Gorenje GV30.1 User manual

EN
DRAFT
Do not print for final production!
Operating Instructions
Dishwasher
GV30.1
3
23 2
14 7
5 6 9
810 13
11 12 14
Time Saver
8
Main power switch
1
Extra Dry
9
Programme selector
2
Half Load
10
Auto wash
3
Delayed Start
11
Heavy wash
4
Display
12
Eco wash
5
Rinse aid indicator
13
Quick wash
6
Salt indicator
14
Rinse
7
2Safety instructions ..................................................
3Before washing for the first time .............................
4Loading the dishwasher .........................................
5Using the dishwasher .............................................
8Settings ...................................................................
9Care and cleaning ..................................................
11Troubleshooting ......................................................
14Installation ..............................................................
15Service ....................................................................
15Information for test institute ....................................
16Technical information .............................................

Safety instructions
General
•Read the operating instructions and keep them
in a safe place!
•Never use the dishwasher for any purpose other
than that specified in these operating
instructions.
•Do not load the dishwasher door or dishwasher
baskets with anything other than dishes.
•Never leave the dishwasher door open as
someone may trip on it.
•Use only dishwasher detergent!
•This machine can be used by children aged 8
and upwards, and by people with reduced
physical capacity, mental ability, memory loss
or lacking experience and knowledge. These
individuals must be supervised when using the
machine or have instructions on how to use the
machine and understand the risks that can
occur. Cleaning of the machine must not be
carried out by children without supervision.
•Children must be watched to ensure they do not
play with the dishwasher.
•Damaged mains cables must only be replaced
by a qualified electrician.
•Only use the dishwasher in household-type
environments for dishwashing household dishes.
All other use is prohibited.
•Never place dishes with solvent residues in the
dishwasher due to the risk of explosion. Nor may
dishes that contain ash, wax or lubricants be
washed in the dishwasher.
WARNING!
Knives and other pointed items must be placed
horizontally in the dishwasher's special cutlery
baskets.
Installation
See the section Installation.
Child safety
•Always start the dishwasher immediately after adding
detergent.
•Keep children away from the dishwasher when the door
is open. Some detergent may remain inside!
•Do not allow children to use or play with the dishwasher.
Be especially vigilant when the door is open.
WARNING!
Children must be supervised –dishwasher detergent is
corrosive!
Winter storage/transport
•Store the dishwasher where the temperature remains
above freezing.
•Avoid long transport distances in very cold weather.
•Transport the dishwasher upright or laying on its back.
Overflow guard function
The overflow protection starts pumping out the machine
and turns off the water supply if the water level in the
dishwasher exceeds the normal level. If the overflow
protection is triggered, turn off the water supply and call
the service division.
Packing material
Please sort waste materials in accordance with local
guidelines.
Disposal
•When the dishwasher has reached the end of its service
life and is to be disposed of, it should immediately be
made unusable. Pull out the power cable and cut it as
short as possible.
•The dishwasher is manufactured and labelled for
recycling.
•Contact your local authority for information about where
and how your dishwasher should be correctly recycled.
2

