Graco RoadLazer 234672 User manual

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2004, Graco Inc. is registered to I.S. EN ISO 9001
310664A
Parts
RoadLazer®Skid-Mount OEM
Striping Package
Model 234672
Hydraulic Stainless Steel
2000 psi (138 bar) Maximum Working Pressure
- For OEM use in customized line striper applications only -
Read warnings and instructions in this
manual and provided in Operation manual
308611
ti4748a

Manual Conventions
2310664A
Contents
Manual Conventions . . . . . . . . . . . . . . . . . . . . . . . . .2
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
RoadLazer Line Striper Kit Components 5
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Pump System 6
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Regulator 8
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Engine System 10
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Battery System 12
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Main Base Assembly (page 1 of 2) 14
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Main Base Assembly (page 2 of 2) 16
Main Base Assembly Parts List
(page 2 of 2) 16
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Graco Standard Warranty . . . . . . . . . . . . . . . . . . . 18
Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . 18
Manual Conventions
Note
WARNING
WARNING: a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
Warnings in the instructions usually include a symbol
indicating the hazard. Read the general Warnings
section for additional safety information.
Hazard Symbol
CAUTION
CAUTION: a potentially hazardous situation which, if
not avoided, may result in property damage or
destruction of equipment.
Additional helpful information.

Warnings
310664A 3
Warnings
The following are general Warnings related to the safe setup, use, maintenance and repair of this equipment. Addi-
tional, more specific warnings may be found throughout the text of this manual where applicable.
WARNING
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop
cloths (potential static arc).
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes
are present.
• Ground equipment and conductive objects in work area. See Grounding instructions.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail.
• If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment
until you identify and correct the problem.
INJECTION HAZARD
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just
a cut, but it is a serious injury that can result in amputation. Get immediate medical attention.
• Do not point gun at anyone or at any part of the body.
• Do not put your hand over the spray tip.
• Do not stop or deflect leaks with your hand, body, glove, or rag.
• Do not spray without tip guard and trigger guard installed.
• Engage trigger lock when not spraying.
• Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,
checking, or servicing equipment.
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated system
component. See Technical Data in all equipment manuals.
• Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all
equipment manuals. Read fluid and solvent manufacturer’s warnings.
• Check equipment daily. Repair or replace worn or damaged parts immediately.
• Do not alter or modify equipment.
• For professional use only.
• Use equipment only for its intended purpose. Call your Graco distributor for information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
• Do not use hoses to pull equipment.
• Comply with all applicable safety regulations.
PRESSURIZED ALUMINUM PARTS HAZARD
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids
containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical
reaction and equipment rupture, and result in death, serious injury, and property damage.

Warnings
4310664A
CARBON MONOXIDE HAZARD
Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon mon-
oxide can cause death. Do not operate in an enclosed area.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or
swallowed.
• Read MSDS’s to know the specific hazards of the fluids you are using.
• Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in the operating
area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic
fumes, burns, and hearing loss. This equipment includes but is not limited to:
• Protective eyewear
• Clothing and respirator as recommended by the fluid and solvent manufacturer
•Gloves
• Hearing protection
WARNING

Parts
310664A 5
Parts
RoadLazer Line Striper Kit Components
ti4742a
Pump System Regulator
Programmable
Skipline Controller
(manual 308616)
Battery System
Pallet Base
page 6 page 8
Engine
System
page 10
page 12
page 14 and 16
Guns
page 6

Parts
6310664A
Parts
Pump System
Ti4744a
C
A
B
1-Pump System
2-Pump System
A
B
C
1-Pump System
2-Pump System
3-Pump System
64,119
74
64,120
64,121
86
117
87
88
173
90
93
93
89
91
46
47
48
48
47
46
50
49
55
141
51
51
52
53
54
45 72
87
153
21
149
40
41
42
147
39
29
14
79 152
22
23
23
94 18
174
192
200
201

