Gotrax Hoverfly Kart User manual

Hovery Kart
USER MANUAL
TRANSFORM YOUR HOVERBOARD

Congratulations
on your purchase!
This manual is designed to give you the information you need for the
safe operation and maintenance of your new GOTRAX Hoverkart.
Please read it thoroughly before riding your GOTRAX Hoverkart.
WARNING: Make sure you read this complete manual before riding
your GOTRAX Hoverkart. Failure to do so, or failure to follow its
guidelines could lead to serious injury or death.

SECTION ONE of this manual involves safety and GOTRAX Hoverkart
care. Understanding and following this information will help you and your
GOTRAX Hoverkart avoid injury or damage.
SECTION TWO of this manual gives assembly and installation instructions
for your GOTRAX Hoverkart.
SECTION THREE of this manual covers specic safety and operating
instructions for your GOTRAX Hoverkart. Even if you are an experienced
rider, you should review this section before you ride.
SECTION FOUR of this manual covers warranty specications of your
GOTRAX Hoverkart.
Table of Contents

Get to know your Hoverkart
Specications
Compatibility:
Max Load:
Tire Size:
Seat Material:
Most self-balancing hoverboards
See max load of your self balancing hoverboard
4” swivel caster
PP
1
2
3
4
5
6
78
9
2
3
4
6
1. Seat
2. Handle Bars
3. Pedal Mounts
4. Adjustable Strap
5. Seat Frame
6. Locker
7. Frame
8. Foot Rests
9. Front Wheel

Parts
Seat x1
Seat Frame x1
Frame x1
Right Handle Bar x1
Left Handle Bar x1
Strap With Velcro x2
Wrench x1
Allen Wrench x2
Locker x2
8*45 Screw x4
M6*12 Screw x4
8mm Nut x4

Assembling your Hoverkart
If you have questions or concerns about any of these steps, please feel free
to contact our Customer Service Team at [email protected]. Someone
will be in touch to walk you through these steps.
Carefully follow the steps shown on the following pages for assembling the
Gotrax Hoverkart. Remove all Gotrax Hoverkart contents from the box.
Ensure all contents from the “Parts List” section are accounted for.
1. Locate the provided 8*45 Screw and 8mm Nut. Attach the left and
right handle bars to the seat frame as shown below.

2. Insert the frame into the seat frame. Adjust the frame and the seat frame
to your preferred size. Secure the frame in place using the locker.
3. Align the holes of the seat with the seat frame. Secure the seat in place
by M6*12 screws using allen wrench.
4. Your Gotrax Hoverkart is now completely assembled and should look
like the below image.

If you have questions or concerns about any of these steps, please feel free
to contact our Customer Service Team at [email protected] . Someone
will be in touch to walk you through these steps.
Carefully follow the steps shown on the following pages for installing the
Gotrax Hoverkart onto your electric scooter. Read the remainder of this
manual before riding your Gotrax Hoverkart.
Your Gotrax Hoverkart should be completely assembled prior to installing
it onto your electric scooter. Please refer to the “Assembling your Gotrax
Hoverkart” section for assembling procedures.
BEFORE ATTACHING YOUR HOVERKART to your hoverboard, you
must ensure that you have turned off the self-balancing mode.
To turn o self balancing mode on your GOTRAX hoverboard, rst
power on your hoverboard.
Once the GOTRAX Hoverboard is powered on, press the power
button for 2 seconds. You will hear a loud beep that signals that the self-
balancing mode is turned off.
Installing your hoverboard

1. Place the pedal mounts onto the foot pedals of your self-balancing
scooter with the front wheel facing forward. Ensure the pedal mounts
are centered on the foot pedals of your scooter as much as possible.
2. Secure your Gotrax Hoverkart to your self-balancing scooter using both
adjustable straps with Velcro. With the velcro side facing away from
your scooter, attach one hook of each adjustable strap to the back of
each pedal mount.

3. Wrap both adjustable straps under your self-balancing scooter and
attach the second hook of each adjustable strap to the front of each
pedal mount.
4. Adjust both adjustable straps so that they are secured tightly around
your scooter.
5. Your Gotrax Hoverkart should be properly installed onto your scooter
as shown below.

WARNING: Any scooter that does not work properly can cause you to
lose control and fall. Inspect the entire device thoroughly before every ride,
and do not ride it until any problems have been corrected.
Before Riding
It is important that you fully understand all elements of your GOTRAX
Hoverkart. If these elements are not used correctly, you will not have full
control of your GOTRAX Hoverkart. Before you ride fast, or outside of a
controlled environment, lean the functions of the various mechanisms on
your GOTRAX Hoverkart.
Practice using the elements of your GOTRAX Hoverkart at slower speeds in
a at, open area before taking the GOTRAX Hoverkart on public roads.
WARNING: Do not ride a GOTRAX Hoverkart with a part that is
damaged: replace the damaged part before riding.
Hoverkart Operation

