Gofreetech GFT-M010 User manual

User manual
GFT-M010 Wireless Optical Mouse
Products features
1. World general 2.4G wireless solution transfer distance up to 10 meters.
2. Adopt Chipset 3065-XY(D) low power consumption
3. 800-1200-1600 3 CPI available for adjustment
4. infrared tracking .
5. Build-in Super nano receiver plug and play.
6. Multistage power option
Products installment
1. Get wireless mouse and receiver from package
2. connect the nano receiver with computer USB port
3. Put a AA alkaline battery properly in mouse and put mouse close to receiver
within 50cm.
4. LED light flickers for serval seconds, then you can use.
Advanced function
1.CPI adjustable function
Fixed solution:1200CPI,adjustable among 800-1200-1600 CPI.Press the CPI button
on the top of mouse to experience different speed,when it on 800 DPI the light will be
flash 1 time,1200 DPI the light will be flash 2 times and 3 times on 1600 DPI
2.Auto sleep function
In order to saving more power, it will come into the status of sleep automatically
without mouse using for 8 minutes or the computer shut down. Press any keys for
continuing use.
Notice: long time no use, please take out the battery, for fear of parts corrosion
3. Build in receiver
Using super Nano receiver, can be connected with PC & Notebook for a long time, no
any effects for computer. Plug the receiver back into mouse for easy taking and for
fear of missing.
Reconnection
There are different sets of built-in identification number for wireless mouse data
transmitting and receiving, Easy to use the mouses when using them one-on-one.
High temperature, high magnetic field, vibration may block this identification code,
then need reconnect it and use. Methods as following,

·Pull out and reconnect receiver.
·put the mouse near to receiver within 50cm and install the battery, press any key or
move the mouse.
·The bottom light on shows mouse connected and can be use.
Announcement
Adopt optical as mouse motion detect, in compliance with related safety regulation
Adopt 2.4GHZ radio wave for data transmitting, use distance 5-7 meters if big block
Warning
Without the approval of the authorities to make any change or amendment,we have
the right to prohibit user operating this equipment
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.