Parts
310664A 7
Pump System Parts List
Ref.
No. Part No. Description Qty.
14 101566 NUT, lock 22
18 113300 BELT, vee 1
21 112796 COMPRESSOR, air 1
22 107129 BOLT, round head 4
23 111040 NUT, lock, insert, nylock, 5/16 in. 8
29 100004 SCREW, cap, hex hd 14
39 159239 FITTING, nipple, pipe, rdcg 1
40 112795 REGULATOR, unloader 1
41 158683 FITTING, elbow, 90° 1
42 113286 VALVE, safety 1
45 238349 PUMP, paint, line striper 3
46 113607 FITTING, barb, 1 in. 6
47 101818 CLAMP, hose 8
48 191627 HOSE, suction 3
49 113606 FITTING, tee 3
50 113561 PLUG, pipe 3
51 191624 TUBE, suction 3
52 191635 STRAINER, inlet 3
53 176684 ADAPTER, bung 3
54 100220 SCREW, thumb 3
55 191641 CAP, splash 3
64 191645 HOSE, coupled, 24 in. (61 cm) 3
72 191647 HOSE, coupled, 27 in. (68.5 cm) 3
74 235208 FITTING, union, swivel 3
79 191688 GUARD, belt, comp 1
86 166469 NIPPLE, pipe, hex 3
87 238782 FILTER, fluid, sst 3
88 501684 VALVE, check 3
89 166866 ELBOW, street 3
90 166846 FITTING, adapter 3
91 238967 VALVE, ball, heavy duty 3
93 220285 CAP 3
94 113687 FILTER, intake 1
117 102814 GAUGE, pressure, fluid 3
119 054163 TUBE, polyolefin, shrink REF
120 054747 TUBE, polyolefin, shrink, blue REF
121 054748 TUBE, polyolefin, shrink, green REF
141 113797 COLLAR, screw, set 3
147 100286 ELBOW, street 1
149 162449 FITTING, nipple, reducing 1
152 109468 SCREW, cap, hex hd 4
153 239022 BRACKET, comp, painted 1
173 112026 ELBOW, street 3
174 111697 PLUG, pipe 3
192 191731 EXTENSION, pipe, pump 3
200 238329 GUN, spray, bead (manual 308612) 1
201 238332 GUN, spray, auto (manual 308613) 1
Ref.
No. Part No. Description Qty.

Parts
8310664A
Parts
Regulator
Regulator Parts List
3
15
3
17
3
2
4
7
6
5
10
9
13
12
3
1
14
ti4743a
Ref.
No. Part No. Description Qty.
1 113291 REGULATOR, air 1
2 108124 VALVE, safety 1
3 100840 ELBOW, street, 1/4-18 npt 4
4 159239 NIPPLE, reducing, 1/2 in. npt x 3/8
in. npt, 1-5/8 in. (41 mm) long
REF
5 113292 VALVE, ball, 3-way 1
6 166999 ELBOW, 90° street, reducing
1/4 in. npt (f) x 1/2 in. npt (m)
1
7 113319 FITTING, air, 3/8 OD x 1/4-18 npt 1
9 157191 NIPPLE, reducing 3/4 in. npt x
1/2 npt, 1-7/8 in. (46 mm) long
1
10 158683 FITTING, elbow, 90°, 1/2-14 npt(f) x
1/2-14 npt(m)
1
12 100030 BUSHING 1
13 104655 GAUGE, pressure, air 1
14 112790 CONNECTOR, tube, 1/4-18 npt 1
15 113548 TEE, 1/4-18 npt 1
17 159841 ADAPTER, 1/4-18 npt(f) x
3/8-18 npt(m)
1
18 070408 SEALANT, pipe, sst (not shown) 1
Ref.
No. Part No. Description Qty.

