Govee H7141 User manual

Govee Smart Humidier

User Manual

Model

H7141

Safety Instructions

Speciﬁcations

Getting Started

Getting to Know Your Smart Humidiﬁer

Filling with Water

Using Your Smart Humidiﬁer

LED Indicators

Pairing Your Smart Humidiﬁer with Govee Home App

Using the Aroma Box

Care & Maintenance

Descaling the Humidiﬁer

Cleaning the Aroma Pad 14

Reassembling

Troubleshooting

Package Includes

Table of Contents

READ AND SAVE THESE INSTRUCTIONS

General Safety

Only use the humidier as described in this manual.

When not in use for an extended period, turn the humidier o and disconnect the plug from the outlet.

Do not use the humidier in wet environments.

Keep the humidier out of reach from children.

Do not attempt to disassemble the humidier or its components.

Always unplug the humidier from power before cleaning it or detaching the water tank from the

humidier base.

Always place the humidier on a at, horizontal surface before using.

Only ll the water tank with clean water. Never ll the water tank with any other liquids.

Do not place the humidier near heat sources such as stovetops, ovens, or radiators.

Do not place the humidier directly on carpets or rugs.

Do not use non-Govee humidier parts as replacement parts for this product.

Do not cover the nozzle while the humidier is on, as this may damage the humidier.

Remove the water tank from the base before moving the humidier.

Do not immerse the humidier base, power cord, or power plug in water.

If the humidier is damaged or is not functioning properly, stop using it and contact

Customer Support immediately.

Not for commercial use. Household use only.

To reduce the risk of re, electric shock, or other injury, always follow all instructions and safety

guidelines.

Ensure that the plug ts properly into a polarized outlet.

Do not handle the power cord or plug with wet hands. Keep the power cord and plug away from liquids.

Your humidier has a polarized plug (one prong is wider than the other), which ts into a polarized outlet

in only one orientation. This is a safety feature to reduce the risk of electric shock. If the plug does not t,

reverse the plug to the correct orientation. If it still does not t, do not bypass this safety feature and try

forcing the plug into the outlet; instead, do not use it with the outlet.

Power Cord & Plug

Do not add essential oils, supplemental water treatment liquids, or water lters into the water tank or

base chamber, as this may damage the humidier and cause leaks.

Only add essential oils to the aroma pad.

Risk of Leaks and Electric Shock

Safety Instructions

LIRE ET CONSERVER CES INSTRUCTIONS

La sécurité générale

Utilisez l'humidicateur seulement comme décrit dans ce manuel.

Lorsqu'il n'est pas utilisé pendant une période prolongée, éteignez l'humidicateur et débranchez la

che de la prise.

N'utilisez pas l'humidicateur dans des environnements humides.

Gardez l'humidicateur hors de la portée des enfants.

N'essayez pas de démonter l'humidicateur ou ses composants.

Débranchez toujours l'humidicateur du secteur avant de le nettoyer ou de détacher le réservoir d'eau

de la base de l'humidicateur.

Placez toujours l'humidicateur sur une surface plat et horizontale avant de l'utiliser.

Ne remplissez le réservoir d'eau qu'avec de l'eau propre. Ne remplissez jamais le réservoir d'eau avec

d'autres liquides.

Ne placez pas l'humidicateur à proximité de sources de chaleur telles que des fourneaux de cuisine, des

fours ou des radiateurs.

Ne placez pas l'humidicateur directement sur des tapis ou des moquettes.

N'utilisez pas de pièces d'humidicateur autres que Govee comme pièces de rechange pour ce produit.

Ne couvrez pas la buse lorsque l'humidicateur est allumé, car cela pourrait endommager l'humidica-

teur.

Retirez le réservoir d'eau de la base avant de déplacer l'humidicateur.

N'immergez pas la base de l'humidicateur, le cordon d'alimentation ou la che dans l'eau.

Si l'humidicateur est endommagé ou ne fonctionne pas correctement, arrêtez de l'utiliser et contactez

immédiatement le service client

Pas pour un usage commercial. Usage domestique uniquement.

Pour réduire le risque d'incendie, de choc électrique ou d'autres blessures, suivez toujours toutes les

instructions et consignes de sécurité.

Assurez-vous que la che s'insère correctement dans une prise polarisée.

Ne manipulez pas le cordon d'alimentation ou la che avec les mains mouillées. Gardez le cordon

d'alimentation et la che à l'écart des liquides.

Votre humidicateur a une che polarisée (une broche est plus large que l'autre), qui s'insère dans une

prise polarisée dans un seul sens. Il s'agit d'une fonction de sécurité pour réduire le risque de choc

électrique. Si la che ne rentre pas, inversez la che dans le bon sens. S'il ne rentre toujours pas, ne

contournez pas cette fonction de sécurité et essayez de forcer la che dans la prise. Au lieu de cela, ne

l'utilisez pas avec la prise.

