GoodAudio BWS T2 User manual
INSIDE THE BOX
ITEM QUANTITY
Bluetooth Earphone 2 PCS
Charging Case 1 PCS
Charging Cable 1 PCS
Silicone Ear Tips 6 PCS
PRODUCT DESCRIPTION
Ear Tips
Gold/Silver Loop
Multifunction Touchpad
Upper Lid
L/R Markings
Earphones LED Indicator
2
S
M
L
Multifunction Touchpad
PRODUCT DESCRIPTION (continue)
Earphone Charging Pins
Build-in Microphone
USB-C Charging Port
Charging Case LED Indicators
BLUETOOTH PAIRING AND GETTING STARTED
1. Fully charge the case and earbuds (charge for 4 hours, until all charging
case LED indicators have been lit up).
2. Take the earbuds out of the case. They will turn on automatically and
connect within 5 seconds.
3. Turn on the Bluetooth pairing function on your device.
4. Find and select "BWS T2".
5. Choose your best fitting ear tips.
6. Put on and adjust earphones for best fit to enjoy the best sound quality.
3
FUNCTION OPERATION STATUS
Turn on
Open upper lid Earphones inside of
the case
Tap and hold
touchpad for 2 sec
Earphones outside of
the case switched off
Play media Tap touchpad once Earphones turned on
Pause media
playback Tap touchpad once Media playing
Restart / previous
track
Double-tap (L)
touchpad
Media playing or
paused
Skip to next track Double-tap (R)
touchpad
Media playing or
paused
Increase volume Tap and hold (R)
touchpad
Phone call / media
playing
Decrease volume Tap and hold (L)
touchpad
Phone call / media
playing
Activate voice assist Triple-tap (L)
touchpad Earphones turned on
Activate / disactivate
low latency mode
Triple-tap (R)
touchpad Earphones turned on
Switch off
Tap and hold
touchpad for 5 sec Earphones turned on
Return earphones
into the case and
close the lid
Anytime
CONTROLS AND FUNCTIONS
4
FUNCTION OPERATION STATUS
Answer call Double-tap touchpad Incoming call
End call Double-tap touchpad Call in progress
Reject call Tap and hold touchpad Incoming call
Place current call on hold
and answer new incoming
call
Tap touchpad once Call in progress,
new incoming call
Switch between active call
and on hold call Double-tap touchpad One call active,
one call on hold
Reject new incoming call
and continue current call
Tap and hold touchpad
for 1 sec
Call in progress,
new incoming call
CONTROLS AND FUNCTIONS (continue)
5
CHARGING EARPHONES AND CASE
•Return earphones to the case and close the lid, the earphones will start
charging automatically.
•Plugin the charging cable into the USB-C charging port, the case will start
charging automatically.
SAFETY AND CARE
6
•When not in use, power the headset off and store in the included
protective carrying case.
•Battery performance will decrease when stored in extreme temperatures:
below -10°C/14°F or above 45°C/113°F including direct sunlight.
•There is no replaceable/reparable parts in the headset. Disassembling it
will void your warranty.
•These earphones are built to last as long as possible, but they are not
waterproof. Exposers to excess moisture might void the warranty.
•Do not use around flammable gasses as fire or explosion may occur.
•Keep the device and packaging out of reach of children.
CLEANING INSTRUCTIONS
1. Remove ear tips from earphones
2. Take a cotton swab damp with a small amount of rubbing alcohol or
soapy water. Swab the body of the earphones and ear tips. Note: Ear tips
can also be submerged fully in rubbing alcohol or hydrogen peroxide
3. Allow the earphones and ear tips to dry completely
4. Install ear tips on the earphones, make sure they are attached securely
WARNING
Using headphones at high to moderate volumes for extended periods will
result in permanent hearing damage. It is advised to keep the volume levels
at medium to low at all times. Do not use when driving a car, cycling,
operating machinery, or performing other activities that require hearing your
surrounding sound.
It is advised to turn the volume on your device all the way down before
connecting your headphones. Then increase the volume gradually until you
reach a comfortable listening level.
TECHNICAL SPECIFICATIONS
7
•Technology: Bluetooth 5.0, A2DP, HFP, HSP, AVRCP
•Drivers: a 6mm graphene dynamic driver in each earbud
•Sensitivity: 104+/-3dB
•Frequency Range: 20Hz -20kHz
•Impedance: 16ohm
•Microphone: MEMS mic (silicon microphone)
•Microphone Sensitivity: 42+/-3dB
•Microphone Frequency Range: 100Hz -10kHz
•Charge Time: 1.5hours (earbuds) + 2hours (charging case)
•Case Charing Input: 5VDC
•Play Time: 8hours + extra 24hours with charging case
•Battery Type: Li-polymer (60mAh for earbuds, 500mAh for charging case)
•Wireless Communication Range: >10m (No obstacles in the surrounding)
MORE INFORMATION
•Colour Options: silver, gold
•Product Size: 59x49x27cm
•Weight: 4.7g for each earbud, 41.8g for charging case
FAQ
8
Q: Why the earphones have no sound when I first try them on / only one side
has sound?
A: The earphones may shut down if the battery level is too low due to over-
discharge protection. It can be reactivated by charging it for 4 hours. If there’s
still no response, touch and hold the touchpads for 2~3 seconds to activate the
earphones manually. If there’s still no response, use a piece of disinfecting
wipe to clean the charging pins on the earphones and charging case, let it dry,
and then charge it for another 1 hour. The earphones should now function
normally. If there’s still no response from the earphones, please contact us at
support@goodaudio.biz for further investigation.
Table of contents
