Goldmund Metis 5 User manual

USER MANUAL
GOLDMUND Metis 5
Analog Integrated Amplifier

Thank you for purchasing the Goldmund METIS 5 Analog Integrated Amplifier. The Goldmund
Metis line amplifiers fully incorporate the technological expertise developed by our company
throughout many years. Please take some time to read this manual. It will provide you with useful
information to make your pleasure of listening to the Metis 5 even higher.
INTRODUCTION
GOLDMUND METIS 5 Analog Integrated Amplifier
Goldmund was founded in 1978 and has ever since been dedicated to the accurate reproduction of
sound and image.
At Goldmund, we strive to lead in the creation, development and manufacture of the industry’s
most advanced technologies, including audio and video systems.
The guiding principle at Goldmund is to produce a precise sound with the least possible loss of
quality through the different stages. Goldmund will never adopt a technology before it is sufficiently
developed to satisfy the high quality standards we set. This is why Goldmund has often rejected
mainstream technologies and developed its own.

GOLDMUND METIS 5 - Integrated Amplifier - 3
Table of Contents
UNPACKING 5
2 AMPLIFIER LOCATION & COOLIN 5
3 CONNECTIONS & LINE VOLTAGE 6
4 AMPLIFIER CONTROLS 7
5 SOUND QUALITY OPTIMIZATION 8
6 MAINTENANCE AND CLEANING 8
7 TECHNICAL SPECIFICATIONS 9
8 BACK PANEL PICTURE 2

GOLDMUND METIS 5 - Integrated Amplifier - 4
W A R N I N G !
This high quality amplifier possesses new
technical features such as ultra-high band
width and computer linking which are
necessary for accurate transcription within
today’s best audio systems.
Only careful use can provide all the
satisfaction you are expecting.
All handling must be performed according to
the following instructions to avoid impairing the
amplifier’s performance.
Nevertheless, if the instructions are perfectly
carried out, you will notice that the use of the
GOLDMUND METIS 5 is quite simple and
convenient.
IMPORTANT
PLEASE DO NOT CONNECT ANY CABLES
OR MOVE ANY PARTS BEFORE READING
THE FOLLOWING INSTRUCTIONS.

GOLDMUND METIS 5 - Integrated Amplifier - 5
UNPACKING
UNPACKINGUNPACKING
UNPACKING
You will find within the custom
packaging:
- The Metis 5 amplifier,
- The remote control & batteries (to be fitted before use),
- The power cord,
- This owner's manual.
Unpack the above-mentioned parts carefully.
Keep all packaging for future use.
WARNING
If you need to return the Metis 5 to the factory or to your local representative for a warranty
repair, please note that it must be repacked in the original packaging.
This packaging has been designed specifically to protect your Metis 5 in transit. Use of
alternative packaging is likely to result in damage, invalidating warranty cover.
2
22
2 AMPLIFIER LOCATION & C
AMPLIFIER LOCATION & CAMPLIFIER LOCATION & C
AMPLIFIER LOCATION & COOLING
OOLINGOOLING
OOLING
The Metis 5 amplifier, like all high quality amplifiers, generates a lot of heat when driven at
high levels and therefore must be vented properly.
It is mandatory to allow proper cooling of the heat sinks.
Do not put temperature sensitive equipment on top of the amplifier.

GOLDMUND METIS 5 - Integrated Amplifier - 6
3
33
3 CONNECTIONS & LINE VOLTAGE
CONNECTIONS & LINE VOLTAGECONNECTIONS & LINE VOLTAGE
CONNECTIONS & LINE VOLTAGE
Connect the power cord to the back of the amplifier and plug it into the nearest wall plug.
For safety reasons, use only a 3 lugs grounded plug.
To get the best sound from the amplifier, avoid any multi-way plugs or extension cords.
• Connect the speaker cables to the binding posts on the rear panel.
• Connect the interconnects from any analog sources to line inputs 1 to 5.
AT T E N T I O N
A residual high frequency noise may remain audible in some circumstances if an input is
left open and is selected. This disturbance has no effect on the amplifier but may be
avoided easily through the application of short-circuit plugs on all unused inputs.
L
LL
LI
II
IN
NN
NE
EE
E VO
VOVO
VOL
LL
LT
TT
TAGE
AGEAGE
AGE
The Goldmund Metis 5 integrated amplifier is preset at the factory for your country's
voltage. It functions with AC voltages between either, 200V and 245V, or, 95V and 125V.
If your AC line is usually out of these tolerances, please consult your local Goldmund
dealer.
Please check the value of the mains line fuse. This fuse is located in the power cord
receptacle. The lid can be removed with a small screwdriver when the cord is removed.
Use a 5A slow-blow fuse.