Le cordon d'alimentation & la ﬁche

N'ajoutez pas d'huiles essentielles, de liquides de traitement d'eau supplémentaires ou de ltres à eau

dans le réservoir d'eau ou la chambre de base. Cela pourrait endommager l'humidicateur et provoquer

des fuites.

N'ajoutez que des huiles essentielles au coussin aromatique.

Le risque de fuites et de choc électrique

La consignes de sécurité

Package Includes

Item

Smart Humidier

Cleaning Brush

Aroma Pads (1 Pre-Installed)

Quick Start Guide

User Manual

Quantity

Speciﬁcations

Power Supply

Rated Power

Water Tank Capacity

Max Run Time (Low Mist Setting)

Noise Level

Eective Range

Dimensions

Weight

AC 120V, 60Hz

Getting to Know Your Smart Humidiﬁer

20W

0.79 gal/3L

≤ 28dB

107–290 ft²/10–27 m²

6.7x 6.7x11.6 inches/17x17x29.5cm

2.65 lb/1.2kg

Up to 30 hours

Note: The humidier may run for a longer

or shorter time depending on the

environmental temperature and humidity.

a. Mist Nozzle

b. Water Tank Cover

c. Max Water Line (Tank)

d. Water Tank

e. Mist Tube

f. Filter

g. Base

h. Air Outlet

i. Micro Switch

j. Indicator Light

k. Power Button

l. Transducer

m. Transducer Heat Sink

n. Float

o. Float Brackets

p. Aroma Box

q. Aroma Pad

r. Air Inlet

s. Screw Nut

t. Noise Silencer

u. Power Cord

v. Cleaning Brush

1. Remove all packaging, tape, and protective foam before rst use.

2. Place the humidier on a hard, at, water-resistant surface. The humidier should be at least

12 inches/ 30cm away from any walls.

3. Mist should be directed away from walls, furniture, bedding, and appliances.

Getting Started

12in/30cm

Remove the tape in the water tank

Remove the foam

Do not add water or essential oils directly into the base chamber.

1. Remove the water tank cover by holding the tank cover and pulling upward.

2. Remove the tank from the base. Fill the tank with room-temperature water.

Do not ll with hot water.

Filling with Water

We recommend using puried or distilled water to ll the tank.

Do not ll past the tank’s max water line.

Note:

Max Water Line

Max

Do not add water or essential oils directly into the mist tube.

Do not add essential oils directly into the humidier. Only add essential oils to the

aroma pad.

Do not use water treatment liquids or third-party water lters with this humidier.

Custom Mode: The humidier will produce mist at the high and the medium setting, before switching

to the low setting.

Auto Mode: When connected to a Govee thermometer hygrometer, the humidier will adjust its mist

according to the humidity value provided by the thermohygrometer.

When detaching the tank from the base: The humidier’s fan will stop within 5 seconds and mist

will stop being produced. If the tank is properly placed back onto the base within 3 minutes, the

humidier will continue working; if not, the humidier will automatically turn o.

No water left in the tank: The humidier will stop producing mist when there is not enough water in

the tank. The fan will stop working within 5 seconds. Once sucient water is added back into the tank,

the humidier will restart after the Power button is pressed.

Using Your Smart Humidiﬁer

3. Reattach the water tank cover and place the tank back on the base.

Besides the on-device buttons, Govee Home App can also be used to control the below

functions (as well as other app functions).

Functions & Controls

1. Plug in your humidier. Press the Power Button repeatedly to cycle through the following mist

settings: Custom Mode, High, Low, and O.

2. During the pairing process, follow in-app instructions to press the Power Button to connect the

humidier with Govee Home App. Press the Power Button for 10 seconds to restore the humidier

to factory settings and disconnect it from Bluetooth and Wi-Fi network.

Note:

Working Status

High mist

Low mist

Tank is detached from base

Indicator Status

High Mist indicator light shows solid blue

Low Mist indicator light shows solid blue

High/Low Mist indicator lights ash red and

dim in 3 minutes

High/Low Mist indicator lights show solid

red and dim in 3 minutes

2. Rotate the nozzle to adjust mist direction.

3. Press the Power Button to turn o the humidier.

LED Indicators

Pairing Your Smart Humidiﬁer with

Govee Home App

No water left in the tank

Custom mode or Auto mode

Display o

Ready for Wi-Fi connection

Wi-Fi connecting

Wi-Fi connected

High/Low Mist indicator lights show solid blue

All indicator lights dim

Wi-Fi indicator light slowly ashes blue

Wi-Fi indicator light quickly ashes blue

Wi-Fi indicator light shows solid blue

Due to ongoing updates and improvements, Govee Home App’s interface and features may

be slightly dierent than those shown in the manual. In case of dierences, follow the

in-app instructions.

1. To download Govee Home App, scan the QR code or search for“GOVEE”in the Apple App

Store (iOS devices) or Google Play Store (Android devices)

1. Pull out the aroma box from the back of the base.

2. Put 8 to 10 drops of essential oil on the aroma pad.

3. Push the aroma box back into the humidier.

4. Turn on the humidier. The humidier will automatically diuse the essential oil.

2. Turn on your smartphone’s Bluetooth.

3. Open Govee Home App, tap the“+” icon in the top right corner, and search for “H7141.”

4. Tap the device icon and follow the on-screen instructions to complete pairing.

Note: Choose“Allow” to the permissions requested when opening Govee Home App for the

rst time.