Before washing for the first time
The water softener
In order to achieve good dishwashing results, the
dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and
the dishwasher.
Water hardness is specified using the following scales: The
German water hardness scale (°dH) and the French water
hardness scale (°fH). A water supply with a water hardness
in excess of 6°dH (9°fH) must be softened. This is done
automatically with the aid of the built-in water softener. In
order for the softener to function optimally, it must be
adjusted to the hardness of the water supply.
Contact the local waterworks to check the water hardness
in your area.
Adjusting the water softener
In section Settings on page 8 the process for setting the
water softener is described. Do not forget to put salt in the
salt compartment after you have set the water softener.
Fill up the salt
Before you begin using a dishwasher with a water softener,
you must fill the salt compartment with salt. Use large grain
salt or special dishwasher salt.
WARNING!
In order to avoid rust stains a dishwashing programme
must be started immediately after adding salt.
Never pour dishwasher detergent into the salt
compartment. This destroys the water softener!
Do as follows the first time:
1Unscrew the lid as illustrated.
2Place the funnel supplied with the dishwasher in the
salt compartment top-up hole. First, pour in about 1 l
of water.
3Then add salt, a maximum of 1.5 kg, until the
compartment is full.
4Wipe up any excess salt so that the lid can be screwed
on firmly.
5Run a programme to ensure that any salt in the
dishwasher is rinsed away.
Salt compartment lid
Refill salt indicator
When the salt needs topping up, the above symbol lights
on the display.
When the salt runs out, unscrew the cap and fill the
container with salt. Water is only needed the first time! Wipe
clean and tighten. Run a programme to ensure that any
salt in the dishwasher is rinsed away.
After topping up, it may take a while before the symbol
goes out.
Top up with rinse aid
Drying is faster and a better result is achieved if you use
rinse aid. You will also achieve a better dishwashing result
with clear and spotless dishes.
1Open the rinse aid compartment lid.
2Carefully top up with rinse aid. Only add rinse aid to
the level marked max.
3Wipe up any splashes of rinse aid around the
compartment.
4Close the lid firmly.
Refill rinse aid indicator
When the rinse aid needs topping up, the above symbol
lights on the display.
After topping up, it may take a while before the symbol
goes out.
Setting the rinse aid dosage
The section Settings describes how to set the rinse aid
dosage. Rinse aid dispensing can be set from 0 (Off) to 5
(High dose). (Factory settings: 5)
Increase the rinse aid dosage:
•If the dishes have water marks.
Decrease the rinse aid dosage:
•If the dishes have a sticky white/blue film.
•If the dishes are streaked.
•Build-up of foam. If you have very soft water, the rinse
aid can be diluted 50:50 with water.
3

Loading the dishwasher
Economic dishwashing
•Do not start the dishwasher until it is fully loaded to save
energy.
•Do not rinse under running water. Simply scrape off
large food particles before loading the dishwasher.
•Choose an environmentally-friendly detergent. Read
the environmental declaration on the packaging!
•If the dishes are only slightly dirty, you can select a
programme with a low temperature.
•Better drying results are achieved if you open the door
a little once the programme has ended. (If the
dishwasher is built-in the surrounding furnishings must
be resistant to any condensation.)
Fragile dishes
Some cookware is not dishwasher safe. This can be for
several reasons. Some materials cannot withstand strong
heat, others can be damaged by dishwashing detergent.
The dishwasher's baskets
The dishwasher is equipped with a top cutlery tray, an
upper basket and a lower basket.
Top cutlery tray
The top cutlery tray has space for cutlery, ladles, whisks,
serving cutlery and similar items.
temporary image
Upper basket
Place glasses, cups, bowls, side plates and saucers in the
upper basket. All dirty surfaces should face inwards and
downwards! Wine glasses are placed on the wine glass
shelf and knives are placed in the knife stand on the right
(if fitted).
temporary image
Raising and lowering the upper basket
1Pull out the upper basket.
2Grab the sides of the upper basket with both hands
and lift it up.
3Repeatedly lift the basket to change its position. (The
upper basket can be set in three positions.) When the
upper basket is in the highest position lifting it will return
it to the lowest position.
image
Foldable tines
The foldable tines can be folded up or down to make it
easier to load pots, bowls and glasses. Release the foldable
tines by pressing the catch inwards before adjusting their
position.
4

