
Grindo Pro & Grindo
DO’S
• Always operate your grinder as per the instructions given in the manual.
• Place your grinder at a convenient height on even surface.
• Keep your grinder from heat and direct sunlight.
• Keep your grinder clean and dry.
• Always operate your grinder at the specied voltage.
• Ensure adequate water in the medium for smooth and quick grinding.
• Handle carefully while xing, removing and cleaning attachments.
• Always lift the grinder holding the base.
• Remember to keep the switch in ‘OFF’ position after use.
• Ensure disconnection from electrical mains after use.
• Close supervision is necessary when your wet grinder is used with children
nearby.
• After use, clean the accessories and keep them ready for future use.
• Any dicult in starting or in the operation of the grinder, contact our authorized
dealer or manufacturer for assistance and resolving.
DON’TS
• Do not run the grinder empty.
• Do not operate your grinder without xing the transparent lid properly.
• Do not burden motor with load heavier than specied.
• Do not x or remove attachments while the motor is ‘ON’.
• Do not use any other attachments expect those provided by the manufacturer.
• Do not put your hand inside the drum while grinder is in operation.
• Do not open the lock while your grinder is in operation.
• Never lay any thin plastic sheet or cloth under the basic unit. This may block
the ventilation holes.
• To protect against any electrical hazards, do not immerse plug or cord in water
or in any liquid.
• Do not let the cord come in contact with any hot object.
• Do not store any items inside the drum.
• Do not allow the children to handle your grinder.
• Do not pour water over your grinder.
• Do not attempt to repair the grinder yourself.