Note: You can use Govee Home App to connect your smart humidier to Amazon Alexa or

Google Assistant. Follow the in-app instructions to connect Govee Home App to each

voice assistant.

Using the Aroma Box

Do not add essential oils, water treatment liquids, or third-party water lters directly into the

water tank or base chamber. Only add essential oils to the aroma pad.

The aroma pads can be cleaned and reused after diusing essential oils.

The aroma eect is intended to be light. This humidier is not a dedicated aroma diuser.

Note:

Care & Maintenance

Cleaning the Humidiﬁer

The humidier should be cleaned after a week of use or before being stored away.

Cleaning Steps

1. Unplug the humidier.

2. Remove and rinse the water tank cover.

3. Remove the water tank from the base and pour out any water from the tank and base chamber.

4. Rinse the tank and base chamber with room temperature water.

Do not let water into the air inlet or outlet when cleaning the humidier's base with

running water.

If water does accidentally enter the base’s inlet or outlet, place the humidier base in a

ventilated place to dry before using.

Note:

Descaling the Humidiﬁer

1. Fill the tank with 3 cups/ 710 mL of distilled white vinegar.

2. Put the tank cover on and swish the vinegar around the tank.

3. Place the tank on the base and soak for 15–20 minutes. Vinegar will drain into the base

chamber and loosen scale (mineral buildup) in the tank and in the base chamber

(including the transducer and oat).

Note：

It is unnecessary to remove the oat for cleaning in normal circumstances.

If the oat is removed, make sure to place it back in the correct position as inaccurate

positioning may cause the humidier to leak.

4. Remove the tank, remove the tank cover, and pour out all vinegar.

5. Remove the oat from the base chamber by pulling it out of the oat bracket. One side of

this bracket is open to allow the oat’s prongs to be removed from the bracket.

6. Place the oat in a small container. Fill with enough vinegar to cover the oat. Let it soak for

15–20 minutes.

7. Use a soft cloth and the included cleaning brush to remove scale from all parts.

8. Rinse all parts until the vinegar smell is completely gone.

9. Dry all parts with a cloth. Make sure all parts are completely dry before reassembling

or storing.

Cleaning the Aroma Pad

1. Pull out the aroma box from the back of the base.

2. Remove the aroma pad and rinse under warm running water.

3. Dry with a clean cloth and place it back into the aroma box.

Note: Do not pour liquid cleaners or detergents into the aroma pad or box.

Reassembling

The oat must be correctly reconnected if removed. Inaccurate positioning may cause the

humidier to leak.

1. Reinsert the oat back into the base chamber.

a. Lower the oat into the base chamber.

b. Make sure the correct side of the oat is facing up.

c. Place the larger prong into the open side of the oat brackets.

2. Place the tank back on the base. Rell the tank if necessary.

3. Finally, place the tank cover back on the water tank.

Storing

Follow the cleaning instructions and allow all parts to dry completely before storing. Store the

humidier in a cool, dry place.

Troubleshooting

The troubleshooting section below is for solving frequently asked questions for the humidier.

If your problem persists, please contact customer support.

For Smart Humidiﬁer

Problem Possible Solution

Humidier doesn’t turn on.

Makes sure the power cable is securely

connected and press the Power Button again.

The water temperature may be too low. Use room

temperature water.

Add at least 1L of puried or distilled water into the water tank.

Little or no mist comes out.

Turn the mist level to a higher setting.

Add at least 1L of puried or distilled water into the water tank.

There may be too much water in the base chamber. Empty the

base chamber and rell the water tank (not the base chamber)

and place the water tank properly onto the base.

Make sure the air inlet on the bottom of the base is not blocked.

The humidier should not be set on carpet or other surfaces that

may block the air inlet.

Make sure the nozzle is not blocked or clogged.

Make sure the humidier is on a level surface.

Clean the water tank and base chamber.

Set the mist level to a lower setting.

Water temperature may be too low.Turn the mist level to the

highest setting and let the humidier run for a while, then

adjust to the desired setting.

The humidier uses up water based on the environmental

temperature and humidity. If your environment is cold and/or dry,

the humidier will run out of water faster.

If the water tank or base was washed with detergent, rinse

thoroughly with clean water to remove any detergent.

The water usage of the

humidier is too fast.

Humidier produces an

unusual smell.

Humidier makes a loud or

unusual noise.

If the humidier is new, unplug and rinse all parts, then place in

a cool, dry place for 12 hours.

If essential oils were placed on the aroma pad, rinse the pad under

clean water and allow it to dry.

White dust appears around

the humidier.

The humidier may be malfunctioning. Stop using the humidier

and contact Govee Customer Support.

We recommend using puried or distilled water to ll the

humidier. Avoid using water with high mineral content.