Lower basket
Place plates, side plates, serving dishes and pots in the
lower basket.
temporary image
Foldable tines
Fold down the foldable tines (plate supports) when
dishwashing pots. Release the foldable tines by pressing
the catch inwards before adjusting their position.
NOTE!
Check that the spray arms can rotate freely.
Using the dishwasher
Add detergent
1Prewash detergent compartment
2Main wash detergent compartment
Detergent is added according to water hardness.
Follow the instructions on the detergent packaging. This
dishwasher is fitted with a water softener, so use detergent
and rinse aid doses suitable for soft water.
Too much detergent can result in less effective dishwashing
and also entails greater environmental impact.
Add the detergent to the detergent compartment. There is
a compartment for the prewash and one for the main wash.
If powder and liquid dishwasher detergents are used, add
a small amount of the detergent to the prewash
compartment. Contact the detergent manufacturer if you
have questions about the detergent.
NOTE!
Use only dishwasher detergent! Washing up liquid must
not be used as the foam that forms prevents the
dishwasher from operating effectively.
Dishwasher tablets
Halve the tablet if it is difficult to close the dispenser lid.
There is a risk that the detergent will not be released
properly if the lid is tight and will not open correctly.
NOTE!
Dishwasher tablets are not recommended for short
programmes (less than 75 minutes). Use powder or liquid
dishwasher detergent instead.
3-in-1/All-in-one detergent
Read through the directions for these products carefully.
If anything is unclear, contact the detergent manufacturer.
The main power switch
Press and hold the main power switch until the display
lights up.
5

Choose programme
Press the Programme selector one or more times until the
desired programme symbol is activated.
Auto wash
The dishwasher can measure how dirty the dishes are and
adjust water consumption and temperature accordingly.
When newly installed, the programme needs to be run five
times before it is fully adapted and can provide the best
results.
Heavy wash
Programme for very dirty dishes, such as pans, casserole
dishes and oven dishes. If these dishes do not completely
fill the dishwasher, you can add plates and the like.
Eco wash
This programme is intended for cleaning normally dirty
dishes and is the most effective programme in terms of
combined energy and water consumption.
Quick wash
This programme is used for glasses and porcelain that is
slightly dirty, such as coffee cups.
Rinse
Used to rinse dishes while you wait for the dishwasher to
become fully loaded.
Selecting Options
To make a selection press one of the option buttons (certain
options cannot be combined).
Time Saver
This option shortens the programme time, but uses more
energy and water.
Extra Dry
A higher temperature in the final rinse improves the drying
results if you activate this option. Energy consumption is
slightly increased.
Half Load
This option adapts the dishwashing programme to a
half-filled dishwasher, using less energy and water.
Delayed Start
When you select Delayed Start the dishwasher will start
1-24 hours after you close the door.
1Press the button once to activate Delayed Start. Press
the button several times –or hold it in –to set the
desired number of hours.
2Close the door and the dishwasher counts down 1 hour
at a time and starts after the selected delay.
If you want to cancel the Delayed Start option, open the
door and press and hold the main power switch until the
display turns off.
Start the dishwasher
Close the door to start the dishwasher.
Time remaining
Once you have chosen a programme and options, the time
the programme took when last used is displayed.
Stopping or changing a programme
If you want to change programme after starting the
dishwasher, open the door then press and hold the main
power switch until the display turns off. Add more detergent
if the lid of the detergent dispenser has opened. Then press
the main power switch, choose a new programme and
close the door.
Do you want to add more dishes?
Open the door. The dishwasher stops automatically. Add
the dishes, close the door and the dishwasher continues
the programme.
If the dishwasher is switched off using the
main power switch or during a power cut
If the dishwashing programme was not finished, the
interrupted programme continues when power is restored.
NOTE!
During drying, the programme is interrupted if the power
is cut or the door is open for more than 2 minutes.
Once the program has finished
The dishwasher switches off automatically after the
programme ends. Shut off the water tap after each use.
6

Programme chart
Consumption values 1)
Final rinse
Number of rinses
Main wash
PrewashesOptionsDiskmedelProgram
Water
cons. (L)
Hot water 3)
Cold water 2)
Energy (approx. kWh)
Dishwashing time (approx. hrs:min)
Energy (approx. kWh)
Dishwashing time (approx. hrs:min)
Fack 2Fack 1
??-??0.0-0.0???:??-?:??0.0-0.0???:??-?:???? °C?-???-?? °C?-???????Auto wash ??0.0???:??0.0???:???? °C??? °C???????Heavy wash 00.00??0.0???:??0.00???:???? °C??? °C????????
Eco wash 4)
??0.0???:??0.0???:???? °C??? °C???????Quick wash ??0.0???:??0.0???:???? °C??? °C???????Rinse
1) Consumption values vary depending on the temperature of the incoming water, room temperature, load size, selected additional functions and more. 2) Connection to cold water, approx. 15 °C. 3) Connection to hot water, approx. 60 °C. 4) This dishwashing programme is the standard cleaning cycle used to compile the energy labelling information. It is intended for washing normally
dirty dishes and is the most effective programme in terms of combined energy and water consumption.
7