GOLDMUND METIS 5 - Integrated Amplifier - 7
4
44
4 AMPLIFIER CON
AMPLIFIER CONAMPLIFIER CON
AMPLIFIER CONTROLS
TROLSTROLS
TROLS
P
PP
PO
OO
OWER
WERWER
WER
The METIS 5 integrated amplifier is powered on using the switch located on the back
panel. In regular use this switch should be left ON at all times (see sound quality
optimization). The standby function of the remote control should be used to mute the signal
for safe removal of cables. When in standby mode the front panel operation LED will stay
lit.
The amplifier is powered OFF by switching the back panel switch to the OFF position. A
safety circuit switches the unit to mute to avoid any disturbance reaching the speakers.
MU
MUMU
MUT
TT
TI
II
IN
NN
NG
GG
G
To mute the preamplifier output, press the "MUTE" key. The same operation repeated
brings back the amplifier to normal operation at the same volume as in operation at the
point the mute function was activated.
VOLU
VOLUVOLU
VOLUM
MM
ME
EE
E ADJUST
ADJUSTADJUST
ADJUSTM
MM
MENT
ENTENT
ENT
The level control may be adjusted manually using the front panel knob or by using the +
and - buttons on the remote control.
S
SS
SE
EE
ELEC
LECLEC
LECT
TT
TOR
OROR
OR
The selector now selects one of five available inputs. Each step clockwise selects the next
input in sequence. Selection may also be made using the remote control by pressing the
key corresponding to the input on the remote control.

GOLDMUND METIS 5 - Integrated Amplifier - 8
5
55
5 SOUND QUALITY OPTIMIZATION
SOUND QUALITY OPTIMIZATIONSOUND QUALITY OPTIMIZATION
SOUND QUALITY OPTIMIZATION
W
WW
WA
AA
AR
RR
RM
MM
M U
UU
UP
PP
P SON
SONSON
SONI
II
IC
C C
C EFFECT
EFFECTEFFECT
EFFECT
If the amplifier has been powered off for some time, the optimum
sound quality is only reached after some time. It may take 15
minutes for the amplifier to reach optimum operating temperature, as
the circuits have to warm up to around +55 degrees Celsius
(=131degrees Fahrenheit).
6
66
6 MAINTENANCE AND CLEANING
MAINTENANCE AND CLEANINGMAINTENANCE AND CLEANING
MAINTENANCE AND CLEANING
The Metis 5 amplifier usually requires no maintenance. Please contact
your Goldmund approved dealer if any maintenance should be required.
Always turn the power OFF before
cleaning your amplifier.
To clean the external metal of the amplifier, always use a clean, soft,
damp cloth. Dampen it with water or a mild detergent solution. Avoid
abrasive or harsh cleansers (e.g. products containing sodium carbonate).
The identification plates are plated with precious metal. Simply clean
them with a soft cloth, without any chemical solution.

GOLDMUND METIS 5 - Integrated Amplifier - 9
7
77
7 TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
FRON
FRONFRON
FRONT
TT
T PANE
PANEPANE
PANEL
LL
L CONTRO
CONTROCONTRO
CONTROLS
LSLS
LS
•Volume Control
•Selector Input Switch
•IR Receiver for Remote
•Display of playback level
•Display of input selected
•Power led
BAC
BACBAC
BACK
KK
K P
PP
PA
AA
ANE
NENE
NEL
LL
L CONTROLS
CONTROLSCONTROLS
CONTROLS
•On/Off switch
•Power cord socket 3 lugs
• Inputs
• Outputs
I
II
INP
NPNP
NPU
UU
UT
TT
TS
SS
S
•5 pairs of RCA inputs (right and left)
•Input impedance: 50 kOhms
•Maximum input level (unbalanced): 3.6 V RMS
O
OO
OUT
UTUT
UTP
PP
PUT
UTUT
UTS
SS
S
•2 pairs of output Speaker connectors (right and left)
P
PP
PO
OO
OWE
WEWE
WER
RR
R SU
SUSU
SUPP
PPPP
PPLY
LYLY
LY
•3 toroidal transformers
•3 separated power supply
•Power cord socket (3 lugs)
•Mains fuse (5A slow-blow)
GR
GRGR
GRO
OO
OU
UU
UND
NDND
NDI
II
IN
NN
NG
GG
G
•Separated ground and earth signal
•Connection between earth and ground to cancel all ground loops
SAFET
SAFETSAFET
SAFETY
YY
Y FEATURES
FEATURESFEATURES
FEATURES
•Automatic switching to MUTING if the AC line drops or is interrupted