Notes
310664A 9
Notes

Parts
10 310664A
Parts
Engine System
1(Ref)
82
16
17
19
63
47
100
99
435 (REF)
6676
75
64,121
60
130
65
56
57
32
59
61
65
133
66 68 69
64,119
58
64,120
160
123
118
150
15
27
28
26
78
30
85
83
154
98
129
130
1(Ref)
25
20
20
14
77
112
36
84
31
85
31
30
29
34
33 96
96a
155
ti4745a
1

Parts
310664A 11
Engine System Parts List
Ref.
No. Part No. Description Qty.
1 113287 ENGINE, Kohler, 18 hp 1
14 101566 LOCKNUT, nylon, 3/8-16 REF
15 106063 COUPLING, flexible 1
16 113295 SHEAVE, 1 groove, ‘B’ 1
17 801376 BUSHING, H-1.125 1
19 605358 KEY, sprocket 1
20 100132 WASHER, flat 11
26 191620 SUPPORT, pump 1
27 100052 WASHER, lock 4
28 107143 CAPSCREW, soc hd, grade 5,
7/16-14 unc-3a; 1.25 in. (31 mm)
long
4
29 100004 CAPSCREW, hex hd, grade 5,
7/16-14 unc-2a; 1.25 in. (31 mm)
long
REF
30 100023 WASHER, flat 2
31 100133 WASHER, lock, 3/8 in. 4
32 191253 PUMP, vane 1
33 100187 NUT, grade 5, 5/16-24 1
34 219099 KNOB, pump 1
36 100022 CAPSCREW, hex hd, grade 5,
1/4-20 unc-2a; 3/4 in. (19 mm) long
4
41 158683 ELBOW, 90°, 1/2-14 npt(f) x
1/2-14 npt (m)
REF
56 158491 NIPPLE, 1/2 in. npt x 1/2 npt,
1-5/8 in. (41 mm) long
1
57 113613 ADAPTER, female pipe, 1/2-14
npt(f) x 1-1/16-12 unf-2a
1
58 192045 MANIFOLD, valve 1
59 104813 PLUG, pipe; 3/8-18 npt 1
60 110311 NIPPLE, straight; 3/8-18 npt(f) x
3/4-16 unf
3
61 113703 REGULATOR, hydraulic flow 3
63 191648 HOSE, 1 in. ID 1
64 191645 HOSE, coupled, 29.5 in. (75 cm) REF
65 210658 VALVE, ball REF
66 107050 INSERT, hose, beaded 4
68 102473 CLAMP, hose 2
69 191649 HOSE, 0.63 in. ID, 15 in. (38 cm) 1
75 107032 ELBOW, 90°, 3/8-18 npt 1
76 156022 ADAPTER, 3/8 in. npt x 1/2 in. npt,
1-1/2 in. (38 mm) long
1
77 191686 GUARD, top, left 1
78 191687 GUARD, top, right 1
80 191686 GUARD, top, left 1
81 191687 GUARD, top right 1
82 191695 GUARD, motor, front 1
83 191696 GUARD, belt, lower 1
84 113609 BUMPER, nylon 4
85 100575 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 5/8 in. (16 mm) long
2
96 238681 TANK, fuel 1
96a 113371 HOSE, fuel line 1
98 113372 COUPLING, fuel line 1
99 100549 ELBOW, street pipe, 90° 1
100 107049 INSERT, hose, beaded 1
101 113681 SPRING, compression (not shown) 1
112 100015 NUT, hex, grade 5, 1/4-20 unc-2b 2
118 112179 SCREW, mch, grade 5, M5 x 12 2
123 191863 GUARD, hose 1
129 100195 NIPPLE, pipe, 3/8-18 npt 1
130 165472 ELBOW, pipe, 90°, 3/8 npt(f) 1
133 107053 ELBOW, street, 3/8-18 npt(f) x
1/2-14 npt(f)
1
150 100421 SCREW,set grade 5, 5/16-18
unc-3a, 0.375 in. (10 mm) long
2
154 192228 BRACKET, fuel coupler 1
155 111445 SCREW, drive 3
160 150286 ADAPTER, 3/8 in. 1
435 238346 HOSE, 0.63 in. ID, 19 in. (48 cm) 1
Ref.
No. Part No. Description Qty.