Settings
Open the settings menu:
Turn off the machine. Press and hold the main power switch until the display lights up.1.
Within 10 seconds:
- press the Programme selector and the option button for Time Saver.
2.
+
The display shows the settings menu (current setting and its currently set value).3.
(Exit the menu by browsing through the menu or pressing the main power switch.)
Navigate the settings menu:
Tryck för att lagra inställningsvärdet och
gå vidare till nästa inställning.
Aktuell inställning.
Aktuellt inställningsvärde.
Tryck för att bläddra mellan
inställningsvärden.
You can now adjust the following settings:
OptionsSettings
Rinse aid dosage setting.1:00 - 1:05Rinse aid1.
Adjusting the water softener. Read off the appropriate
setting from the water hardness table below.
°dH
0-5
6-8
9-11
12-14
15-19
20-24
25-29
30-39
40-49
50+
0-9
10-14
15-20
21-25
26-34
35-43
44-52
53-70
71-88
89+
°fH °dH °fH
2:00 - 2:09Water hardness2.
8

Care and cleaning
Coarse filter
The coarse filter traps larger food particles, which cannot
get past the drainage pump. Empty the coarse filter as
necessary.
1Lift the coarse filter by the handle.
2Empty the coarse filter. Remember to replace it!
Coarse filter
Fine filter
Debris that collects on the fine filter is automatically rinsed
away during each wash. However, the fine filter and its pipe
section should be cleaned a couple of times a year.
1Turn the handle anticlockwise.
1x
Fine filter
2Lift the filter straight up using the handle. Free the
coarse filter to clean the fine filter.
3Replace in reverse order. Check that the edges seal
properly when replacing the fine filter.
4Lock the filter in place by turning the handle clockwise
to the stop position. The handle should point straight
out from the dishwasher.
NOTE!
The dishwasher must not be used without the filters in
place!
Dishwashing results may be affected if the coarse filter
is incorrectly fitted.
Drainage pump
The pump can be accessed from inside the dishwasher.
1Cut the power to the dishwasher by pulling out the plug
from the wall socket!
2Remove the coarse filter and the fine filter.
3Remove the small yellow fitted piece on the right in the
bottom drain (see illustration below).
4By inserting your finger into the hole you can turn the
pump blade to release anything blocking it.
5Reinstall the fitted piece and filters.
6Plug the machine in again.
If the dishwasher still does not start and a whirring
sound is heard, the overflow protection has been
activated.
•Shut off the water.
•Remove the plug from the wall socket.
•Call the service division.
NOTE!
Do not forget to reinstall the fitted piece.
Spray arms
Holes and bearings can sometimes become blocked.
Remove any debris using a pin or the like. The spray arms
also have holes underneath.
To facilitate cleaning you can remove the spray arms.
Remember to fit them firmly back into place afterwards.
Lower spray arm
•Pull the lower spray arm straight up to release it.
Upper spray arm
1Pull out the upper basket.
2Unscrew the spray arm bearings counterclockwise to
remove the spray arm from the upper basket.
9

Door
When cleaning the edge around the door, use only a slightly
damp cloth (with a little cleaner if necessary).
Limescale deposits
The dishwasher tub is made of stainless steel and is kept
clean through normal use. If you have hard water, limescale
deposits may build up in the dishwasher. If this happens,
run the Heavy wash programme with two tablespoons of
citric acid in the detergent compartment (with no dishes in
the machine).
Front panel
Keep the buttons clean and free from grease. Wipe them
clean with a dry or slightly damp cloth. Never use cleaners
–they can scratch the surface. Use the main power switch
to turn off the dishwasher before cleaning the buttons to
avoid activating any buttons unintentionally.
10