GOLDMUND METIS 5 - Integrated Amplifier - 10
7
77
7 TECHNICAL
TECHNICALTECHNICAL
TECHNICAL SP
SPSP
SPE
EE
ECIFICATIONS
CIFICATIONSCIFICATIONS
CIFICATIONS (Ctd.)
(Ctd.)(Ctd.)
(Ctd.)
P
PP
PO
OO
OWER
WERWER
WER
•Power RMS (Goldmund FPP Standard): 150W on 8 Ohms
•Peak Power/Maximum voltage: 225W on 8 Ohms
•Nominal line voltage: 110 or 230 V
•Input voltage range: +/- 10 %.
•Maximum mains consumption at 234V: 600 W
•Power consumption in standby: 27 W
C
CC
CI
II
IRCU
RCURCU
RCUIT
ITIT
IT SPEED
SPEEDSPEED
SPEED
•Rise time: < 800 ns.
FREQUENC
FREQUENCFREQUENC
FREQUENCY
YY
Y RESPONSE
RESPONSERESPONSE
RESPONSE
•These values for any level to maximum output level
•+/- 0.15 dB, 10 - 20 kHz
•+/- 0.6 dB, 10 – 100 kHz
•+/- 1.2 dB, 10 – 200 kHz
D
DD
DI
II
IS
SS
ST
TT
TOR
OROR
ORT
TT
TI
II
ION
ONON
ON
With 1 Vrms output level, 80 kHz measurement bandwidth, 600 ohms termination impedance
•THD unbalanced in to balanced out 0.01 % flat with frequency
•IMD unbalanced in to balanced out 0.01 %
NO
NONO
NOI
II
IS
SS
SE
EE
E
•Signal-to noise ratio on line input: > 80 dB (0.01 Hz - 10 Mhz)
•Weighted ASA A: > 90 dB
OPER
OPEROPER
OPERAT
ATAT
ATI
II
IN
NN
NG
GG
G TE
TETE
TEM
MM
MPER
PERPER
PERAT
ATAT
ATURE
UREURE
URE
•Room temperature: -30 to +40 degrees Celsius ( -22 to +104 degrees Fahrenheit)
• Internal temperature: +45 to +65 degrees Celsius ( +113 to +149 degrees Fahrenheit)

GOLDMUND METIS 5 - Integrated Amplifier - 11
7
77
7 TECHNICAL
TECHNICALTECHNICAL
TECHNICAL S
SS
SP
PP
PE
EE
ECIFICATIONS
CIFICATIONSCIFICATIONS
CIFICATIONS (Ctd.)
(Ctd.)(Ctd.)
(Ctd.)
S
SS
SI
II
IZ
ZZ
ZE
EE
E A
AA
AN
NN
ND
DD
D W
WW
WE
EE
EI
II
IG
GG
GHT
HTHT
HT
Amplifier:
•350 mm (13.77") W x 276.5 mm (10.88") D x 60 mm (2.36") H
Packing Box:
•440 mm (17.32") W x 370 mm (14.56") D x 120 mm (4.72") H
•Total weight: 9 Kg (19.84 lb)
•Total weight with the box: 10 Kg (22 lb)
W
WW
WA
AA
ARR
RRRR
RRA
AA
AN
NN
NT
TT
TY
YY
Y
•3 years, parts and labor.
Information and product specifications contained in this manual are subject to change without
prior notice. Updated versions of this manual will be posted on our website at
www.goldmund.com.
Please visit our support page at http://www.goldmund.com/support/register to register your
Goldmund product for warranty.

GOLDMUND METIS 5 - Integrated Amplifier - 12
8
88
8 BACK PANEL PICTURE
BACK PANEL PICTUREBACK PANEL PICTURE
BACK PANEL PICTURE