Ensure that your GOTRAX Hoverkart and scooter are in proper working
order each and every time you ride. If a part of the GOTRAX Hoverkart
does not function correctly, please contact our Customer Support Center.
• Ensure your tire pressure is at the suggested PSI level for your
scooter before riding.
• Ensure the battery of your scooter is fully charged before riding
your GOTRAX Hoverkart.
• Ensure that the screws on the GOTRAX Hoverkart are locked rmly
before each ride.
• Check to ensure the tires of your scooter are not worn.
• Check to ensure all connections are maintained on your scooter.
Pre-ride Hoverkart Checklist

The rst rule in safe riding is to use common sense. A GOTRAX Hoverkart
is vulnerable. It cannot protect you in a crash, against impact, or loss of
control the driving a car can. A GOTRAX Hoverkart can tip over sideways
or pitch you over the front wheel . It moves faster than a typical scooter. It
does not have bumpers or airbags as a car does. This section is a guide of
safe riding practices for operation. Make sure you are using your GOTRAX
Hoverkart properly.
Different localities and countries have different laws governing riding on
public roads, and you should check with local ofcials to ensure you are
complying with these laws.
GOTRAX Hoverkart is not liable for tickets or violations given to riders who
do not follow these regulations.
• For your safety, always wear a helmet that meets CPSC or CE safety
standards. In the event of an accident, a helmet can protect you from
serious injury and in some cases, even death.
• Obey all local laws, stop signs, pedestrian crosswalks, etc.
• If riding with friends and multiple GOTRAX Hoverkarts, ride single
le in a straight line.
• Have a satisfactory signaling device (bell, horn, etc) to warn drivers
and pedestrians of your approach.
• Ride defensively, expect the unexpected.
Safety Precautions

• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if you intend to
pass them from behind.
• Slow down at all street intersections and look to the left and right
before crossing.
• Obey all trafc signals.
• Always use proper hand signals for turning and stopping. Give
signals 100ft before stopping or turning and always return both
hands to the handlebars before stopping or turning.
• Watch for cars pulling out into trafc and for the sudden opening of
car doors.
• Avoid potholes, drainage gates or other hazards.
• Cross railroad tracks at a right angle.
• Be careful when riding on soft road edges, gravel, sand and uneven
surfaces. Ride slowly and avoid quick turns when riding on these
surfaces.
• Never hitch onto other vehicles.
• Do not “stunt” ride or race in trafc.
• Do not weave in and out of trafc or swerve from side to side.

• A crash can put extraordinary stress on GOTRAX Hoverkart
components, possibly causing them to fatigue prematurely.
Components suffering from stress fatigue can fall suddenly, causing
loss of control or serious injury.
CAUTION: RIDING IN WET WEATHER
Brakes do not work as well under wet conditions as they do when dry.
It is recommended that you do not ride your GOTRAX Hoverkart in wet
weather, as there are electronic components in your scooter that may be
damaged if exposed to water.
1. This product is strictly forbidden to use on roads and highways,
unless your local laws state otherwise. You must wear a safety
helmet, knee and elbow pads and other necessary protective gear
when riding your GOTRAX Hoverkart.
2. Due to the particularity of the product, the assembly pieces are to be
checked before every ride to avoid an accident while riding.
3. Do not make sharp turns as you may drift and over-turn the GOTRAX
Hoverkart, which can result in injury to yourself and/or damage the
unit.
4. Do not operate near swimming pools or other bodies of water.

Riding your Hoverkart
WARNING: To reduce the risk of injury, adult supervision is required.
Never use in roadways, near motor vehicles, on or near steep inclines or
steps, swimming pools or other bodies of water; always wear shoes, and
never allow more than one rider.
Ensure your GOTRAX Hoverkart is fully assembled and correctly installed
onto your scooter with all straps and screws secured in place. Ensure your
scooter is properly maintained as well. Failure to do so may results in serious
bodily harm or death and damage to the unit.
After reviewing the pre-ride checklist, follow the steps below to begin riding
your GOTRAX Hoverkart.
1. Turn on your scooter.
2. Sit comfortably in the GOTRAX Hoverkart seat.
3. Place your feet onto the foot rests.
4. Firmly grip both handlebars and slowly push them downward
simultaneously to move forward.
5. When riding, slowly pull both handlebars upwards simultaneously to
brake.
6. To reverse, slowly pull both handlebars upwards simultaneously
7. To turn right, push the right handlebar down while holding the left
handlebar in neutral position.
8. To turn left, push the left handlebar down while holding the right
handlebar in neutral position.

We frequently update our user manuals at GOTRAX.com, and reserve the
rights to update and change manuals online.
Please contact our customer service team if you are
experiencing problems or need more detailed information.
They can be reached at GOTRAX.com
Warranty
For warranty information, please visit GOTRAX.com.
Troubleshooting

WWW.GOTRAX.COM
#RideGOTRAX

GOLABS, INC
GOTRAX.com
2201 Luna Rd.
Carrollton, TX 75006