Parts
12 310664A
Parts
Battery System
Regulator Parts List
ti4749a
4
36
112
12
7
85
6
10
25
20
14
67
36
12 112
13
9
12
11
10(Ref)
9(Ref)
Ref.
No. Part No. Description Qty.
4 115753 BATTERY, 33 AH, sealed 1
5 107072 CABLE, electric, negative 1
6 107073 CABLE, electric, positive 1
7 801958 PROTECTOR, terminal, red 1
8 801959 PROTECTOR, terminal, black 1
9 803525 BOLT, battery 2
10 107069 CLAMP, battery 1
11 100527 WASHER, wrought 2
12 100016 WASHER, lock 4
13 102040 NUT, lock, hex 5
14 101566 NUT, lock 22
20 100132 WASHER, flat 11
25 111803 SCREW, cap, hex hd 5
36 100022 SCREW. cap, hex hd 5
67 801972 PAD, battery 1
112 100015 NUT, hex mscr 2
Ref.
No. Part No. Description Qty.

Notes
310664A 13
Notes

Parts
14 310664A
Parts
Main Base Assembly (page 1 of 2)
184
183
ti4746a
95
80
81
107
14
125
145
406
407
408
431436
436
435
434
436
431
411
412
428
409
412
25
24
410
409
438
402
2
104
410
170
128
14
20

Parts
310664A 15
Main Base Assembly Parts List
(page 1 of 2)
Ref.
No. Part No. Description Qty.
2 248422 Base RoadLazer Palletized 1
14 101566 LOCKNUT, nylon, 3/8-16 22
20 100132 WASHER, flat 11
24 113619 IDLER, vee, pulley 1
25 111803 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 2 in. (51 mm) long
5
80 191690 GUARD, belt, front 1
81 191697 GUARD, belt, side 1
95 100531 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 2.5 in. (63.5 mm)
long
5
104 115501 SENSOR, proximity 1
107 107257 SCREW, thd forming, hex, washer
hd, grade 5, 1/4-20 unc-3a, 0.50 in.
(13 mm) long
2
125 191855 PLATE, logo 1
128 111583 PAD, vibration, motor 4
145 187797 SPACER, duct 2
170 114040 CAP, connector, weathertight 1
183 113603 CAP, hub 1
184 191965 RING, rubber 1
400 248422 MAIN BASE ASSEMBLY (includes
40 to 459). Also page 16.
401 238337 BASE, main 1
405 100731 WASHER 6
406 100469 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 3/4 in. (19 mm) long
5
407 191248 BASE. pump mount 1
408 113597 COOLER, air 1
408a 240798 KIT, motor and fan replacement 1
409 100424 SCREW 4
410 801020 NUT, lock, hex, grade 5, 1/2-13
unc-2b
4
411 100454 CAPSCREW, hex hd, grade 5,
3/8-16 unc-2a, 7/8 in. (22 mm) long
4
412 101566 LOCKNUT, grade 5 20
428 113667 BUSHING, nylon 1
431 107050 INSERT, hose, beaded 4
434 191650 HOSE, 0.63 in. ID, 14 in. (36 cm) 1
435 191651 HOSE, 0.63 in. ID, 19 in. (48 cm) 1
436 102473 CLAMP, hose 4
438 109570 WASHER, plain 4
Ref.
No. Part No. Description Qty.

