GoVideo DV1140 Instruction Manual

Start Here
Unpack Your DV1140
• DVD+VCR
• Remote control
• 1.5V AAA batteries (2)
• RF coaxial cable
• RCA Audio/Video cable
• User’s guide
• Read Me First/Quick Reference Guide
• Registration card
Insert Batteries
1Remove battery cover.
2Insert two 1.5V AAA batteries, paying
attention to the correct polarities (+/-).
3Replace cover.
• CD-ROM, CD+G, and CD-i discs cannot be
played on this DVD player.
Questions?
Our Award-Winning Customer
Service Professionals are
Ready to Help!
Or Check Our
Website!
www.govideo.com
Call Us!
1-800-736-7679
E-Mail Us!
[email protected]
DO NOT RETURN THIS
PRODUCT TO THE STORE!
Thank
You!
For Fast, Friendly
Service
For a Prompt
Reply
For the Latest FAQs
STOP
Rear Panel of DVD+VCR
RF
Coaxial
Cable
RCA A/V
Cables
OR
Television
RCA Audio/Video
Cable
RF Coaxial
Cable
:: Basic Connections
To get started, you will need to connect the DVD+VCR to your TV. The DVD+VCR
clock will be set automatically.
1 Connect Antenna/Cable Connect your antenna or basic cable TV jack to
the ANT. IN jack on the rear panel. See the User’s Guide for cable box/satellite
receiver connections.
2 Connect TV Choose one of the following methods:
a. RF Out Connection Using the supplied RF coaxial cable, connect the RF
OUT jack on the back panel of the DVD+VCR to your TV’s Antenna Input, or...
b. Line Out Connection Using the supplied RCA Audio/Video cable (with
the red, white, and yellow connectors), connect the DVD/VCR OUT jacks on the
back panel of the DVD+VCR to your TV’s Audio/Video In jacks.
3 Plug In Plug in the DVD+VCR.
4 Turn On the DVD+VCR Press the POWER button on the remote control or
front panel of the unit.
5 Turn On Your TV Press the POWER button on your TV.
6 Set Your TV to View the DVD+VCR Turn your TV to channel 3 to view
the DVD+VCR. If you are using the Line Connection method, set your TV to the
appropriate Line or Video input.
• You must use either the RF Out or Line Out connection between your TV
and DVD+VCR, even if you plan to use the S-Video or Component Video
Output for improved DVD picture quality.
• The S-Video and Component Video Outputs are for DVD playback only!
• See the User's Guide for advanced connections.
Antenna/Cable TV Jack
A/V IN
ANT IN
LINE 2 IN
POWER
DV1140
CH
PAUS EPLAYREW STOPFF DVD/VCR VIDEO COPY RECDVD EJECT VCR EJECT L - AUDIO - R

LINE 2 IN
POWER
DV1140
CH
PAUSEPLAYREW STOPFF DVD/VCR VIDEO COPY RECDVD EJECT VCR EJECT L - AUDIO - R
LINE 2 IN
POWER
DV1140
CH
PAUSEPLAYREW STOPFF DVD/VCR VIDEO COPY RECDVD EJECT VCR EJECT L - AUDIO - R
PLAY
PLAY
DVD EJECT DVD EJECT
To Play a VHS Tape
1Insert a VHS tape into the VCR deck. The DVD+VCR will power on automatically when you insert the tape.
2Press PLAY to begin playback.
To Play a DVD or CD
1Press EJECT on the remote control or DVD EJECT on the front panel to open the disc drawer. The DVD+VCR will power on
automatically when you open the disc drawer.
2Place the disc in the drawer with the label side facing up. If the disc has two sides, place the disc with the desired side facing up.
3Press EJECT or DVD EJECT again to close the disc drawer.
4Press PLAY to begin playback. Many discs will begin playback automatically when the disc drawer closes.
• If the DVD has a disc menu, or more than one title, the disc menu may appear.
If so, press / and / to highlight menu items, then press ENTER to make
selections.
©2004 GoVideo. All rights reserved.
:: Basic Controls
Two Decks, One Set of Controls!
:: Basic Disc Playback
:: Basic VCR Playback
• If the tape is missing the record safety tab and Auto Play is turned
on, the tape will begin playing automatically.
VCR Button - Press to control the
VCR deck. All deck control keys
and red labeled buttons will operate
the VCR.
DVD Button - Press to control
the DVD deck. All deck control
keys and blue labeled buttons
will operate the DVD player.