:
• Turn [Touch Tone] on or off
• Select ring melody for door station 1, door station 2 and intercom.16
melodies for you to choose
• Set ring timeout:10 s/20 s/30 s
In [Factory Reset] setting page you can restore system to factory settings
(except date & time, intercom address)
35 36