Parts
16 310664A
Parts
Main Base Assembly (page 2 of 2) Main Base Assembly Parts List
(page 2 of 2)
72
62
71
62
70
416
417
418
419
420
414
421
422
423
24
402
63
47
430
429
69
68
431
431
436
434
433
432
427
426
404
413
415
73
62
108
109
109
44
43
415
ti4747a
Ref.
No. Part No. Description Qty.
24 113619 PULLEY, idler, vee 1
43 109570 WASHER, plain 1
44 801020 NUT, lock, hex, grade 5, 1/2-13
unc-2b
1
47 101818 CLAMP, hose 1
62 157785 UNION, swivel; 3/4 npt(m) x 3/4
npsm(f) carbon steel
3
63 191648 HOSE, 1 in. ID, 9 in. (X mm) long 1
68 102473 CLAMP, hose 1
69 191649 HOSE, 0.63 in. ID, 12 in. (X mm)
long
1
70 160032 NIPPLE, 3/4-14 npt(f) 1
71 111337 TEE, street, 3/4-14 npt(f) 2
72 191647 HOSE, coupled, 27 in. 1
73 113671 ELBOW, 3/4-14 npt(f) 1
108 191656 BRACKET, manifold 1
109 106285 U-BOLT, grade 5, 2 x 1/4-20 unc-2a 1
400 248422 MAIN BASE ASSEMBLY (includes
items 401 to 438).
402 238787 RESERVOIR, hydraulic 1
404 102040 NUT, lock, hex, grade 5, 1/4-20
unc-3b
12
413 191634 GASKET, reservoir 1
414 238818 COVER, reservoir 1
415 107074 BREATHER 1
416 178794 FILTER, fluid 1
417 500054 BUSHING, hex hd, 1-11.5 npt(f) x
1-1/4-11.5 npt(m)
1
418 100485 NIPPLE, pipe 1
419 100474 COUPLING, pipe 1
420 107067 PACKING, o-ring 1
421 178750 FITTING, return, 1-11.5 npt(m) x
3/4-14 npt(f)
1
422 105429 NUT, seal, grade 5 1
423 160327 UNION, angle adapter, 3/4-14
npsm x 3/4-14 npt(f)
1
424 106114 STRAINER, inlet 1
426 104444 PACKING, o-ring 1
427 104126 PLUG, boss 1
429 100549 ELBOW, street, pipe, 90° 1
430 107049 INSERT, hose, beaded 1
431 107050 INSERT, hose, beaded REF
432 101353 NIPPLE, pipe 1
433 103475 TEE, pipe, 1/2-14 npt(f) 1
434 191650 HOSE, 0.63 in. ID, 14 in. (36 cm) REF
436 102473 CLAMP, hose REF

Technical Data
310664A 17
Technical Data
*Sound levels measured at 3.1 ft (1 m) under maximum operating conditions per ISO3744.
Kohler®is a registered trademark of the Kohler Co.
Maximum Working Pressure
Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 psi (138 bar)
Hydraulics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 psi (103 bar)
Glass bead system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 psi (5 bar)
Maximum Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 gpm/pump @ 2000 psi (138 bar)
Operating Pressure of Air-actuated Trigger
Minimum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 psi (3 bar)
Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 psi (12 bar)
Sound Levels*
Sound power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99.4 dB(A)
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.5 dB(A)
Weight (empty / full)
Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kohler®18 HP
Fluid Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f) air inlets
Hydraulic Oil Reservoir Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 gallons (45 liters)
Glass Bead Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 lb (136 kg)
Wetted Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . tungsten carbide, 303, 316 & 415 series stainless steel;
PTFE, acetal homopolymer, leather

Graco Standard Warranty
18 310664A
Graco Standard Warranty
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or
maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these
warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the
negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,
given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la
rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite
de ou en rapport, directement ou indirectement, avec les procédures concernées.
Graco Information
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
or call 1-800-690-2894 to identify the nearest distributor.
All written and visual data contained in this document reflect the latest product information available at the time of publication. Graco reserves the
right to make changes at any time without notice.
Sales Office: Minneapolis
International Office: Belgium, Korea, Hong Kong, Japan
GRACO INC., PO Box 1441, Minneapolis, MN 55440-1441
www.graco.com
PRINTED IN USA 310664 06/04